There's nothing here yet
What do you get after 16 hours and 800 miles of driving on a Sunday to collect two cars? Well @sharley17194 picks up a 1997 Citreon AX from the depths of the Lakes on the North West coast past Keswick. However, we actually started the day by driving to just near Cromer on the East coast to pick up this!
An Austin Montego poverty spec estate with a 1.3L A-series engine! Yes you did read that bit right! Yes I know the DVLA lists the model as 1.6... Yes its correctly registered as 1.3L. No I dont know if its a factory 1.3L! 😂
My favourite part of all this??? (Apart from the doom blue colour and the absolutely terrible interior!) 281,000 miles on the clock!
Collection went really well and the below posts follows my initial assessment of what is quite frankly the best car I have ever purchased.
Zel's Motoring Adventures...Jag, Citroen, Mercs, AC Model 70 & A Sinclair C5...25/09 - Cavalier Decisions...By Zelandeth
Well I've been meaning to sign up here in forever, but kept forgetting. Thanks to someone over on another forum I frequent poking me about it recently the subject was forced back into my very brief attention span for long enough to get me to act on the instruction.
I figure that my little varied fleet might bring you lot some amusement...
1993 Lada Riva 1.5E Estate (now fuel injected, as I reckon the later cars should have been from the factory...).
1989 Saab 900i Automatic.
1987 Skoda 120LX 21st Anniversary Special Edition.
1985 Sinclair C5.
2009 Peugeot 107 Verve.
Now getting the photos together has taken me far longer than I'd expected...so you're gonna get a couple of photos of each car for now, and I'll come back with some more information tomorrow when I've got a bit more time...
Firstly...The Lada. Before anyone asks - in response to the single question I get asked about this car: No, it is not for sale. Took me 13 years and my father's inheritance to find the thing.
Yes, it's got the usual rusty wings...Hoping that will be resolved in the next couple of months.
Next, a proper old Saab. One of the very last 8 valve cars apparently, and all the better for it. I've driven two 16v autos and they were horrible - the auto box works sooooo much better with the torque curve of the 8 valve engine. Just wish it had an overdrive for motorway cruising...
Next up a *real* Skoda...back when they put the engine where it belongs, right out the back. In the best possible colour of course...eye-searingly bright orange.
Seat covers have been added since that photo was taken as it suffers from the usual rotting seat cloth problem that affects virtually all Estelles.
Then we have possibly the world's scruffiest Sinclair C5...
Realised when looking for this that I really need to get some more photos of the thing...I use it often enough after all! We have a dog who's half husky, so this is a really good way of getting him some exercise.
Finally - again, I really need to take more photos of - we have the little Pug 107.
Included for the sake of variety even if it's a bit mainstream! First (and probably to be the only) new car I've bought, and has been a cracking little motor and has asked for very little in return for putting up with nearly three years of Oxford-Milton Keynes commuter traffic, before finally escaping that fate when my housemate moved to a new job. Now it doesn't do many miles and is my default car for "when I've managed to break everything else."
I'll fill in some more details tomorrow - I warn you though that I do tend to ramble...
To mark the genesis of my fleet project thread I here present my new car: a 1997 Nissan Micra Shape-
It really looks that good. There is a reason for this: its previous owner was an old lady who loved the thing so much so she made every effort to keep it in good shape. It originally came from Fleet in the GU postcode which suggests to me it was bought by the present dealer at auction, hence arriving down here in Kent. Before seeing the car I checked its MOT history and its only fails were thanks to broken stoplights, which shows me that it was very well cared for. I suppose an example of this was that on the last MOT, an advisory was a corroded rear silencer. The silencer on the car when I saw it was new. Methinks the lady wanted to keep it as good as possible. It was kept in a garage and so all the bumpers and black trim are very black and the tyres are in very good condition. Spare never used! Also included a free Dettol first aid kit from 1997.
