Jump to content

Bangernomics Escape to the Shat-ohh, brownmotion and other suppositories now with added time wasting/house ruining.


Recommended Posts

Posted

I’m using a track saw but per my usual MO the track is a bit short. Need another set when I go to screwfix again in september.

It isn’t so bad just a pfaff moving it about twice for one cut.

Nearly there just another two skirt board cuts then onto the uprights. Will be decorated this weekend with a good wind. Then an “easy” week for the floor and trimming up the cabinet.

680b54c1189b63e093db42edeb44c6e8.jpg
ab1056a46d82faed4fb878bcaa30dfc4.jpg
4da7d2d69aa55cd7e3f6780999587cdb.jpg
5eb8adbac08b797e030a2018d31f07de.jpg

Posted

May actually do some car based stuff this year other than basic service and CT not that I am complaining.

Posted

More slicing and gluing later.

a3325ff6766d8a76208de198f145d4cf.jpg
974e60c06c57bece9be4c70581161485.jpg

On schedule for paint to start tomorrow.

  • Like 2
Posted

She’s started the daubing stage. 75252ee9d4a8af791d21034c976ec167.jpg

Shite shelf made from some leftover t&g chipboard flooring.


1c6a3f60f540fde2e4867d214c3deeef.jpg

Need to figure out a home steaming method for the trim. To get round this corner, a pan and a lid should do it?

e2732471d7766dc6e677257e18fee36c.jpg


9698989c00d55485cbfb1a4191571f46.jpg

Posted

Well that was much easier than expected.

c70177df9e4dd31a4d520f114a88b628.jpg
5b70efb024db25869a967cc79b767750.jpg
0c81b512a5886b0ac8bbe6b5959e2889.jpg

Posted

Getting there now.

7d995ee12c0c3780baa2157e807c76ea.jpg

Quality cupboard is back together.

da9dd2a3d7068a0f2d44cc030060773b.jpg

Need to figure out what to do with the beam, cream paint and wax is the plan. Personally I would just wallop it white and move on.

981606458897c3ca4521da8d51ae58ae.jpg

Paper and then flooring to finish.

Posted

Mrs B started papering today and then I got roped in. She did a good job all the same even with my help.

10fe1707f370e2556f7085ba12f495dc.jpg

a9c37b309950245d0017fa35f1751a49.jpg

cd0c61bdd7a4f38d47a3b7df5946bd60.jpg

Start

9d45c10639f33df12e14868a67e7c3df.jpg

During

720470cdfbd5b5940e3a9746b7ee7993.jpg

Almost there

c84300b34e847c9d91e7a595c12326ff.jpg

Flooring starts tomorrow. After this I am going cyclemotor shopping

Posted

Got your bed sorted thi?🤣

Posted

Im guessing that shark has almost no suction left now after being used for a house reno? 😂

Posted
Im guessing that shark has almost no suction left now after being used for a house reno?

Funny enough it is excellent still after a few years. 3 sets of filters that we wash after each use and replace every couple of years seems to work well. It is about 5/6 years old now although yes I think they suck all the shite through the motor given half a chance so miracle.

The bolloxed french supermarket own brand thing is totally asthmatic after living on the end of a chopsaw though.
Posted

Had CBA after a tough work week so got not far with the floor. Tomorrow is another day.

b92426b3d16e13752861cda133baefae.jpg


5566aec9afd2fae175af5aae1939f654.jpg
I need some kneepads.

Posted

Floor in. I’ll make some skirts and trim up tomorrow. Just a piece of wood for the curtain rail, two sockets to replace and I am out of there ready for Mrs B to fill it full of things.

a91ea43cea54336025f6061cbf4b7129.jpg
cdd0492e54001b710c84ba7153135de4.jpg

  • 3 weeks later...
Posted

Went to the mower racing today. Spotted a few bits of quality. 25e9dc6047173b1a75b40f93d4b27714.jpg
577a19221f5edea180cf0b8c97d5b76e.jpg
926ce6597d54a2d4ed5e760484f61c86.jpg
45986c68782905da83c70e5bfa0e8436.jpg
43d858e384630b4f559ada1ec7ab74fb.jpg
a9becdae5d7e7cdfb66c7f485ecdfef9.jpg
06445a3379fcb17ce1ca486e85d62ec1.jpg

122530e2cb7781a3c847e266b9f5a4bf.jpg

  • Like 2
Posted
4 hours ago, bangernomics said:

Went to the mower racing today.

