Jump to content

I'll get round to it at some point - Everything is Broken: the sequel


Rust Collector

Recommended Posts

  • Rust Collector changed the title to I'll get round to it at some point - Colekshun day!

And after an unusually uneventful drive, I found myself back in sunny Seaford:

BF22B9D2-8173-429A-8E6F-EB3E60C041C5.thumb.jpeg.8fa3a3b22f5ee41bd3f31f6348c6ab84.jpeg

A5EE33A1-8C53-4773-B8CC-2F03BF0B1BBE.thumb.jpeg.6812f5222db3d046d5e9f4b62ed0fd6b.jpeg

Best not stop here too long or there’ll be nothing left of either vehicle. A dog walk was in order for Daisy first though as a reward for being patient and not destroying the inside of the Mitsubishi during co-driver duty.

7C2EF6B3-FC67-4104-83AC-8C27AD5A880D.thumb.jpeg.a683441380c137b8b437a25ac7e4e5a5.jpeg

It’s a bit late/dark to be fucking around unloading cars and swapping things around, so the 4x4 and trailer have been taken to a top secret location* for the moment for the benefit of the neighbours.

I’ll get the front brakes sorted on the Lada in the near future and then get my head around the welding.

All in all a successful day!

Link to comment
Share on other sites

8 minutes ago, Rust Collector said:

And after an unusually uneventful drive, I found myself back in sunny Seaford:

BF22B9D2-8173-429A-8E6F-EB3E60C041C5.thumb.jpeg.8fa3a3b22f5ee41bd3f31f6348c6ab84.jpeg

A5EE33A1-8C53-4773-B8CC-2F03BF0B1BBE.thumb.jpeg.6812f5222db3d046d5e9f4b62ed0fd6b.jpeg

Best not stop here too long or there’ll be nothing left of either vehicle. A dog walk was in order for Daisy first though as a reward for being patient and not destroying the inside of the Mitsubishi during co-driver duty.

7C2EF6B3-FC67-4104-83AC-8C27AD5A880D.thumb.jpeg.a683441380c137b8b437a25ac7e4e5a5.jpeg

It’s a bit late/dark to be fucking around unloading cars and swapping things around, so the 4x4 and trailer have been taken to a top secret location* for the moment for the benefit of the neighbours.

I’ll get the front brakes sorted on the Lada in the near future and then get my head around the welding.

All in all a successful day!

I’m sure you’re going to have a Lada fun together! Sorry couldn’t help myself 😂

Link to comment
Share on other sites

  • Rust Collector changed the title to I'll get round to it at some point - Lada Boughted

Not much has been done in the last few days as I’ve been back at work after my paternity leave so I’ve been a bit lazy in my free time. The last couple of evenings I’ve strategically walked the dogs past the Lada to have a go starting it for unloading. The battery was a bit tired however from my deft attempts so I brought it home and charged it. This evening I took it back down with me, chucked the battery on and we have life!

Best unload her then, and take some photos in the dark:

29E5CF1F-73C5-4E0B-9EE8-7A0F070AED1A.thumb.jpeg.6ad8146532470fd17a8d3a3b91e0d4c3.jpeg

95931C1F-50FC-465C-BEB0-9A2B4C9D21C7.thumb.jpeg.85cb291dafdebe7fdcfb508e267d33be.jpeg

E4A6D967-2D47-4D29-8E3D-1F6707B5DFFF.thumb.jpeg.8be98f05d73fa701c2df2f4912cae045.jpeg

I went for a short drive around town to get some more petrol and find out what the seized calliper was like. I don’t think I’ve ever driven anything quite like it, it’s really an experience*. I love it. I wasn’t brave enough to go far/fast enough to upset the brakes. Also shout out to the FIAT engineer who originally thought that putting the stalk that controls your headlights directly behind the smaller stalk for the indicators was a good shout; you don’t feel truly alive until you go to turn right on a dark road and turn your headlights off.

What I really should be doing is welding up the BX that I’m meant to be selling, so I may try and get that done over the next few evenings as I’ve been putting it off long enough now.

Link to comment
Share on other sites

More fun in the dark this evening. I’ve decided the best* course of action is to do some road testing to find any niggles on the Lada, mainly because the driveway is full but also because I want to drive it. Best go retrieve it from the dumping ground then:

3B5AFE1E-B37B-4697-A26F-CF74FA817D5D.thumb.jpeg.cb6bfdef5e80fbbbbaddfa318d3d6e3e.jpeg

First trial was a trip across town to pick up some shopping that my partner had tasked me with

2DA6F7CA-4A69-4F2D-A1A8-5282B7C5A99F.thumb.jpeg.264faac6a2c69ab437355a271de460f8.jpeg

I then decided to be brave and went for a drive down the country lanes between Seaford and Alfriston via Litlington. I’m pleased to say I made it without any FTP action, and I’ve found some things to look at.

