About two weeks ago this vehicle was inadvertently advertised by stinkwheel on here. Having recognised this vehicle from my time as moderator on the 2cvgb forum, and having seen it change hands then, I was interested.
 
A flurry of pm's saw a seed planted in my mind. We've got some building work to do at home - so what better way to help this than to buy a van that hadn't been on the road for 8 years?
 
Amazingly, my wife thought it a good idea too, and we discussed the proposition with our children. A family fun bus? Why not! My 5 year old son was keen, my 9 year old daughter much less so.
 
Anyway - wingz123 delivered the mucky beast to my drive this afternoon. Thank you very much sir, lovely to meet you!
 
So here we are, project acadiane after a quick jetwash.

 
Sent from my SGP621 using Tapatalk

What have I found?

Busy day at the SiC household. With the Rover gone, it was time to pick up it's replacement. Due to an insurance timing fuck up on my part, @N Dentressangle kindly delivered this for me. 

Just done four hours of driving going back and forth so I'm now a bit knackered. I'd usually sit in it and have a fiddle but I might end up falling asleep in there. 

Thought I'd start a thread about my old Capri since it's now reached it's turn in the que to receive a bit of attention.
 
I've actually had this since 2001, it's an early mk2, on an M reg 1974. Being an early car it's still got mk1 rear axle and single acting type rear brake set up aswell as a few other minor differences from later cars just to use up remaining mk1 parts.
It started life here in the Portsmouth area and doesn't seem to have ventured far since.
Originally a stardust silver 1.6 L poverty model, which means virtually sod all regarding luxuries. Basic 2 pod dash with black 'crackle' finish facia, no radio, no sun roof or vinyl roof, not even a centre console!
When I got to it unfortunately it had suffered severely from serious rust and latterly a vandal attack, having it's door and rear quarter panel booted in.
 
Over the next couple of years I got it sorted and a cheap re paint into roman bronze, which was a favourite colour of mine at the time. For the first year or two it seemed fine but since then things have deteriorated.
The respray wasn't good! It's thin in places and started to micro blister in various places, worst of which is all over the bonnet. The same bodyshop also did a bit of the bodywork I hadn't finished which was also pretty poor in some places.
It's always been a great driver and never struggles at mot time so I just kept on using it and doing nothing more than collecting parts now and again with a view to sort it one day.
It's also gained a few non original extras over the years like a higher spec wood effect 2 pod dash facia (which I like more than the original), a short console, brown interior instead of the utterly fucked black original, 'laser' 4 spoke alloys and a few other things.
 
Anyway, fast forward to last weekend, when I dusted it off after winter and noticed various areas of new rust coming through or older rust that's gotten worse. So the decision was made to go for a professional resto job now before I end up finding something else to distract me (like big american cars with knackered engines!).
 
1974 Ford Capri BBK244M by Dan Clark, on Flickr
Here it is as it currently stands. Looks ok from a distance but the reality is very rough around the edges and the paint is so bad in places it's becoming embarrassing!
IMG_0509 by Dan Clark, on Flickr
And the interior which I'll be re trimming into black leather at some point after the body works done.
 
It's been taken to the same place that did my Mercury's engine rebuild, since they did such a good job and they seem a good professional bunch.
I dropped it off Monday afternoon for a thorough check over to build up a list of work and get a rough quote.
Today I heard back from them.
Good news so far, I suppose. It is as solid where it counts as I thought it was. Chassis is fine, original strut tops fine, most of the back end is solid and just needs a few repairs here and there.
The worst is the bottom of the windscreen surround due to the wrong seal being used and then fitted badly causing leaks. Inner sill to A post bottom corner very scabby, front wings pretty crap, and various paint defects etc.
The engine is fine, compression all in tolerances. Suspension needs work, and some brake pipes are getting quite rusty. So far so good and no surprises!
There's still more checking to do over the next few days but it sounds alright so far.
This work should be made a bit easier by having a lot of panels and parts to fix things already. The big find being a new unused pair of front wings. Very hard to find mk2 items now, though I did have to pay for them!
 
 
The plan here is to make the car solid, reliable and good looking. I'm not making a show car or going too mad as that stuffs not my thing and if it was I'd start with a better more original car.
Some of the later add ons will be ditched like the mk3 boot spoiler that I hate! And return it to more standard looking mk2 as it should be. No go faster mods or anything like that.
The main priority is to get the body sorted and painted properly (engine out job and everything) then maybe a bit of mechanical work as needed.
The original idea was to re paint back into original stardust silver, but having thought about it I'm leaning more towards another favourite Ford colour of the era, Miami blue metallic, which is a lovely colour! Any opinions?
 
This will be another expensive project but not one I think I could do at home on the drive and do justice to, so I'd prefer to farm it out and get it right this time. It also means I can carry on working on my Transit and Granada at home without another distraction!
For anyone whose interested I'll try to update this now and then as things progress. I'll also try to get the old pics of the car from when I got it so you can see how rusty it was! Bear in mind though that I paid £100 for this car in 2001 with MOT and tax! Try doing that now.
I'm sure this is going to be worth the expense, not that I'm even considering selling it of course but I've had it so long I kind of feel obligated to do right by the car in a weird way!

Thought I should probably start a thread, given that a few people have suggested it. For my sins, my first car was a 1985 Hyundai Stellar. Bought back in 1997, when the sun still shone, I had more hair, and the world was generally a better place.
 
This may be the earliest photo I have, I think from 1998:
 

 
Anyway, I drove everywhere in it, and clocked up over 100k miles before I was given an Alfa Romeo 75. So I took the Stellar off the road for some much needed TLC. Made some progress on it - Rebuilt all the suspension, fitted a rebuilt Cortina* rear axle, Princess 4 pot front calipers and Capri vented discs etc - before a couple of house moves and renovations put it on the back burner.
 
* before anyone says they are identical underneath, there are some differences. I fitted a replacement axle fairly early on in my ownership, only to fit that not only was the propshaft flange the wrong size, the UJ was totally different so I couldn't even fit a new yoke. Finding a company on the day before New Year's Eve who could cut off the end, weld a new UJ on and balance it wasn't too easy, especially one that was accessible by push bike!
 
Anyway, late last year I found some renewed motivation, and have been working on it when time and money permit. Here is what it looked like in October:
 
 
OMG barn find?

 
Front suspension OK at first glance...
 

 
...but it has turned out the calipers had seized (so are away being rebuilt) and all the (brand new) ball joint boots had perished:

 
 
Quite a bit of welding is needed too, but I had a setback just before Christmas when we were burgled and my welder stolen
 

 
Crusty roof rail

 
I've cleared some of the crap away from it now (it's not stored at mine - I'd love to own somewhere that big!) so might be able to get more photos. Currently working on the rear brakes, and disappointed to find that the shotblasted rear axle is now starting to rust after two coats of POR15 and 7 years storage under cover...
 

A mate of mine at work has just restored this, and now it's (just about) finished, is selling it. He wants what seems like a fair price for it, and it might be my only chance to indulge a boyhood dream before values climb too high. And hopefully I shouldn't lose out!
Is there anyone around who knows the values they actually sell for? Obviously I've looked at adverts and completed eBay listings, but don't know if they reflect reality!