Project Domes shonky autos - Car that lived by the sea in Scotland in rust shocker*

[GingerNuttz]

Tis very white 😂

The gaffer approves 

Little but of urethane wave but it'll block out before it's buffed. 

[hairnet]

skillz (from nuttz obvs)

joke dome

 

[GingerNuttz]

Front valance was done before I was put in hospital but I never posted a pic.

Just the black lip around the spoiler to do so hopfully that'll be done this weekend.

[GingerNuttz]

Been polishing some stuff on the days I can get up.

Will update this with more of the shell later this week.

 

[dome]

Ok, time for a fairly boring update as not a lot has been happening.

Kangoo

Not a lot going on here. I bought a new wing from the scrappy to replace the drivers side, the passenger side was done last year. It's with @GingerNuttz just now and I'll get it fitted when it comes back. 

Jeep

Speaking of our favourite tame welder, he got delivered the Kangoo wing in the back of the Jeep which is still with him. Why?

Well, it got advisories for rust on the sills last year but I chose to ignore them. The MOT ran out about a month ago so I set about prodding to see what I could find. 

It's got rock sliders fitted from the factory and these were rusty, I thought (hoped) that the tester had meant these. I started on the driver's side and cleaned it up. 

 

Found a hole

Cut it out 

Made a repair patch

I'll spare you the pictures of my welding as I'm still shite at it but here it is with some paint on it 🫣

I chose to ignore the sills in this side but couldn't do the same on the other side sadly😳

Sill end with foam in it. 

Looking up from underneath.

Aye, that's fucked.

I did the right thing and ignored it for a bit.

I did buy a new bonnet for it as the original one had been painted by Stevie wonder.

Going full Roadkill with the bonnet off.

And the new one fitted.

@GingerNuttz has cut all the old rust out. I posted this pic on the FB group and it would appear that foam is from the factory. Thanks Jeep!

911

It's not been far since the weather turned.

One mod I'd wanted to do was to the drivers seat. The seats in mine were pretty basic and not very comfy. There's loads of aftermarket or genuine Porsche options but they're all spendy. 

I have a pair of bucket seats for the Manta though and for £100 purchased a mount for the 911.

So, seat out.

Much measuring and trial fitting and the bucket was on the side mounts

And installed.

What a difference it makes! I'm actually in the car now and not sitting on it. Best £100 I've spent on it👍

I spent a couple of weekends emptying my lockup of Manta and MX5 bits and transferring them to my garage/shed and yesterday tucked the Porsche up for the winter. 

Tyres up to their maximum pressure and sitting on carpet, tank filled and battery will be coming to the house to get conditioned. There's plenty of ideas on how to store a car but that's what I'm going with.

It'll be back in spring for some more miles and hopefully some paintwork too. 

One thing of note when clearing the lockup out 

One of these wiring looms is from my 1981 Manta, the other from a 2008 MX5.  

Progress*

 

 

[Tayne]

29 minutes ago, dome said:

 

And installed.

What a difference it makes! I'm actually in the car now and not sitting on it. Best £100 I've spent on it👍

 

 

 

Back in the day, you could option your 356 or early 911 with a sports seat for the driver and standard seat for the passenger.

[dome]

Well, that escalated quickly on the Heep

At least @GingerNuttzwill be able to enjoy his Carribbean holiday when I've paid for the welding 🫣

[dome]

The Heep did live by the sea in Kirkcaldy for 10 years so it shouldn't come as a surprise I guess.

Here's the Kangoo as a contrast.

The shell must be on about 170k miles but it lived in the midlands til I got it on the road up here 4 years ago. It's getting a clean up and some fettling to try and keep it good. 

That strut was a genuine Renault one and brand new when I got the van👀