tooSavvy Posted September 12 Posted September 12 @meowmeow.. Bloody Aced it M9 🎯 *credit respect from an inveterate Scrappy Scrounger = IMP re builder 😉 Oooff ♥️ 🚙💨
Somerset Suffolk Posted September 12 Posted September 12 2 hours ago, meowmeow said: Also - drove to Dover to collect the washing machine (whole point of buying this car), chucked it in the boot and it looked tiny - so much so I think it might've fitted in the Golf anyway... Oooh twin tub ! remember ours lived under the breakfast table and would then be dragged out and put by the kitchen sink ! on the spin cycle it could cover ground pretty quickly and was quite scary ... when you were 4 years old - for some strange reason, after it was replaced with a modern front loader, dad kept it in the seller for years ! was still there when they moved in 1992 - happy memories ! Rustybullethole and meowmeow 2
meowmeow Posted September 12 Author Posted September 12 1 hour ago, Somerset Suffolk said: on the spin cycle it could cover ground pretty quickly and was quite scary ... when you were 4 years old - for some strange reason yeah i'm shoving it in that corner in the hopes it won't try to go anywhere - just got to sort the water supply so i don't have to move it to the sink every time i want to use it Somerset Suffolk 1
High Jetter Posted September 12 Posted September 12 1 hour ago, meowmeow said: yeah i'm shoving it in that corner in the hopes it won't try to go anywhere - just got to sort the water supply so i don't have to move it to the sink every time i want to use it Can I ask why? Very inefficient compared to a modern machine.
meowmeow Posted September 12 Author Posted September 12 9 minutes ago, High Jetter said: Can I ask why? Very inefficient compared to a modern machine. few reasons: 1) the flat is very small with not great airflow, and the spin dry speed of the twin tub is much faster (max 3000rpm) than that of a front-loading machine, so less drying when hanging up (in theory) 2) much lighter to carry up the stairs as no concrete block inside 3) i hate buying things that i can't figure out how to repair myself 4) also it was very cheap Shite Ron, Rustybullethole, adw1977 and 4 others 7
High Jetter Posted September 12 Posted September 12 38 minutes ago, meowmeow said: few reasons: 1) the flat is very small with not great airflow, and the spin dry speed of the twin tub is much faster (max 3000rpm) than that of a front-loading machine, so less drying when hanging up (in theory) 2) much lighter to carry up the stairs as no concrete block inside 3) i hate buying things that i can't figure out how to repair myself 4) also it was very cheap Valid. Yes, spin speed 2 to 3x higher than a FL. Much higher water consumption though. Respect for re-using & improving.
Bmwdumptruck Posted September 13 Posted September 13 9 hours ago, High Jetter said: Valid. Yes, spin speed 2 to 3x higher than a FL. Much higher water consumption though. Respect for re-using & improving. Very very labour intensive too. I can remember my mum basically having a whole day every week doing the washing when we were kids. It was quite a chore. When mum n dad divorced an automatic was the first thing she bought herself. High Jetter 1
Missy Charm Posted September 13 Posted September 13 6 hours ago, Bmwdumptruck said: Very very labour intensive too. I can remember my mum basically having a whole day every week doing the washing when we were kids. It was quite a chore. When mum n dad divorced an automatic was the first thing she bought herself. Indeed. I've never used a twin tub, but did have to use our automatic 'as' a twin tub when something went wrong with it -- had to unload mid-cycle into a bowl, manually drain, re-load and then use the computer override to force a spin -- machine is pushing thirty but was top-of-the-range for its time! Wet clothes are bleeding heavy. Wet towels, as in utterly saturated items, even more so. @meowmeow: was traditional to perform the twin tub transfer process with wooden tongs. My grandfather used to do it. Parents never had to as were launderette users until they got a proper automatic back in the eighties; father's mother was truly poor so washing day consisted of tub, mangle and twenty Woodbines. All the best . Somerset Suffolk 1
jim89 Posted September 13 Posted September 13 11 minutes ago, Missy Charm said: Indeed. I've never used a twin tub, but did have to use our automatic 'as' a twin tub when something went wrong with it -- had to unload mid-cycle into a bowl, manually drain, re-load and then use the computer override to force a spin -- machine is pushing thirty but was top-of-the-range for its time! Wet clothes are bleeding heavy. Wet towels, as in utterly saturated items, even more so. @meowmeow: was traditional to perform the twin tub transfer process with wooden tongs. My grandfather used to do it. Parents never had to as were launderette users until they got a proper automatic back in the eighties; father's mother was truly poor so washing day consisted of tub, mangle and twenty Woodbines. All the best . Don't forget the dolly ! Missy Charm 1
