free radio code on t'interweb.

[kinkersaab]

Does anyone know how to do this? i have googled, but lots of stuff about "downloads" etc....

My little 106 has no code, and we dont have a pug dealer up here at the moment, i have removed the set, and have lots of numbers for anyone who knows how to do it.

 

serial no.. 0018756

model.. pu-9534a thanks in advance if anyone can do it.

[kinkersaab]

Does anyone know how to do this? i have googled, but lots of stuff about "downloads" etc....

My little 106 has no code, and we dont have a pug dealer up here at the moment, i have removed the set, and have lots of numbers for anyone who knows how to do it.

 

serial no.. 0018756

model.. pu-9534a thanks in advance if anyone can do it.

[Barry Cade]

Clarion code calculator I have says: 3324.

[Barry Cade]

Clarion code calculator I have says: 3324.

[kinkersaab]

Thanks Tiffx19, sadly that doesn't seem to work.

 

As payment i was going to give you the chance to replace the head gasket on the x19

 

any other relative 4 digit numbers welcomed.

[kinkersaab]

Thanks Tiffx19, sadly that doesn't seem to work.

 

As payment i was going to give you the chance to replace the head gasket on the x19

 

any other relative 4 digit numbers welcomed.

[Richard]

I've a feeling you need to open it up and look for a row of soldered links to calculate the code.

[Richard]

I've a feeling you need to open it up and look for a row of soldered links to calculate the code.

[ashmicro]

Original selling dealer? Maybe worth a punt.

[ashmicro]

Original selling dealer? Maybe worth a punt.

[Richard]

I reckon this one will do it http://www.eserviceinfo.com/downloadsm/1998/_.html

 

You'll definitely have to open it up and look for a row of links or diodes. Check the positions that are occupied and click "Gen" for the code.

[Richard]

I reckon this one will do it http://www.eserviceinfo.com/downloadsm/1998/_.html

 

You'll definitely have to open it up and look for a row of links or diodes. Check the positions that are occupied and click "Gen" for the code.

[kinkersaab]

Thanks.... original dealer is long gone.... i am just going to pop out and bring set back indoors, and will then try and open it up.......

 

the link that was posted baffled me with hyundai downloads or something...

if i open the set would you be able to tell me what to do? please?

[kinkersaab]

Thanks.... original dealer is long gone.... i am just going to pop out and bring set back indoors, and will then try and open it up.......

 

the link that was posted baffled me with hyundai downloads or something...

if i open the set would you be able to tell me what to do? please?

[Richard]

It's the Hyundai one you need to download. When you run the Exe file you will get something like this.

 

 

When you open the radio you should see a row of ten numbered positions on the board that could accept links. For each one that is linked click the corresponding number on the left side of the calculator and hit "Gen" once you have clicked all the link numbers.

 

If you want you can take a picture of the PCB/ tell me the numbers and I'll get the code.

[Richard]

It's the Hyundai one you need to download. When you run the Exe file you will get something like this.

 

 

When you open the radio you should see a row of ten numbered positions on the board that could accept links. For each one that is linked click the corresponding number on the left side of the calculator and hit "Gen" once you have clicked all the link numbers.

 

If you want you can take a picture of the PCB/ tell me the numbers and I'll get the code.

[kinkersaab]

 

here is a picture of a slightly twisted and broken radio innards. which bits mean anything?

[kinkersaab]

 

here is a picture of a slightly twisted and broken radio innards. which bits mean anything?

[Richard]

I can't see anything there but I've found more specific instructions on one of the calculators I have, which suggest that you need to look on the underside and near the front.

 

Remove base plate and look for the Micro

which is central near the front . To the right of

the stereo is a line of 10 solder joints . They

have either been joined with a blob of solder or

not . Click to show the solder joints or leave

open .

[Richard]

I can't see anything there but I've found more specific instructions on one of the calculators I have, which suggest that you need to look on the underside and near the front.

 

Remove base plate and look for the Micro

which is central near the front . To the right of

the stereo is a line of 10 solder joints . They

have either been joined with a blob of solder or

not . Click to show the solder joints or leave

open .

[kinkersaab]

hmmm.... the only thing i can see that looks like what im looking for is this...

 

the only one obv joined with solder is the first one.....

[kinkersaab]

hmmm.... the only thing i can see that looks like what im looking for is this...

 

the only one obv joined with solder is the first one.....

[Richard]

It looks like your code is 1112, the Hyundai one I showed above gives the same answer.

 

[Richard]

It looks like your code is 1112, the Hyundai one I showed above gives the same answer.

 

[kinkersaab]

Thanks. Have put stereo back together, it seems a little bigger than before, but brute force won, and its back in the dash. Awaiting for it to unlock, and will try and enter that code, failing that, I'll sing.

[kinkersaab]

Thanks. Have put stereo back together, it seems a little bigger than before, but brute force won, and its back in the dash. Awaiting for it to unlock, and will try and enter that code, failing that, I'll sing.