Jump to content

Cheap fault code reader that works on E46


Recommended Posts

Posted

Any suggestions for a cheap fault code reader that can read and clear does on an E46. I have an oxygen sensor code that will need clearing after I swap it out so decide I may as well join the 21st century and buy a cheap reader.

Posted
  On 28/07/2017 at 14:15, cpjitservices said:

I've used this on a BMW before. Think it was a 318i.

 

I didnt pay that much for mine, I think it was about £25 quid.

 

I've used it on many other cars too.

 

http://www.ebay.co.uk/itm/U581-Diagnostic-Car-Scanner-CAN-OBD2-EOBD-Scan-Tool-Engine-Fault-Code-Reader-/232344876039?hash=item3618d57407

Thanks, I have found one for £29 but it doesn't list BMW specifically. Did it reset the codes OK when you used it?
Posted
  On 28/07/2017 at 14:41, Tamworthbay said:

Thanks, I have found one for £29 but it doesn't list BMW specifically. Did it reset the codes OK when you used it?

Yes. Have used it on many cars.

  • Like 1
Posted

This Elm327 one can be used on pretty much any car with an OBD port:

 

http://www.ebay.co.uk/itm/ELM327-WiFi-OBD2-Car-Diagnostics-Scanner-Code-Reader-for-iPhone-iOS-AND-Android-/251760321498?epid=814600008&hash=item3a9e15a3da:g:fXsAAOSw2XFUkX3U

 

You need a smartphone or tablet. If you have an iPad use wifi or Android use Bluetooth. Torque Pro App for Android is one of the best for most diagnostics.

 

 

Squirrel2

Posted
  On 28/07/2017 at 15:20, SiC said:

I personally rate the DS150e for general diagnostics.

Me too, best bit of kit ever. Mine was stolen unfortunately. Still got Delphi Cars in my laptop for when/if I replace the DS150e. You can do a lot more with it than just general diags too.

Posted

Creator c310+ on Amazon. Best £40 you can spend on a post 97 BMW

  • Like 3
Posted
  On 28/07/2017 at 18:16, Tayne said:
Thanks for all the replies everyone, at less than £20 it's a no brainer. Only need it to reset the eml light once the lambda sensors are swapped out but I dare say it will come in handy.
Posted

The £17 reader as suggested by Tayne arrived this morning. I turned it on and plugged it in, got the engine running (as we did when I borrowed my mates posh one) and got an error saying it couldn't connect. Tried again, nothing. Then tried with the ignition on but the engine not running and bingo! Two minutes later faults were read (the lambda again in one of its off moments) and deleted. EML is now off again and I am a happy man. Thanks Tayne (and everyone else who offered suggestions).

  • Like 2
Posted
  On 02/08/2017 at 11:43, Tamworthbay said:

The £17 reader as suggested by Tayne arrived this morning. I turned it on and plugged it in, got the engine running (as we did when I borrowed my mates posh one) and got an error saying it couldn't connect. Tried again, nothing. Then tried with the ignition on but the engine not running and bingo! Two minutes later faults were read (the lambda again in one of its off moments) and deleted. EML is now off again and I am a happy man. Thanks Tayne (and everyone else who offered suggestions).

Same interface as mine that one.

 

Different shell.

Posted
  On 02/08/2017 at 11:46, cpjitservices said:

Same interface as mine that one.

 

Different shell.

I bet there are a load of different types depending on which Chinese factory they come from. I found a manual online in reasonable English, but to be honest I found that after I had used it and it's so simple that I don't think you really need any instructions. It's limited in what it will do but I am not complaining, it's brilliant for the money. I have needed to dip my toe into fault reader for ages but never had the reason to dive in before.
Posted

I have never read the instructions.

 

Best use of mine was finding a secondary air injection pump failure in a £5k Mercedes a friend was looking at buying.

Swift googlage in the showroom found a £1100 price tag on the air pump.

Needless to say, he did not buy that car.

  • Like 2
Posted
  On 02/08/2017 at 11:57, Tamworthbay said:

I bet there are a load of different types depending on which Chinese factory they come from. I found a manual online in reasonable English, but to be honest I found that after I had used it and it's so simple that I don't think you really need any instructions. It's limited in what it will do but I am not complaining, it's brilliant for the money. I have needed to dip my toe into fault reader for ages but never had the reason to dive in before.

Yeah your probs correct, I got the one I have because I saw a garage using it. Its ok buying these Bluetooth ones and using your phone but sometimes I cant be arsed, easier to plug in the reader direct and sort the codes that way. It is very easy to use. I keep mine in the glove box in the car its its box.

 

Not as nice as my DS150e Delphi kit like, could do everything with that at dealership level, even programmed keys with it once.

Posted

They all seem to have to come down in price massively, I guess the technology has been around a while now. I was impressed that my cheap one gave the actual fault and not just a DTC that I had to translate.

Posted
  On 02/08/2017 at 12:29, cpjitservices said:

Don't forget these are still knockoffs. Genuine DS150e are £1.5k plus. I reckon autocom (who make the ds150 and Delphi rebrand) are really missing a trick by not doing a legit version for enthusiasts but a lot cheaper but having it limited. I.e. can only 2 different models per week max.

  • 2 years later...
Posted

I maybe should have started a new thread on the ask a shiter page? I’m not even sure this is what I need! Any help appreciated :) 

Posted

I got a cheap eBay one and have now used it on half a dozen cars. It has worked on everything reading wise but would not turn off an airbag light on a Mazda despite the fault being corrected. For about £15-20 it has more than paid for itself.

Posted
  On 01/02/2020 at 11:37, aldo135 said:

Looking for similar advice, got a 2010 Hyundai and 2002 Saab, both with ABS lights on and would like a cheap code reader. Seen this at ECP, any good?

https://www.eurocarparts.com/p/streetwize-obdii-fault-code-reader-lcd-screen-548775301

Mainly as there’s one walking distance from my house and I’m like a child, I want one NOW ?

Expand  

I suspect this won't work for what you want to do. I have a similar cheapo one (from ebay similar to those at the top of the thread) and the vast majority of the cheaper ones only do powertrain ('P'-codes) as they are pretty generic as they are supposed to comply with OBD2 spec which concerns powertrain/engine codes only. All other codes relating to body, brakes etc can be more bespoke to a manufacturer or group so ABS faults in your case are unlikely to be covered by one of the cheap FCR's. 

 

Oddly, I was going to start a thread regarding recommendations of FCR's that do a wider variation of codes that hopefully would solve many of our issues with respect issues such as ABS, Airbags, transmissions etc.. I'm thinking of getting a better one (Alfa on the horizon.......) myself in the near future. 

 

I've heard good things about Foxwell products but haven't used any, it's just what I've read. 

Posted

I recently bought a 'topdon elite' for about £70 as I needed to investigate/clear an airbag light on the wife's C1. It was the cheapest one I could find capable of reading ABS/SRS across a range of vehicles and had loads of good reviews so I begrudgingly went for it.

Interestingly it actually picked up a code for a cylinder 1  missfire on the V70 that none of my cheaper scanners had found, also the live data showing exactly what 02 sensors etc are doing is great for more fine tuned diagnostic work. 

 

Posted

If ( and it would never happen ) I owned an E46 I’d invest in some good quality diagnostic gear - you are gonna need it ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...