Jump to content

Tommy's A-series Misery - Collection caper!


Tommyboy12

Recommended Posts

24 minutes ago, juular said:

IMG_3757-scaled.jpg

5c7c35135a3a4c1e209e8b671e803dad.jpg?w=8

Highlands.jpg?quality=86&strip=all

16530736325_d316e1b569_b.jpg

 

Get it done, man!

I have been half-thinking about getting a wee drone to do some photography.

 I even studied the CAA regulations around them in my postgrad. I also have the perfect GT car for it now. A tall-geared, straight-6, leather-lined coupe.

Link to comment
Share on other sites

Its an easy enough fix. Ive done plenty of wheel bearings before! I know theres some reasonable quality bearings available but the design changed in 86 from a two piece to the more common one piece bearing. If mine is the two piece im at the mercy of NOS.

Link to comment
Share on other sites

Knowing ARG at that time, I'm guessing the bearing originated from a Morris Minor, was then modified to fit a Land Rover, had its part number changed six times, then had a spacer added to fit an Allegro (for 6 months only), then made NLA, then specified for the Montego with an oil seal from an Ital, with production changing to a different supplier after two weeks.  Currently on back order since 1991 😄

Link to comment
Share on other sites

10 hours ago, Rusty_Rocket said:

Knowing ARG at that time, I'm guessing the bearing originated from a Morris Minor, was then modified to fit a Land Rover, had its part number changed six times, then had a spacer added to fit an Allegro (for 6 months only), then made NLA, then specified for the Montego with an oil seal from an Ital, with production changing to a different supplier after two weeks.  Currently on back order since 1991 😄

Metro fwb were made at R.H.P. , Consett.

*as many went out the carpark (after a Nightshift...) as paletted on BL delivery lorries 🤫

Link to comment
Share on other sites

21 hours ago, Tommyboy12 said:

Its an easy enough fix. Ive done plenty of wheel bearings before! I know theres some reasonable quality bearings available but the design changed in 86 from a two piece to the more common one piece bearing. If mine is the two piece im at the mercy of NOS.

Quite often if you use the bearing number rather than application it can work out alot cheaper

Link to comment
Share on other sites

So I got the hubs off on both sides. I have the one piece bearing which is good news because there's much more availability. It was definitely knackered on the drivers side. There was a roller facing the wrong way and it basically fell apart. However, that circlip is a problem...

PXL_20211009_093930378.thumb.jpg.7ebfd5e58947f28ba182ddc163e4278a.jpg

PXL_20211009_093941031.thumb.jpg.c6ec8e9280ff7827ee2012f43ab42164.jpg

PXL_20211009_094357191.thumb.jpg.95008a53f1a963a13f22d593ae410abc.jpg

PXL_20211009_094648193.thumb.jpg.fa764e7c31f938f9ff9e6726643ef7f1.jpg

 

Link to comment
Share on other sites

So these circlips were a bit of a pig to get out. Rusted in but they're all out now thanks to some gentle persuasion and lots of heat as mentioned. The company I've bought the bearings off has kindly been in touch to check dimensions and application (apparently this bearing is pretty prolific). Should hopefully have them in a couple of days then I can get a garage to press them out and new ones in.

PXL_20211011_093514889.jpg

Link to comment
Share on other sites

  • Tommyboy12 changed the title to Austin Montego Poverty Estate - New wheel bearings inbound
48 minutes ago, Dobloseven said:

Are the outer races two separate  pieces? With each part going in from opposite ends, held in with a circlip?You might be able to drift them out and press the new ones in with a vice. 

Outer race is a double angled roller bearing like most modern designs. Press fit. The early Montegos had a two piece ball bearing arrangement with a machined spacer between them similar to the classic Mini which was apparently more prone to failure. The Haynes I have describes knocking them in and out with a punch and the old race like a Mini too. Mine is the crossover year between two piece and one piece (and the VIN is near the crossover too) so I had to take them off first to be sure. Some replacement bearings are double roller but I've deliberately sourced double angled tapered which can support more load for the MAAAADDD power I'm putting down.