On turning right at speed* and under braking there’s a grumble from the front which sounds like a bearing. They’re easy to check/adjust/replace so that’s a small job for the near future. Both felt quite warm to the touch when I stopped to check.

When driving up the steep hill between Alfriston and High and Over (for those of you familiar with the area) I found that the clutch was slipping. It went up in second screaming its tits off, but in third the revs would climb but the car would slow down! I need to consult HBOL to see if there’s any adjustment in the clutch (the pedal is very notchy) but otherwise I suspect the best course of action is to get the box off and look at fitting a new clutch kit. For now I’ll just stick to flat roads 😅 proof I made it and didn’t roll back down and get stuck in the valley:

DE4ECF4A-3DD8-40E2-8653-06BD9F1309CA.thumb.jpeg.22297d08f1879a4120eb55faeb078034.jpeg

Another small thing to look at is the exhaust. I’m unsure if the hangers on it are correct as it’s slapping around on the undercarriage like something from a special interest video. The witness mark confirms this

DB148EE7-FBDE-4908-9AE8-B0A8EAC02AD7.thumb.jpeg.0c686a8e487bae18d0295fbc63a0f8c4.jpeg

Now that I know it’s nothing mission critical I can at least put that noise on the ‘ignore’ list.

The dash light is out, I was going to investigate when it decided to come on this evening which was a bonus

C29EA92A-C327-49FE-A3B5-A06DE033D05D.thumb.jpeg.dd0cade165f45eb53fbc4dfebd5d9caf.jpeg

It subsequently fucked off again the next time I started the car, so I guess I will have to take it out. I tried giving it a Fonzy style whack to the top and it didn’t respond sadly.

In more boring news, the battery that I ordered on Monday via a next day delivery service arrived today, so I could finally consider starting my Insight and unclogging the drive. This was £36 shipped which I didn’t think was bad value:

C0C3CA61-524E-473B-9C2A-552A578183F7.thumb.jpeg.e34068fa31c560e88d5455249058b22e.jpeg

And in the car:

A557040A-CEA6-4289-923B-11466195C237.thumb.jpeg.6635416f2ee2c20c27ed1780d33dee69.jpeg

Could I find the plastic battery tray that I took out because the last battery was slightly too fat? Could I fuck. Oh well.

I can’t remember if I posted about the fun* I had trying to use the Insight a while back but finding it had sunk into the lawn during the heavy rain. There’s still some evidence of my struggle left:

D5DFE3C5-42A9-4CA7-AE64-A3EA27C31E9C.thumb.jpeg.16f6f06cddf308a5628f6f1d2698a8a4.jpeg

12v power restored:

3BBC9C06-604D-4EAB-82C5-FED93ECA9652.thumb.jpeg.48b85d4a3b66da97274c190ddbff6dd6.jpeg

Best charge the ‘big’ battery so that the battery control module can recalibrate

8BA9DC89-9671-40D5-9DD2-A4CBAE873EBE.thumb.jpeg.ad657969130eb26f4c634fa979f88e26.jpeg

That’s enough enjoyment for one evening I reckon. If I keep getting through the small jobs though, I’m going to have to finally weld the sills on the BX…

Link to comment
Share on other sites

On 11/26/2022 at 11:55 PM, High Jetter said:

High'n'over at night? Fun times! 🤣

There was only one steamy car up there that night, must be the cold weather!

20 hours ago, Zelandeth said:

You'll get used to the lighting stalk quite quickly.  I've found that flailing around looking for it getting back into a car with only two stalks is usually more of a problem!

I do quite like the satisfying clicks and clunks that you get from flicking the dash switch then moving the lever. Fortunately I've gotten used to it fairly quickly and I have not inadvertently turned my lights off since!

10 hours ago, Alan_Green said:

Can you start the Lada with a starting handle?

You can, and I have the handle in the boot, but:

9 hours ago, High Jetter said:

Yes but it's easier with a key :)

What he said 😅 I will have a go at some point just for the novelty, but I'm a bit wary of snapping my thumbs off.

Link to comment
Share on other sites

Extended road testing has continued over the weekend.

