Jump to content

Mercedes E320 CDI S211, Shite or Shiteable?


Recommended Posts

Posted

Failed the Mot, rust hole on the front offside chassis and an ARB ball joint gaiter. Rear brakes could do with a good coat of looking at to improve an imbalance. Chatting to the owner tomorrow. 😔

Posted
  On 20/06/2021 at 06:05, sierraman said:

That’s nowt! Mornings work!

Expand  

Not the way I do weld repairs!! 😁

  • 2 weeks later...
Posted

The car is mine now,  made a start this evening stripping it out to do the welding. I hate digital camera flash photography as any rusty mark looks like an Mot failure!

20210630_230224.thumb.jpg.2aef4ff564281b59fd8202ea1afa776d.jpg

What the heck is a motorcycle battery doing hiding under the pollen filter?

20210630_230313.thumb.jpg.c5825c77e14a03f392bf67e767b5df66.jpg

 

  • Like 2
Posted

Here's my dad's 2003 E320 doing its best subsidence impression.

13d0b827f36ecda08557b04dd004253d.jpg

That engine and gearbox combo (3.2 and just the 5GTronic) appear to be pretty much unburstable, though.

Sent from my SM-G960F using Tapatalk

  • Like 3
Posted

Your secondary battery should have a nice plastic cover over it secured by a not so nice 10mm plastic nut.  The cover looks like it has been awol for a while.

Posted
  On 01/07/2021 at 09:32, colino said:

Your secondary battery should have a nice plastic cover over it secured by a not so nice 10mm plastic nut.  The cover looks like it has been awol for a while.

Expand  

Do you mean the pollen filter or should there be another cover over the battery?

20210701_121854.thumb.jpg.a9c642e7391f0d3e086f0c18de0a1708.jpg

20210701_121903.thumb.jpg.e10d600cdf54b593f2e421790e002b53.jpg

Stripped out for access and blatted over with the needle scaler. Looks much better without the camera flash!

20210701_121556.thumb.jpg.ebf21d2d9734c6284c117067e93b84dc.jpg

  • Like 3
Posted
  On 30/06/2021 at 22:20, rantingYoof said:

That engine and gearbox combo (3.2 and just the 5GTronic) appear to be pretty much unburstable, though.

Expand  

They are also, despite the weight of the car, quite surprisingly fast.  Not in a sports-car-very-urgent-power-delivery kind of way, more in a refined-large-shove-of-torque kind of way, and before you know it you're well past 100mph and into license-losing territory.

  • Like 4
Posted

What a horrible design that chassis rail is. All new metal in place of the rot, not my finest work but solid. Finishing off in the morning. 

Posted
  On 01/07/2021 at 11:49, Talbot said:

They are also, despite the weight of the car, quite surprisingly fast.  Not in a sports-car-very-urgent-power-delivery kind of way, more in a refined-large-shove-of-torque kind of way, and before you know it you're well past 100mph and into license-losing territory.

Expand  

Yes, the torque is silly. Diesel levels of shove, helped by a gearbox not afraid to keep it in gear. Peculiar noise from the 18v engine, too.

  • Like 1
Posted
  On 01/07/2021 at 22:33, rantingYoof said:

Peculiar noise from the 18v engine, too.

Expand  

I think it has a very purposeful growl.  Especially at about 1200rpm under gentle acceleration.  At full chat they sound quite aggressive.

  • Like 2
Posted

I shall hopefully be experiencing all of this torque later today as I have not driven it on the open road as yet.

Posted

Compared to a Vectra 150, I expect you'll go "blimey, that's actually fairly quick..."

  • Haha 1
Posted
  On 02/07/2021 at 06:15, Talbot said:

Compared to a Vectra 150, I expect you'll go "blimey, that's actually fairly quick..."

Expand  

Looking forward to it and the slush box, particularly on a hill I drive up on the way to work in the morning where there is usually some scrote in a white van or Corsa trying to overtake to get one car closer to their death.

That old Vauxhall Rectum could still lift its skirts and trot on quite nicely leaving an industrial revolution sized cloud of soot behind it, much to the annoyance of men in lycra riding two abrest. 😳

Big torque, I drove an S65, it was the CEO of Mercedes chauffeur driven car at the time and that had almost relentless refined acceleration for such a big car. On the flip side,  a 427 Cobra is quite something too in a real visceral way. 😎

  • Haha 2
Posted
  On 02/07/2021 at 08:17, Snake Charmer said:

leaving an industrial revolution sized cloud of soot behind it

Expand  

Nicked. :mrgreen:

Posted
  On 02/07/2021 at 06:15, Talbot said:

Compared to a Vectra 150, I expect you'll go "blimey, that's actually fairly quick..."

Expand  

The Vectra 150 was actually quite a quick car. 

Posted

It's not the smoothest or most refined engine, but it does the job without ever feeling underpowered or strained. Exceptionally thirsty though. Far more than the V8 in the Lexus.

Given a blank cheque I'd be putting the 3.2 in the Insignia because while the 1.5T also does the job it has hilarious lag and quickly feels like a small engine that's been wound up hard.

Sent from my SM-G960F using Tapatalk

Posted

My dad was making noises about upgrading to an Insignia petrol, it’s very hilly where he lives and it’s usually full of luggage. I did point him in the direction of the diesel, there won’t be any low emission zones where he lives in the sticks. 

  • Like 1
Posted
  On 02/07/2021 at 08:18, Talbot said:

Nicked. :mrgreen:

Expand  

It was already there Ossifer, I drove through it!