Is it better for grass to be cut quickly? :)

  • Like 1
  • 2 weeks later...
Posted

Dullest failure ever? Washer pump not producing much more than a piddly dribble. Makes the same noise though?

Pulled it apart and it has one motor and some witchcraft that feeds both outlets? Maybe theres a pair of earths and the gubbins moves left or right?

I pulled it apart in the most awkward way as these things are not designed to be fixed and it has a plunger with two bits of rubber one on each end which if it moves would shut off the outlets. Maybe a magnet polarised by the earths?

Anyway it didn’t work so temu to the rescue and 3 or so days later…. New one landed this morning so will throw it on and dissect the old one further.

Pics of not so interesting stuff to follow.

Posted
19 minutes ago, bangernomics said:

Dullest failure ever? Washer pump not producing much more than a piddly dribble. Makes the same noise though?

Pulled it apart and it has one motor and some witchcraft that feeds both outlets? Maybe theres a pair of earths and the gubbins moves left or right?

I pulled it apart in the most awkward way as these things are not designed to be fixed and it has a plunger with two bits of rubber one on each end which if it moves would shut off the outlets. Maybe a magnet polarised by the earths?

Anyway it didn’t work so temu to the rescue and 3 or so days later…. New one landed this morning so will throw it on and dissect the old one further.

Pics of not so interesting stuff to follow.

The power and earth are reversed depending on which function is selected on the switch. When the motor rotates one way water is sprayed over the front screen, when it turns the other way, over the rear.

  • Like 2
  • Agree 1
Posted

1e32b5e592b8d4b21029a850fb25b38e.jpg

Washy wipey worky.

  • Like 1
  • Haha 1
  • 5 weeks later...
Posted

Pumpy stopped pumping again. Luckily it has bounced down the last couple of days so need to order a better one rather than the chinesium one that landed last.

  • 3 weeks later...
Posted

Leaf tyre shocker or boring update alert.

Apparently this bastard caught a screw and got a slowie which is entirely the fault of [mention=32054]Benzyl[/mention]

820fe2e297163160e5c4e5d0dc2b966a.jpg

Looked at the pick he sent to me and said hmm that looks a bit split too.

23aa1a05f86bdaf7b37e04fb4119bccd.jpg

Zooming in oh dear it really is. Pair ordered for fitting on Tuesday. Fought the urge to fit £50 deathrings and went for £100 deathrings instead.

2f0170b0b8f01ee98571b0b82f4b71a8.jpg

Posted

In other news decided we need to add some airflow into the old place. Only issue is the walls are about 750/800mm thick.

c59c3b02beac0362e1a3b4de975df9e0.jpg
e408fae9a65badd1e1dc665802c0c199.jpg
08a1e917332c789c24465d585aeeb335.jpg
09278807e4c9a5d16b20e4fd3133d386.jpg
9211c93a1f6d8b729076d41d2ea6159e.jpg
0a2edaa4022a6f3b027a2404bd07e588.jpg

49cac971ae7a2611694fc7ad6f4f6ff1.jpg


Off to the brico for a mouseproof vent.

  • 1 month later...
Posted

Tedium anyone

7e144dd4d7e169df844b6f89d2fa13eb.jpg
d987d088eebeb6376155dae7e90c693a.jpg

Posted

c86fcfca7d138ae90098d88b30839812.jpg

Posted

4eb4616101cd89001723debefa729a9d.jpg

A nice clean pass.

Posted
6 hours ago, bangernomics said:

Tedium anyone

'Thee, God, we praise'. (Te deum, latin)

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...