First up was a trip to my mate's house via the back roads

7.thumb.jpg.43c43c59e807337351a3549334624faa.jpg

8.thumb.jpg.0fdfb8316c044e24dd6684f544eb953e.jpg

All is still well bar the clutch, but for the moment that can be driven around. In anticipation of replacing it I have spent the huge amount of £20.65 on a clutch kit from Germany, which will definitely* be of high quality and be posted FOC as per the listing. You can all point and laugh when it falls apart 100 miles later and I have to buy better kit and do it all again.

Last night we were blessed with torrential rain and so I thought it a good time to do a test run of my commute. I made it there and back safely.

9.thumb.jpg.9c6f1207d755027c3a6af0b554c356f3.jpg

Geed on by this triumphant achievement, I left the moderns at home this morning and drove to work in the Lada.

10.thumb.jpg.f692a745bab4007b4887a054d84e0ae5.jpg

It wasn't too bad driving it in modern traffic on my commute, despite a short section of NSL single carriageway, as the traffic round here is so heavy at rush hour that you rarely see more than about 40mph. In a moment of madness I put a full tank of super unleaded in the car, so I've committed to giving it some level of regular use this month!

This is probably one of the most enjoyable purchases I've made recently, it really is good fun to drive. It makes me think I should really try and get the ZAZ running and registered in the near future for even more 70's Eastern Bloc fun.

Link to comment
Share on other sites

1 hour ago, Zelandeth said:

Amused me that the provision for the starting handle was still there on my Niva despite it dating from 1997.  Though you would have had to unscrew the number plate to use it.

 

I'd be grateful if my SLK had a hand crank, as it's an auto and the modified starter motor hasn't been ground down enough to engage properly! It's a right faff to take back out again now the engine is in...

Link to comment
Share on other sites

Boring jobs on the Insight today.

After putting the winter tyres on a pair of steelies as a desperate attempt to get the Insight out of the swamp/my front lawn I was a bit lazy and left the alloys on the back. I finally got the other matching pair of winter tyres on to the other pair of steelies yesterday, and fitted them on my lunch break today

6.thumb.jpg.76c97c76f0a22618d29cb760c4c66d08.jpg

Rare pic of her with her skirt lifted:

7.thumb.jpg.45125e213c3b4728df77e48a55b722fa.jpg

And the finished article now that I've raided the stores cupboard for cable ties:

8.thumb.jpg.850efac838e70a60ceaf53cf08076bfd.jpg

I quite like how it looks on steel wheels, but I'm unsure if that's just because I've been spending too much time of late ogling shite cars.

I also spotted I had a dipped beam out this morning, which is handy as I need to drive up to Gatwick tonight to pick up mother-in-law. I kept the 'good' bulb from the last pair in the glove box which was lucky so I've quickly sorted that. The H4 bulb that had blown was one of a pair of cheap chinesium yellow ones from Amazon, which are obviously really shit as I only fitted them in the Summer. The yellow ones that were in it when it came from Japan lasted years!

Whilst removing the coolant reservoir to get to the bulb I noticed that it's nearly empty - I'll chuck a bit more coolant in and keep an eye on that.

In exciting* local news I received an email to say that the hosepipe ban has been lifted, so I may get to wash some of the 'hedge find' cars soon which I've been itching to do.

 

Link to comment
Share on other sites

Seeing as mother in law is visiting I have been looking for activities outside of the house. I've been doing a bit of parts shopping as well, so it seemed like the perfect time to get on with something I'd been planning to do on the Lada.

The noise from the front end has been causing a lack of confidence whilst driving, so that was the main priority to diagnose and sort.

Best get the front end up in the air and give everything a spin then. The drivers side immediately made the noise of a grinding bearing. I did my due diligence and removed the brake calliper just in case, and the noise remained. I will try and upload a youtube video at some point for your viewing pleasure, but at the moment I'm failing miserably to work out how to do it.

IMG_7626.thumb.JPG.c27451c4aa452a425240014e53afadbe.JPG

'New' bearing ordered then:

IMG_7616.thumb.JPG.0c98562d9b3808fb0b194ecef6a16512.JPG

IMG_7597.thumb.JPG.2bc8d82f6ff2369e9a1d24cb63dba588.JPG

Time to pull the old one apart. There was a bead of silicone or similar round the bearing dust cap which is a new one on me - water proofing?

IMG_7629.thumb.JPG.bf7a9b3fa3dbbd3d80b33b2e8f70141a.JPG

There was some grease inside so it hadn't run dry. 