Posted
  On 02/07/2021 at 09:22, rantingYoof said:

Exceptionally thirsty though. Far more than the V8 in the Lexus

Expand  

Are you talking about the same engine here?  The E320 CDi diesel?  They will average 40 and get 45 on a decent run.  I cannot imagine a V8 lexus getting anywhere near that.

Posted

Retest done this afternoon and I'm on the road. Spent a good day on the repair, not pretty but all new metal and solid. Brush painted with Epoxy Mastic 121 which made it look a MkII Escort on any Thursday morning in the Thames Valley Trader 1985.

Drives well, a few creaks and seems to stay on line through fast bends for a big old barge on cheap tyres. Everything works apart from one mirror doesn't fold fully back and the load cover intermittently doesn't retract but the motors work OK. Did a little motorway work and stop start traffic, liking it so far.

20210701_121556.thumb.jpg.621d50055746f140e26f4a0d2080c55b.jpg

20210702_094006.thumb.jpg.a625f6f7abdf79e16789b859d8dda67d.jpg

Posted
  On 02/07/2021 at 13:42, Talbot said:

Are you talking about the same engine here?  The E320 CDi diesel?  They will average 40 and get 45 on a decent run.  I cannot imagine a V8 lexus getting anywhere near that.

Expand  

Whoops...nah I'm on about the 3.2 petrol!

  • Like 1
  • Haha 1
Posted
  On 02/07/2021 at 20:52, Snake Charmer said:

not pretty but all new metal and solid.

Expand  

... very nice welding tho.

How quick are you finding it?

Posted
  On 02/07/2021 at 23:10, Talbot said:

... very nice welding tho.

How quick are you finding it?

Expand  

Thanks, at least the outer plate looks half decent! Short of taking the wing, suspension and inlet manifold off access is pretty poor in that area and the horrible chassis rail design doesn't lend itself to an easy repair.

I really like the torque and the seemingly effortless way the car drives. I will be exploiting the performance some more this morning as I'm off to look at some 18" wheels and possibly a V40 for parts. 

Posted

Did about 80 miles or so today, motorway,  A roads and a bit of town work, saw over 40mpg on the motorway at 56-60mph and averaged 38 overall so I'm happy with that.

Gearbox is a bit hesitant when you accelerate after slowing down and doesn't seem on the ball with selecting a lower gear when labouring uphill.

Four 18" wheels will fit with the seats up easily so putting the seats down was just showing off.

Sport mode just seems to be an on off button and needs more exploration.

I like the brake hold in traffic and the fact you can drop into neutral. 

Dropping a gear or two on the cruise control is nice too but I think the gearbox controller should be doing that.

Stopped in Alton to take a photo where my brother had his first house and sent it to my nephew in Australia. 

 

20210703_103631.jpg

  • Like 2
Posted
  On 03/07/2021 at 17:57, Snake Charmer said:

Gearbox is a bit hesitant when you accelerate after slowing down and doesn't seem on the ball with selecting a lower gear when labouring uphill.

Expand  

That's surprising.  However, I think yours is a 7G-tronic, which I'm not familiar with.  The earlier 5G-tronic is good at changing down when you're labouring uphill, but just as dim-witted when it comes to choosing a gear to be in when you exit a roundabout or similar.  It's also a lot of the reason why there's a significant delay between foot movement and vehicle acceleration... if locked in one gear the response time between them is a lot faster.

It's not a bad automatic by any standards, I'd just still massively prefer a manual.

  • Like 1
Posted

Mine seems to be a 5 speed, if I knock the lever left from D I get 4 on the display. There is a slight vibration in top at around 55 that disappears if you drop into 4th. Changing manually is super smooth, maybe a gearbox service would improve matters but it's early days.

These 18" wheels came up cheap from a CLC, as usual they need refurbishing and one of the fronts has a crack. 7.5J and 8.5J, quite tempted to get another pair of 8.5J to fill the front arches. Hard to see the difference in the photos of the rears on the front as I need a set of longer bolts before I can try them for size properly. Before anyone says it, I am aware the C Class uses 12mm bolts and the E  Class 14mm, a little engineering will circumnavigate that wee problem. 👍

20210703_154207.thumb.jpg.b0617096a2655e0a3f856b14a1d1d96f.jpg

20210703_155027.thumb.jpg.a8f14bc31be4a359109a1b5909146cdc.jpg

 

 

Posted
  On 04/07/2021 at 05:41, Snake Charmer said:

if I knock the lever left from D I get 4 on the display.

Expand  

Yes, that's a 5g-tronic with the later +/- selector rather than the D54321 selector.  What colour is the fluid in it?

Posted
  On 04/07/2021 at 07:10, Talbot said:

Yes, that's a 5g-tronic with the later +/- selector rather than the D54321 selector.  What colour is the fluid in it?

Expand  

I'm not sure it has a dipstick other than me! I noticed the engine only has a cap rather than a dipstick, I will have a look later.

Posted

it won't have a factory dipstick.  However, you can use a length of net curtain rod.  it has just the right amount of flexibility, and has a pvc coating which allows it to slide in just perfectly.  You push it in all the way until it goes "dink" on the sump.  I can't remember the correct level up from there (when running, with the valve chest full of fluid) but it's only about 2"-3" up from the sump pan.

Like almost all Auto-transmissions, they need clean fluid and need to be full.  I rather need to change the oil in mine soon as it's a bit grotty, and I think it's affecting change quality.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...