Jump to content

๐Ÿ˜Ž.. SavvGetzWiththeprogram


Recommended Posts

Posted

Caliper all done ๐Ÿฅ‚

My extremely 'tight fit' deep sockets came to the rescue with the Banjo Bolt... Quite some shoulder required but NO slip off! โ™ฅ๏ธ

ย 

IMG_20240106_110537.jpg

Vac hose to do bleeding ...

ย 

IMG_20240106_105316.jpg

Inventive means to top-up fluid ๐Ÿ™„

IMG_20240106_104556.jpg

.... Siezed Solid ๐Ÿคฌ

ย 

IMG_20240106_103305.jpg

๐Ÿš™๐Ÿ’จ

Posted

All sweet, after a week....

Nice firm pedal ๐Ÿ˜Ž

๐Ÿš™๐Ÿ’จ

  • Like 2
Posted

Caliper ยฃ34.99 del + ยฃ6.99 DOT4 0.5L

...... Ah, these creaky old crocks ๐Ÿš™๐Ÿ’จ

  • Like 3
Posted

Well..... At ยฃ3.08 delivered ... ๐Ÿš€

ย 

IMG_20240115_164045.jpg

IMG_20240115_164357.jpg

  • Like 2
  • 2 weeks later...
Posted

Well, all my fellow 'driveway spanner monkeys'... The day has [eventually ๐Ÿ™„] arrived!!

#1.. Bright

#2.. Dry

#3.. Not blowing a gale*

*Yes... Doing a simple oil change (dropping from the sump, not Pela) is a ba$tard in the wind as it blows all over the place + me!

Just tipped 77,000 ๐Ÿš™๐Ÿ’จ

  • Like 3
Posted

Usual ffinn messy crap..... ๐Ÿ™„

ย 

IMG_20240127_094714.jpg

IMG_20240127_101523.jpg

Till we meet again... 83,500 ๐Ÿ› ๏ธ

๐Ÿš™๐Ÿ’จ

  • Like 3
Posted

#megga cheapskate 'Bruccie Bonus'!

PTFE wrapped onto drain plug ๐Ÿ‘๐Ÿ˜‰

๐Ÿš™๐Ÿ’จ

  • Like 1
Posted

Frankly, I'm getting peed off with my *lack of success, getting the oil into the drip tray ๐Ÿ˜•

The search is on.... for an abandoned AdBlu container = tall (relative to screw cap/lying on its side), quite square profile and easily carved into shape.

No Spendy Here ๐Ÿ˜‰๐Ÿ‘

๐Ÿš™๐Ÿ’จ

IMG_20240129_103625.jpg

  • Like 2
Posted

Ooof..... ๐Ÿ™€

ย 

IMG_20240130_113058.jpg

..... I suspect I slightly 'overpaid' ๐Ÿคฃ๐Ÿคฃ

๐Ÿš™๐Ÿ’จ

  • Like 2
Posted
On 29/01/2024 at 10:33, tooSavvy said:

Frankly, I'm getting peed off with my *lack of success, getting the oil into the drip tray ๐Ÿ˜•

The search is on.... for an abandoned AdBlu container = tall (relative to screw cap/lying on its side), quite square profile and easily carved into shape.

No Spendy Here ๐Ÿ˜‰๐Ÿ‘

๐Ÿš™๐Ÿ’จ

IMG_20240129_103625.jpg

I have one, let me know if you want it and you can collect any time you're passingย 

Posted

Some sort of 'milestone'....

ย 

ย 

๐Ÿš™๐Ÿ’จ

IMG_20240130_164506.jpg

  • Like 3
Posted

Having gone 12,000 miles on my tyres, I think I'll swap F to B.

I have a long handbrake (should self adj) so plan is:-

All nuts cracked off.

Rear up onto axle stands/drums off/adjust for wear.

Lift front, one side, on TJ, remove wheel and swap to back. Repeat.

Should get 2.4.1 ๐Ÿ‘๐Ÿ› ๏ธ

๐Ÿš™๐Ÿ’จ

ย 

  • Like 2
Posted

Made contact with @loserone.

Dropping by, with SWMBO, for an AdBlue container + *chat.

*Well, if he has the Babelfish....

๐Ÿš™๐Ÿ’จ

Posted

Mr and Mrs Savvy came for a cup of tea and a chat and went away with an empty bottle.ย  Trust you got home safe, the snow has stopped again now

Posted

Yes, great visit.... Anyone who lives in a place, with a lounge big enough the build the Colditz Glider, gets all my admiration.

Took a shoot thru, from yours.... To Alston. Across and a hard right (scenic route) down to Haltwhistle. Took the back road out of Hw >> straight up to the Military Rd.

Great day, SWMBO is looking forward to the first lambs.....

A true pleasure MonAmi

๐Ÿš™๐Ÿ’จ

  • Like 2
  • Thanks 1
Posted
10 minutes ago, tooSavvy said:

SWMBO is looking forward to the first lambs.....

We've been wondering about getting an orphaned one this spring.ย  ย We'll see!