IMG_7631.thumb.JPG.db898d2128d9fd6998e6fa1d63d1885c.JPG

Spindle all cleaned up using a pair of my old pants - looks ok

IMG_7637.thumb.JPG.81082e7f0a4121cc65631eb4271352d6.JPG

The front bearing out on the bench:

IMG_7638.thumb.JPG.4682603ccb4b23913b48c44e5f224d6f.JPG

Some Cyrillic markings on the reverse:

IMG_7639.thumb.JPG.55c4b5d8dd9c621803467923a71dd7ff.JPG

I think this is the rear race just before it got beaten into submission with a hammer:

IMG_7643.thumb.JPG.66edb87ea641bd5efd67a7fbfb1830ee.JPG

My phone went flat at this point so I couldn't take more pictures. It was about 8pm and the races were stubborn bastards to come out, but I wanted to draw things to a close that evening with the new races installed so I continued the hammering session to remove the old ones.

IMG_7647.JPG.9dffdfd6c06b15c681d812993208dd6f.JPG

I had put the new races into the freezer for a bit so that they contracted slightly, and I 'pressed' them into place with one of these jobbies. They went in no bother.

 spacer.png

That was a good place to leave it for a Sunday night.

Last night I came back to it, not many pictures as I was rushing so I couldn't be accused of not wanting to spend time with my family.

I packed the bearings with grease, being a sucker for a unnecessary tool I got to use this thing for about the second time ever:

spacer.png

I'd say it keeps the grease off your hands, but I was already covered in grease so it was kind of pointless in that regard. It does force grease through the bearing nice and evenly though.

Reassembly the reverse of removal:

IMG_7657.thumb.JPG.ec62823f26dd6685d16da5032bdf7c27.JPG

IMG_7658.thumb.JPG.8c67feb860f0f884179d62e012a20db5.JPG

It's worth noting that the nut securing the bearing is a left hand thread on this side. Don't be a twat like I am and assume your torque wrench works in reverse just because it has a reverse setting. I have snapped my 1/4 inch drive baby torque wrench as a result of this oversight. Without an appropriate torque wrench I did it the highly scientific way of 20nm by calibrated* feel to seat the bearing, then backed it off an nipped it back up again gently before staking it down.

The only thing left to do was drive it and see if the noise was gone/the wheel was going to fall off. Enjoy some grainy photos of the drive to Sainsbury's that were definitely taken by a passenger.

IMG_7681.thumb.JPG.755d6290c667a2c211e0dcccbf758a87.JPG

IMG_7686.thumb.JPG.7766695026b8100b8a4d0d9d719176c4.JPG

IMG_7693.thumb.JPG.93b2976c843e29a17118bf66865a93eb.JPG

I'm pleased to say that the Lada got there safely and The Noise™️ is gone. All that's left is the multiple other noises of a 43 year old car built in Russia and maintained* for decades in Hungary.

Celebratory Sainsbury's carpark photo:

IMG_7696.thumb.JPG.24b10f36cec2b177eac5c4ba6cf6cf72.JPG

Now the hosepipe ban has been lifted I may even wash the Lada soon. I need to get some exhaust hanger straps for it too as that will cure one more noise. Whilst I had the front end up I got a chance to have a brief look at what welding I need to do in the near future. There's a hole in the rear floor pan and one of the front chassis rails, a lot of it looks like it's bits that can be fabricated but once I get a dry weekend I will aim to get under there for a better look so that I can form a proper plan and order any repair panels that may make life easier. My £20 clutch arrived too so I should probably fit that soon as I can't currently get over about 80km/h on the flat without the clutch slipping!

I absolutely love this car though, I've said it before but I think it's one of the most enjoyable motors I've bought in a long time. It's exactly the sort of thing I needed to get some enthusiasm again now that the shitty weather and dark evenings are here!

Link to comment
Share on other sites

  • Rust Collector changed the title to I'll get round to it at some point - Lada: Finding my bearings
On 12/6/2022 at 1:46 PM, Rust Collector said:

Seeing as mother in law is visiting I have been looking for activities outside of the house. I've been doing a bit of parts shopping as well, so it seemed like the perfect time to get on with something I'd been planning to do on the Lada.

The noise from the front end has been causing a lack of confidence whilst driving, so that was the main priority to diagnose and sort.

Best get the front end up in the air and give everything a spin then. The drivers side immediately made the noise of a grinding bearing. I did my due diligence and removed the brake calliper just in case, and the noise remained. I will try and upload a youtube video at some point for your viewing pleasure, but at the moment I'm failing miserably to work out how to do it.

