Potential Sparkly stick waving help

[The Moog]

Is anyone localish to Accrington and fancies waving a sparkle stick at a Puma. 

 

Two of the bolts holding the drivers seat in have sheared and it is probably just as quick to weld the seat in. Literally a two minute job.  If I wasnt broke I would be buying myself a welder to do it. 

 

I am booked in to Knockhill on Sat so need it done by friday if possible. 

 

Happy to wave beer/pies/pictures of queen in face. 

[Tickman]

Can it be driven still?

I am happy to glue it back together up here! 

[DodgyBastard]

I can also do it up here if it can be driven. 2 mins from Knockhill.

[The Moog]

Might have to take you guys up on it, thanks for the offers.

 

I am going to try to drill through and then bolt a piece of flat bar underneath the car to spread the load. I will see how secure it is with that in.

 

Bit of a silly design as bolt goes through and is exposed underneath so gets all rusty.

[alf892]

Are the remains of the bolts sticking out under the car? If so get some good mole grips and wind them out....... downwards though

[The Moog]

Thanks for offers but managed to fix it.

 

One bolt was unscrewed with a screwfix left hand extractor

 

Other was drilled through then replaced with different bolt.

[gm]

Excellent, I could have also offered a bit of sparkly stick assistance on your way to the 'hill.