  • Like 2
  • Agree 1
Posted
35 minutes ago, yes oui si said:

Bagsy naming rights

Too[Savvy] L8M8.... Obvz "MaxiD" ๐Ÿ˜

๐Ÿš™๐Ÿ’จ

  • Like 1
Posted

I have been experiencing that 'mild judder', when tailing off the gas in 5th to see the road is clear and then squeezing the gas on again - with no massive drop in speed!

I'm aware of labouring in a high gear but this is unpredictable/most times but a new thing.... Since I bought it....

I'm plumping for 18yr old 'cooked' leads ๐Ÿค”

Plugs were new 1st service I bought it ๐Ÿ‘

IMG_20240212_161013.jpg

๐Ÿš™๐Ÿ’จ

  • Like 2
Posted

#๐Ÿคฌ#๐Ÿคฌ#๐Ÿคฌ..๐Ÿ™€๐Ÿ”ฅ๐Ÿ™€.....

W.. T.. actual.. F!..

My driver's side front caliper started smoking just earlier this afternoon ๐Ÿ˜ฏ๐Ÿ™„

..... Am I Cursed ๐Ÿ˜ตโ€๐Ÿ’ซ

Well, f#ck it.... I'm getting the 'oily spanner' onto this >>> part ordered ๐Ÿ› ๏ธ๐Ÿ˜Ž

ย 

IMG_20240213_154938.jpg

He can swap the wheels round & pull up the handbrake while he's at it...

๐Ÿš™๐Ÿ’จ

  • Sad 2
Posted

Booked in..... Get it round the corner @07:30 Saturday...

He will hit the rear first and assess wearing in the shoes/order parts.

๐Ÿ› ๏ธ๐Ÿ˜‰ ... ๐Ÿ˜Ž

๐Ÿš™๐Ÿ’จ

  • Like 2
Posted

You may recall I bemoaned the lack of a Temp gauge = Idiot Light ๐Ÿ˜•

Idly riffling through images/eBay sales of 'my' engine, I was heartened to discover images of the heater stubs >> with the little 'bleed off' stubs to loop around the TB. These pipes are always HOT, even with the heater flaps closed off.....

I am setting out to get the 'sensor bulb' wrapped onto that little stub, then wired through the bulkhead to the digital display.

..... More 2 follow ๐Ÿ˜Ž

ย 

IMG_20240215_094232.jpg

๐Ÿš™๐Ÿ’จ

IMG_20230926_100442.jpg

Posted

My eBay caliper is 'incoming @13:00' ๐Ÿ˜

Big relief, I'll inform the garage ๐Ÿ‘

๐Ÿš™๐Ÿ’จ

  • Like 2
Posted

Ahh..... 'Full House' = c/w mount & oil soaked pads!! ๐Ÿ˜ฏ

ย 

IMG_20240216_145847.jpg

Bit of wire brush action + solvent...

Clean out bleed nipple & rubber lube the sliders (no nicks, good condition...)

ย 

IMG_20240216_161847.jpg

IMG_20240216_161924.jpg

Informed my oily spanner ๐Ÿ˜‰

๐Ÿš™๐Ÿ’จ

  • Like 3
Posted

Just having a coffee @07:10 โ˜•

Two minutes drive - Five minutes chat - Four minutes walk home ๐Ÿ˜Ž....

See what the ยฃbill is, eh ๐Ÿ™„

๐Ÿš™๐Ÿ’จ

  • Like 2
Posted

..... And home again! Kettles still hot โ˜•๐Ÿ‘

๐Ÿš™๐Ÿ’จ

  • Like 3
Posted

All Sorted! Deffo seized caliper โœ”๏ธ

2.5h @ยฃ40 cash = yes, he's getting ALL my work ๐Ÿ˜

๐Ÿš™๐Ÿ’จ

  • Like 3
Posted

Having *saved a couple of quid this morning...

I'm tempted to splash out on a Starter ๐Ÿ˜ฏ

It spins fine, cranks up in 2secs BUT goes "skagarrkahhahha" for a second after firing up.... Always, every time I start up ๐Ÿคจ

It's the solenoid pull in type so I'm unsure whether it's worth effing about [up ramp, take off, stare at it, put it back on, off ramp] OR do the whole thing + replace ๐Ÿค”

I'm currently weighing up eBay smokers....

๐Ÿš™๐Ÿ’จ

  • Like 1
Posted
On 29/01/2024 at 10:33, tooSavvy said:

Frankly, I'm getting peed off with my *lack of success, getting the oil into the drip tray ๐Ÿ˜•

The search is on.... for an abandoned AdBlu container = tall (relative to screw cap/lying on its side), quite square profile and easily carved into shape.

No Spendy Here ๐Ÿ˜‰๐Ÿ‘

๐Ÿš™๐Ÿ’จ

IMG_20240129_103625.jpg

Saw one of those abandoned the other day locally. Try your nearest main road esso/BP, by the car wash or tyre pump, always loads dumped at our big esso on a main road ๐Ÿ‘Œ

I need a new oil can, I've lost both stoppers for it and did kick it over during winter and got oil fucking everywhere in the garden, it's still a bit lethal to walk down the path now but no ones slipped yet ๐ŸคžIt also seems I did a stupid and emptied it into my 1l of oil sitting in the bottle rather than the empty bottle I'd saved for the job, so have no top up oil currently. Good job it doesn't use any

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...