IMG_7626.thumb.JPG.c27451c4aa452a425240014e53afadbe.JPG

'New' bearing ordered then:

IMG_7616.thumb.JPG.0c98562d9b3808fb0b194ecef6a16512.JPG

IMG_7597.thumb.JPG.2bc8d82f6ff2369e9a1d24cb63dba588.JPG

Time to pull the old one apart. There was a bead of silicone or similar round the bearing dust cap which is a new one on me - water proofing?

IMG_7629.thumb.JPG.bf7a9b3fa3dbbd3d80b33b2e8f70141a.JPG

There was some grease inside so it hadn't run dry. 

IMG_7631.thumb.JPG.db898d2128d9fd6998e6fa1d63d1885c.JPG

Spindle all cleaned up using a pair of my old pants - looks ok

IMG_7637.thumb.JPG.81082e7f0a4121cc65631eb4271352d6.JPG

The front bearing out on the bench:

IMG_7638.thumb.JPG.4682603ccb4b23913b48c44e5f224d6f.JPG

Some Cyrillic markings on the reverse:

IMG_7639.thumb.JPG.55c4b5d8dd9c621803467923a71dd7ff.JPG

I think this is the rear race just before it got beaten into submission with a hammer:

IMG_7643.thumb.JPG.66edb87ea641bd5efd67a7fbfb1830ee.JPG

My phone went flat at this point so I couldn't take more pictures. It was about 8pm and the races were stubborn bastards to come out, but I wanted to draw things to a close that evening with the new races installed so I continued the hammering session to remove the old ones.

IMG_7647.JPG.9dffdfd6c06b15c681d812993208dd6f.JPG

I had put the new races into the freezer for a bit so that they contracted slightly, and I 'pressed' them into place with one of these jobbies. They went in no bother.

 spacer.png

That was a good place to leave it for a Sunday night.

Last night I came back to it, not many pictures as I was rushing so I couldn't be accused of not wanting to spend time with my family.

I packed the bearings with grease, being a sucker for a unnecessary tool I got to use this thing for about the second time ever:

spacer.png

I'd say it keeps the grease off your hands, but I was already covered in grease so it was kind of pointless in that regard. It does force grease through the bearing nice and evenly though.

Reassembly the reverse of removal:

IMG_7657.thumb.JPG.ec62823f26dd6685d16da5032bdf7c27.JPG

IMG_7658.thumb.JPG.8c67feb860f0f884179d62e012a20db5.JPG

It's worth noting that the nut securing the bearing is a left hand thread on this side. Don't be a twat like I am and assume your torque wrench works in reverse just because it has a reverse setting. I have snapped my 1/4 inch drive baby torque wrench as a result of this oversight. Without an appropriate torque wrench I did it the highly scientific way of 20nm by calibrated* feel to seat the bearing, then backed it off an nipped it back up again gently before staking it down.

The only thing left to do was drive it and see if the noise was gone/the wheel was going to fall off. Enjoy some grainy photos of the drive to Sainsbury's that were definitely taken by a passenger.

IMG_7681.thumb.JPG.755d6290c667a2c211e0dcccbf758a87.JPG

IMG_7686.thumb.JPG.7766695026b8100b8a4d0d9d719176c4.JPG

IMG_7693.thumb.JPG.93b2976c843e29a17118bf66865a93eb.JPG

I'm pleased to say that the Lada got there safely and The Noise™️ is gone. All that's left is the multiple other noises of a 43 year old car built in Russia and maintained* for decades in Hungary.

Celebratory Sainsbury's carpark photo:

IMG_7696.thumb.JPG.24b10f36cec2b177eac5c4ba6cf6cf72.JPG

Now the hosepipe ban has been lifted I may even wash the Lada soon. I need to get some exhaust hanger straps for it too as that will cure one more noise. Whilst I had the front end up I got a chance to have a brief look at what welding I need to do in the near future. There's a hole in the rear floor pan and one of the front chassis rails, a lot of it looks like it's bits that can be fabricated but once I get a dry weekend I will aim to get under there for a better look so that I can form a proper plan and order any repair panels that may make life easier. My £20 clutch arrived too so I should probably fit that soon as I can't currently get over about 80km/h on the flat without the clutch slipping!

I absolutely love this car though, I've said it before but I think it's one of the most enjoyable motors I've bought in a long time. It's exactly the sort of thing I needed to get some enthusiasm again now that the shitty weather and dark evenings are here!

All good progress!

In case you're wondering (and I know the audio isn't great) here's how much difference that another 20 years of progress made to the refinement levels.

https://youtu.be/vv8f-PxNSGE

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...