Link to comment
Share on other sites

Bearings are at the garage being pressed in so in the meantime I spent lunch time clocking my NOS Speedo ready for fitting. Will be nice not to hear the incessant ticking of the Speedo. Not sure if I mentioned it but the odometer also packed up on the trip too just as it was turning over to 283k so I've added the distance between odometer failure and wheel bearing collapse. I wouldn't want to miss out on that mileage of such a trip!

PXL_20211012_132142651.jpg

PXL_20211012_133354288.jpg

PXL_20211012_135618796.jpg

Link to comment
Share on other sites

  • Tommyboy12 changed the title to Austin Montego Estate - Occasional appearance of the rest of the fleet

Despite all the time I spend on the Montego I actually have other cars to maintain and I thought I might start adding a few updates to this thread and making it somewhat of a fleet thread like others. The white Mini I own has appeared on this thread already with bearing collapse (sounds familiar 🤔) when I tried to get to FotU. I also own another mini which is a car I have had for 12 years. A 1989 Austin Mini with a biiiig turbo. It's rat look and scruffy but it's hiding 170hp.

PXL_20210321_104932751.thumb.jpg.34ccc727926bf96428a7434ae65117d6.jpg

IMG_20200330_104725.thumb.jpg.425e9b6de8d36e9bd854dc8caea34e2a.jpg

It's always suffered from high temps and oil pressure that dips when it gets hot, although it does maintain a healthy 60psi at speed. So i clocked off early today and have fitted myself an oil temp gauge to try and understand a bit more what's going on. Unfortunately the A-series doesn't really lend itself well to measuring oil temps did to the way the oiling system works so I've had to settle for an in-line temperature sensor between the oil filter housing and the block. It's also after the oil cooler I already have fitted but unfortunately it's the best I can do.

PXL_20211014_143722660.thumb.jpg.468052efdce502b835e1532956fde89c.jpg

Because I have a big front mound I have bracketry in the way so getting the oil filter off might be an issue. Think I'll have to reconsider my intercooler mounting and shorten it. You can see I already had to cut a chunk out. It's also going rusty.

1049006583_PXL_20211014_1437142263.thumb.jpg.01319b06f2d3389597f47a6c77643b95.jpg

Temp gauge is temporarily in place while I think about how I mount a fourth gauge. I like the gauge pod I have and you can buy a quad version so think that's the way I'll go.

PXL_20211014_162840855.thumb.jpg.22133affedce8fcc6aa6c262d527a809.jpg

No chance to run it up this evening but I'm now able to actually start to measure my oil temps rather than just pressure.

If you guys want a bit more on this car I'm happy to share. It's my baby and despite it looking ratty I lavish the mechanicals.

Link to comment
Share on other sites

8 minutes ago, Tommyboy12 said:

 

PXL_20210321_104932751.thumb.jpg.34ccc727926bf96428a7434ae65117d6.jpg

If you guys want a bit more on this car I'm happy to share. It's my baby and despite it looking ratty I lavish the mechanicals.

Yes. I love the way the Mini couldn't be any further removed from the Montego in any shape or form. I'm also a sucker for getting sentimental about cars- I've owned my MR2 for six years - a personal record by far - and it's staying forever. 

Link to comment
Share on other sites

49 minutes ago, Dick Longbridge said:

Yes. I love the way the Mini couldn't be any further removed from the Montego in any shape or form. I'm also a sucker for getting sentimental about cars- I've owned my MR2 for six years - a personal record by far - and it's staying forever. 

Definitely couldn't be much further removed from the Montego. Both quirky in their own way though. Much like yourself I couldn't possibly let it go of it!

11 minutes ago, hairnet said:

when is the mini engine going in the tego :D (kidding)

 

I did contemplate turbocharging the A-series in the Montego for a very short while but I actually like it being the most poverty of poverty!

 

Link to comment
Share on other sites

A bit more about it then! Essay incoming!

