Toyota alloys swap for steels

[bigroverfan]

Not been on here for ages, my girlfriend is scrapping her corolla very soon and it has a decent set of alloys on it with good 195-50-15 tyres on. If anyone near St. Helens merseyside wants to come and take them off and swap for steels in any old shagged condition, and make a small contribution towards Xmas beer money you are more than welcome.

Let me know, it's a shame for the scrap man to get them!

[Cavcraft]

What fitment are they please?

[hairnet]

b theyre all 4x100 54 cb and 45 offset

 

unless its 07 on and theyre 5 bolt and you wouldnt be scrapping one of those......

 

id be all over those but the bore is too small

[skattrd]

Model      

Toyota Corolla

  PCD

4 x 100

  ET

35...38

  C.B.

54

 

4x100 so like lots of wheels, but smaller centre than most, so prob Toyota only.

 

Edit, beaten to it by hairnet, but on the plus side loads of other wheels would fit on the Corolla

[bigroverfan]

Not sure on the pcd.

They are on a 97 corolla and were on a mk1 mr2 before. 4 stud

[bigroverfan]

They are aftermarket alloys, if anyone wants picks I'll try and email one to you.

[cobblers]

If they are aftermarket then they will almost certainly have spigot rings that you can bray out allowing them to be fitted to any old 4x100 chod

[DodgyBastard]

If they are aftermarket they will probably look like shite!

[bigroverfan]

Could someone put a pic on for me if I email it to them?

[KruJoe]

Click [more reply options] below, then just attach the pic (as you would to an email) then [add to post], and it'll show up here.

[DodgyBastard]

I'm picturing something like this!