Dan302 Posted September 13 Posted September 13 11 minutes ago, Missy Charm said: father's mother was truly poor so washing day consisted of tub, mangle and twenty Woodbines. All the best . I think it would be cheaper to buy a washer than 20 cigarettes nowadays! tooSavvy, Bmwdumptruck and Missy Charm 2 1
meowmeow Posted September 13 Author Posted September 13 16 hours ago, High Jetter said: Much higher water consumption though 6 hours ago, Bmwdumptruck said: Very very labour intensive too. These two issues should hopefully be offset somewhat by the fact that I'm not on a water meter, and i don't have many clothes... 31 minutes ago, Missy Charm said: @meowmeow: was traditional to perform the twin tub transfer process with wooden tongs. My grandfather used to do it. Yep, i have the tongs somewhere though they're a bit flimsy so may need repairs Somerset Suffolk and Missy Charm 2
Somerset Suffolk Posted September 13 Posted September 13 https://www.facebook.com/reel/1692381435223119 bloody hell I've been down a massive twin tub rabbit hole ! sounds like an English Electric Lightening on start up High Jetter 1
Somerset Suffolk Posted September 14 Posted September 14 @Missy Charm These live under the sink in my utility room/workshop .... Missy Charm 1
NorfolkNWeigh Posted September 14 Posted September 14 Nobody has mentioned the threat that the spin dryer would “rip your arm right off” if you went near it before it had stopped . A threat to my life as real as quicksand and a scorpion sting when I was a kid in the Black Country, in the 60’s. Dan302 1
Bmwdumptruck Posted September 14 Posted September 14 22 hours ago, meowmeow said: These two issues should hopefully be offset somewhat by the fact that I'm not on a water meter, and i don't have many clothes... If you’re on your own and paying full water rates you are seriously overpaying. Even with a family of four we were literally saving 50% on normal water rates with a meter. Now there’s just two of us it’s even cheaper. Carl1981 1
Bmwdumptruck Posted September 14 Posted September 14 4 hours ago, Somerset Suffolk said: @Missy Charm These live under the sink in my utility room/workshop .... Exactly the same tongs mum had and that machine looks identical to ours….😂 jim89 1
jim89 Posted September 14 Posted September 14 15 hours ago, Somerset Suffolk said: https://www.facebook.com/reel/1692381435223119 bloody hell I've been down a massive twin tub rabbit hole ! sounds like an English Electric Lightening on start up 😂 That's posh me & me mam used to pour washing up bowls of clean water in for the rinses Imagine the elfin safty flap about that door with no interlock ⚡⚡⚡😂
Bmwdumptruck Posted September 14 Posted September 14 1 minute ago, jim89 said: 😂 That's posh me & me mam used to pour washing up bowls of clean water in for the rinses Imagine the elfin safty flap about that door with no interlock ⚡⚡⚡😂 My Nan had separate tub machines, a washer and a spinner. The washer had a mangle attachment too. Just right for little boys fingers…. But I seem to recall the spinner had a lid that operated the switch, so to stop it you had to open the lid, leaving it to slow from full spin speed with the lid open. Get that past H+S nowadays!! jim89 1
jim89 Posted September 14 Posted September 14 46 minutes ago, Bmwdumptruck said: My Nan had separate tub machines, a washer and a spinner. The washer had a mangle attachment too. Just right for little boys fingers…. But I seem to recall the spinner had a lid that operated the switch, so to stop it you had to open the lid, leaving it to slow from full spin speed with the lid open. Get that past H+S nowadays!! Aye I remember the little spin thing with a water spout just high enough to get a washing up bowl under it😂 if you just threw things in it would often do a dance around sloshing slippy suds water all over.... But only the once mind 🤬😂 That FB clip had similar but built in with a tap to supply fresh water ❗😯😯 We had a tumble dryer from when I was a little kid until my mam moved out after my dad passed a few years ago.. we had to get it out & away, but it still worked & was used occasionally still.... Don't think it ever got repaired... 😯 Imagine that genZ .... 🙄 Somerset Suffolk 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now