As mentioned I've had the car 12 years. It was my first classic and was my dream car and still is today. It helped me learn everything I know about working on cars and really got me into modifying cars too. It's been through a few iterations, paint jobs and engines to get to where it is today but honestly its never mattered what setup it is I just love it. I'll keep it forever and hopefully drive it until I can no longer drive myself.

The car itself:

 Its pretty heavily modified incase it wasn't entirely obvious! It's not for the purists... Which is actually the reason I keep my other one as I do. It's nice to have a period/standard Mini and this one looking ratty. Two ends of the spectrum.

PXL_20210530_113151019.thumb.jpg.7d96a8e87eb4f48df32e3559bcc924fe.jpg

PXL_20210801_112143236.thumb.jpg.4c24d2e351c8c9f51de9e134625c75f9.jpg

Aside from running a turbo lump which I will get to its on coilovers all round, has a beam rear subframe and has had the boot floor partially flattened. The rear arches are fully tubbed too. Minis are low but this is really low. It's a good 2-3" lower than a Mini at normal ride height and about as low as you can get without serious work to the front subframe. Tubbed arches below. For those that don't know it basically involves cutting out the lip which is gets in the way on lowered minis and replacing it with flat steel. Best demonstrated from the inside.

IMG_20200418_105227.thumb.jpg.a30c5f989a154492429b7b4a04db1e9d.jpg

Before tubbing. Note the big crevis which can rub on the tyre.

IMG-20200418-WA0007.thumb.jpeg.a53d24c4d58fbf488e50d49c7adcf505.jpeg

After.

IMG-20200418-WA0009.thumb.jpeg.900e630e8dc4156351d64dc8ca1b90e7.jpeg

Front end is fibreglass and fully removable. Was like that when I bought it and I've never felt inclined to return it to original. Makes doing engine work a doddle too.

PXL_20211014_195022807.thumb.jpg.98c2f164efe93fc3d46974eefb814d39.jpg

I suppose the killer bit is the engine itself! It's a 1293cc overbore from a Metro Turbo. Forged pistons, standard rods and crank but running a modified centre bearing cap. Lightweight steel flywheel with a twin spring clutch to take the torque. Gearbox is a straight cut gear set but with helical drop gears. In simple terms it has classic straight cut whine in 1st, 2nd and 3rd but 4th gear is direct drive from the drop gears and therefore entirely helical and quiet. It's a compromise considering the power it runs but I do drive to a lot of shows and am already pretty deaf without making it worse.

It runs a Garrett T3 from the Metro, Montego/Maestro turbo plenum, turbo carburettor, and a Megajolt mappable ignition which uses a custom ECU to feed into a Ford EDIS ignition module and coil pack. The cylinder head came with the engine and is a work of art but it's a ticking time bomb. There is basically zero meat between the valves which is an absolute no-no in reality. The photos below should help you understand why! It runs at 7.5:1 compression ratio and 26lb of boost. I have pushed it to 30lb before but in all honesty it's too much. The compression tester readings are 85psi across the board 😂

I mostly built it myself.

received_296189684397472.thumb.jpeg.32d256473dd2969d4bf9eaf00e4ec4fb.jpeg

received_479382359399451.thumb.jpeg.e2aa8f4c6183047dcda50232877ccfed.jpeg

received_180567003349095.thumb.jpeg.d126ee528bdd3e3dc8c0951d9d8e7e08.jpeg

IMG-20190615-WA0005.thumb.jpeg.a683613760af1b0f4f8a4a4db0f33835.jpeg

received_1916688648445396.thumb.jpeg.f555b2261631b68a884c4d69e48a231b.jpeg

received_2347659875319303.thumb.jpeg.9fbdc4de67fba3f165a00f4445066fd5.jpeg

received_458287725024420.thumb.jpeg.d4c43f698afa18f61b8316dc915103c8.jpeg

The Dyno spat out 170hp at the crank when I tested it. It's quick! Dusting cars is easy when you weigh 600kg and I have had it bouncing off the limiter in 4th which is about 120mph (race track). It could pull more but I like to try not to eject the crank from the block!

So yeah! That's my turbo Mini!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...