Jump to content

eBay tat volume 3.

Ross_K

By Ross_K
in AutoShite

 Share

Recommended Posts

MarvinsMom Rank: Talbot Matra Rancho

MarvinsMom

Posted
Posted

wow that taxi is lush.....

 

and been prepared to take on an SVX would require balls so steel.

 

i would, if i was brave enough....

doug Rank: Citroen Ami

doug

Posted
Posted
  • Reason(s) for failure

    Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s rear subframe/axle mounting (6.1.B.2)
    Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s rear subframe /axle mounting corroded (6.1.B.2)
    Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s front inner wing behind headlight (6.1.B.2)
    Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s front inner wing behind headlight corroded (6.1.B.2)
    Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s front under inner wing corroded (6.1.B.2)
    Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s front under inner wing corroded (6.1.B.2)
    Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s rear shocker mounting corroded (6.1.B.2)
    Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s rear shocker mounting corroded (6.1.B.2)
    Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s rear inner wing corroded (6.1.B.2)
    Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s rear inner wing corroded (6.1.B.2)
    nearside rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
    offside rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
     
     
    Its fucked.
phil_lihp Rank: Lancia Gamma

phil_lihp

Posted
Posted

This was for sale for ages locally to me a few months back, it was parked at the side of a busy road in town for weeks with a sign in the window and had lost its wing mirror as a result.  I was pleased to see a young lad driving it about shortly after it disappeared and it looked very clean and shiny.  I'm guessing he's had enough of it now though as it's back.  Apart from the steering wheel he's clearly taken care of it, is it worth what he's asking?  I don't know.  Engine bay looks absolutely mint.

 

http://www.ebay.co.uk/itm/Austin-Maestro-1-3-/262104809017?hash=item3d06a9fe39:g:bHEAAOSw0HVWAajn

 

$_57.JPG

  • Junkman and Bucketeer
  • Like 2
Matt Rank: Renault 16

Matt

Posted
Posted

 

  • Reason(s) for failure

    Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s rear subframe/axle mounting (6.1.B.2)
    Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s rear subframe /axle mounting corroded (6.1.B.2)
    Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s front inner wing behind headlight (6.1.B.2)
    Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s front inner wing behind headlight corroded (6.1.B.2)
    Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s front under inner wing corroded (6.1.B.2)
    Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s front under inner wing corroded (6.1.B.2)
    Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s rear shocker mounting corroded (6.1.B.2)
    Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s rear shocker mounting corroded (6.1.B.2)
    Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s rear inner wing corroded (6.1.B.2)
    Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s rear inner wing corroded (6.1.B.2)
    nearside rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
    offside rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
     
     
    Its fucked.

 

 

Mercedes in rust problems shocker...

panhard65 Rank: Renault 16

panhard65

Posted
Posted

wow that taxi is lush.....

 

and been prepared to take on an SVX would require balls so steel.

 

i would, if i was brave enough....

Come on balls of steel aren't required just take a chance some of us are running Bentley's, Rolls Royce and Maserati's. I don't know that it is balls of steel you (I) need or sectioning for mental health issues.

  • Junkman and DVee8
  • Like 2
phil_lihp Rank: Lancia Gamma

phil_lihp

Posted
Posted

These things are a lot of pretty for not a lot of money, lovely colour too.  I realise it's not going to make the earth spin backwards with a 1.6 engine but nonetheless.  Shame they called it the Coupe here, in the US apparently it's called the Tiburon which sounds like something out of Star Wars.

 

http://www.ebay.co.uk/itm/2005-HYUNDAI-COUPE-1-6-S-Metallic-Blue-/151844310429?hash=item235aa04d9d:g:hVoAAOSwhcJWGN69

 

$_57.JPG

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...