This car has 15000 genuine miles on the clock. We clocked over 15000 during the test drive! The lady owner really only trundled around her village in it and the MOT shows that it only did some meagre miles between tests. This, of course, came at a price. We saw a cherry red Micra from 2002 at the same dealer. Paint was shoddy and when they washed it the boot had massive sections of bare metal and it wasn't very happy. This car, however, is in fabulous condition and there was no contest between the two cars- it really is that good, inside and out. Immaculate interior, driver's airbag, cassette player... all there and all functioning (apart from cassette thanks to new battery and failed display). This meant that I bought it for £1600, £100 over what was my uppermost limit, but I knew I wouldn't see another like this that was in as good shape for a fair while. It was priced very ambitiously, at £1990, so I'm content in the fact I managed to slash a few hundred off the price. There wasn't that much paperwork though. All the dealership received was the logbook with 3 service stamps from 1998, 1999 and 2000, the radio key pass, a National Trust sticker, and the original paperwork holder. I suspect the old lady died and had her car auctioned, and the massive file of paperwork is now someone's egg carton, along will everything else she owned.
As always, this car isn't exactly in showroom condition. While the inside is great and the floor is solid, and the underseal is in great shape, the not undersealed parts need a small looking at. Mainly the rear of the driver's side sill. It's really the only bubbling on the car. I suspect a well aimed stonechip managed to fester over the wintery salted roads, making it rust even more. It's around the size of a 5p piece, and will give me the opportunity to spray the insides of the sill with some chain oil to prevent any further corrosion. Behind the fuel tank there are a few rusty joints- places where the spraygun cannot get paint onto- which some Vactan and Dynax should put to rights. Alternator belt looks original because of the cracking and Nissan badges and will need doing soon as well as the front plate. As much as I like the 90's font and original dealer surround, the dishevelled R and general water ingress is a persistant MOT advisory. It could be the MOT station being strict (and most likely is considering there's a Saxo down the road with far worse blackening), however for the sake of peace of mind and all that, I'll get a new one made. The rear has already been replaced indicating this has happened before.
All in all, I think this is a nice plucky motor. I'll have it by the end of the week; just got to sort out tax, insurance, and it's going to have an MOT. As part of the deal it's getting the MOT and an oil and filter change which will be something ticked off the list. It has some love scratches and chips here and there, but it drives well, is stiff and controllable, and should make out to be a nice summer project!
I've been under the disco armed with my trusty air needle gun. Found a few holes
This is what's annoying about getting garages to do welding, they use the minimum amount of plate, and surprise! you've got a hole next to where they've plated.
Then there's the weird "scabs", where the surface of the plate has gone but solid underneath.
Except scab on the side next to the fuel tank also has a crack in it.
N another crater on the offside. It's like there's chunks of "not steel" in the steel.
Fortunately apart from the gaping holes it's solid, as my 30 year old migmate only works on the top power setting.
I can do pigeon shite:
The one at the side of the tank was more of a bastard as I don't want to take the tank out, but also don't want to melt it. So I welded a bit, cooled it down with wet towel, repeat. Except when I came to do the top edge I can't get the torch in. Had to get the sealant gun out stick welder, and bend an electrode. Obvs I left the slag on to make it look more pretty and will have to be liberal with the underseal.
Mega pigeon / MOT standard:
Not sure what to do with the crater on the right of the pic above? It withstands 90 psi needle gunning.
Also not sure about wheel arches. There's this spot where the underseal has failed:
I'll grit blast the rust spot and treat, but should I remove all the underseal for if there's more nasties hiding? Or a new coat over the top of all sound* underseal?
Ultimate plan is to fit a new rear chassis, but just haven't got time or facilities. So shonky 3mm plate to hold it together for another year.
This evening I venture forth into hitherto unknown lands (Kirkintilloch) to collect my latest acquisition.
Which, naturally, has issues.
I have purchased my first line of defence.
Which appears to have antigravity properties
More will follow this evening...