WANTED Rover 45 Haynes manual

[dieselnutjob]

Actually I only want a diagram showing which pins do what on the ECU connector on a 45 diesel, and what wires go to where on the diagnostic socket.

 

If anyone has a Haynes or other wiring diagram that they can sell or lend please let me know.

 

Ta

[blackbart]

i did have a rover 45 diesel a few years back, i may still have the manual in the garage. i can have a look tomorrow and if i still have it i could email you the picture you need if you want. i am in coventry, so not near enough to pop around, or you could have borrowed it. if thats any good to you mate.

[RedSparrow]

Online PDF, just print the pages you want:

http://ebookbrowse.com/rover-45-manual-pdf-d154347129

 

Or download the actual Haynes one:

http://www.filestube.com/query.html?q=rover+45+manual&select=All

[dieselnutjob]

Online PDF, just print the pages you want:

http://ebookbrowse.com/rover-45-manual-pdf-d154347129

 

Or download the actual Haynes one:

http://www.filestube.com/query.html?q=rover+45+manual&select=All

 

The first one is the owners manual.

 

The second one requires me to hand over a credit card number, which I'm not that keep on doing.

[hairymel]

 

from a one of the second links links

 

i have d/l and checked the haynes pdf, give me a minute and i will get it uploaded somewhere nice for you

[hairymel]

in the meantime look here for all sorts of proper looking info for a multitude of rover cars

 

http://www.mgrover-online.com/?p=249 (link is what you are asking for i think)

 

not knowing engine size, year or ecu type its the best i can do

[hairymel]

DNJ - you have pm with a link

[dieselnutjob]

thanks to hairymel I have this

 

 

I think that this means that

Pin 39 is ignition switched +12V

Pin 35 is ignition switched +12V

Pin 58 is K line (assuming that ECD3 means an L-series)

unfortunately none of the pictures show what pins are earth on the ECU

Wiring diagrams in Haynes manuals can be really poor

[hairymel]

from what i can tell the rover RAVE cd has the info you need but i do not have access to it here atm

 

back in a mo

[hairymel]

 

 

[dieselnutjob]

that's not the ECU I have

this is mine

Bosch 0281001956

[hairymel]

i think that is the probably the right one

 

the diagram shows the harness (car side plug) the ecu has no pins where they are not used

 

might be wrong though

 

no more free tec support tonight, i have to go collect a drunken o/h now

 

pm with useful pdf's in your inbox

[dieselnutjob]

it worked, so no more tech help needed.

thanks

 

only thing is that this ECU seems to be EOBD compliant and I didn't think that Rover 45s were...

looks like I need an older ECU

[hairymel]

wtf are you trying to do?

 

the ecu will give you some info with a k line type (vag) cable but not let you clear codes etc (possibly)

[dieselnutjob]

yes I remember now. With these you can read live data but you can't read error codes unless you go into secure mode first.

 

wtf are you trying to do?

 

reverse engineer the diagnostics protocol. The secure mode will be a challenge.

[RedSparrow]

 

The first one is the owners manual.

 

The second one requires me to hand over a credit card number, which I'm not that keep on doing.

 

Yeah, you need to click on the one that says 'free download'

[hairymel]

Autoshite is probably not the place for useful help in your quest, although in my experience the more on topic forums are not chock full of info/help either

 

i don't have the skill set to help you i am afraid.

 

my only thoughts would be to dump a relavent Sykes Pickavant ACR module to see what that's doing.

[dieselnutjob]

It's not the first one I've done. More like the twentieth, and the third with security features. Still if anyone has an ACR they want to lend me....