Jump to content

JMotor's project car thread.


JMotor

Recommended Posts

More progress. 

Last weekend I wanted to shift cars about again. So kicked the Vectra outside. 

DSC_0113.thumb.JPG.e6153f9b3f6194ca97394b6137cd8824.JPG

Was weird actually seeing outside. Felt happy with the progress so far. 

The GSi wheels I got for it are away to be fixed and powdercoated. Think the colour I've picked will compliment the colour of the car. Didn't plan to have them done so soon. But I'll store them away until the car is painted.

 

Link to comment
Share on other sites

Done a stupid too. 

Trying not to impulse buy stuff (😅). 

But I had a few in the past and wanted another someday. 

DSC_0081.thumb.JPG.3cac85777b9870f233049cfcdf4cf37a.JPG

FB_IMG_1643890267833.thumb.jpg.9b542715ba4b22f0609bd93896ffadaf.jpg

C20XE, but the much later coil pack one. Runs just fine without the typical lifter tick. 

I've pulled the engine and the rolling shell is gone up for sale. 

Got a plan for the ReidTap, once I'm up to date with other cars. 

Nexia got some love too. Oil and filter change. Plus got a used wiper motor. The intermittent function stopped working, so hopefully the replacement will cure that. 

Link to comment
Share on other sites

12 minutes ago, AnnoyingPentium said:

Can't wait to see what unfolds for that wee Nova. Looks like it'll be a right rocket. :D

😅 

DSC_0099.thumb.JPG.f58ce85c3722865cec7fde90c41c76de.JPG

That happened not long after getting it. Got it running and pulled it 😆

The Nova would need a fair few parts to make it a road car again. After seeing what certain parts go for now. It's being moved on. 

Do have another home for the enjin. Plans will happen, but not yet. 

Link to comment
Share on other sites

10 hours ago, AnnoyingPentium said:

If I had the money and the trailer, I'd have been after that wee thing. :)

Aye it be a great way to get good at welding 😆. Ach, it's not the worst one I've seen. But you'd need to be committed to sorting it. 

They are good fun with any engine fired in though. 

Had a Miami Blue Nova years ago. Set of Bilstein coilovers and bigger and wider wheels made such a difference to it. 

I could keep it's 1.0 on the boil with ease. Until I popped the head gasket 😆. Fired a new gasket on and sent it again! 

Link to comment
Share on other sites

14 minutes ago, JMotor said:

They are good fun with any engine fired in though. 

Had a Miami Blue Nova years ago. Set of Bilstein coilovers and bigger and wider wheels made such a difference to it. 

My Dad had a pair of red Novas. Started with his first car, a 5 door 1.2 Merit (still got the rear 1.2 badge) on a D-reg. Had an H-reg 1.4 SR afterwards, which is still on go! :)

Link to comment
Share on other sites

  • 3 weeks later...

Kinda two part update. 

As I didn't just want to fill one post with my nonsense with pictures. 

Moved on with Vectra again. 

Cut the outer off first. Didn't go nuts and chop everything out. 

DSC_0121.thumb.JPG.5063ec4963b59d0f3c904feae1bd6f1a.JPG

OK. It's not as knackered. Still a bit of work required. 

DSC_0139.thumb.JPG.ca9c575f873d47e1fccba3ea34e7bcd4.JPG

This meant I could repair this side instead without hacking huge chunks off. This time I did the repair bit by bit to keep the original profile. 

As I seem to insist on buying repair sections and they rarely fit worth shit. 

Gave the bottom arch corner a bit of a think. Although it was better,  with a good tap of a hammer that was gonna land on the floor. 

DSC_0140.thumb.JPG.97955b85d4729231039e51816c0513b4.JPG

Patched in the last piece of the inner. Just as a point I can work from or too. 

Now. Had wondered about the sill and what it was hiding. 

So I made a decision. 

DSC_0141.thumb.JPG.38d1c87583d6a504113a1f217841cc77.JPG

If I'm going to the effort of making it solid. Then I want to know it IS solid. 

Sill was £45 quid too, yes crap quality. Having fresh metal outweighs the potential issues of rot creeping back out later. 

Link to comment
Share on other sites

Second half. 

While I was sorting the grot. 

The wheels went off to be sorted. 

DSC_0131.thumb.JPG.3914765263013ae3f6a4ebf5f5b2fa35.JPG

Really impressed with the colour I got them back in. 

DSC_0132.thumb.JPG.3b66e1c03e33ebdf4ee7c93edfa9559d.JPG

With the standard "OMG I'VE HAVE TO FIT AT LEAST ONE ON!! 111" shot. 

DSC_0130.thumb.JPG.f3acfd9a68fd45c21fb72029e3b8b773.JPG

Now to stop myself from doing any damage to them. 

Suppose I should of waited before getting them done..... 

 

Nahhhh!! 😂 

Link to comment
Share on other sites

8 minutes ago, AnnoyingPentium said:

Are those GSi wheels?

Yep. 

Ph1 GSi wheels. 

A another friend gave me a GSi brochure and decided I wanted a set for this. Had planned to keep it stock. 

Wheels are only a bolt on thing. So maybe could go back to stock steels with trims again? 

Though I like them and they are technically a period mod.

Like the chav I am, there will be a set of lowering springs going on in the future. 

Link to comment
Share on other sites

8 minutes ago, JMotor said:

Like the chav I am, there will be a set of lowering springs going on in the future. 

Damn right.

8 minutes ago, JMotor said:

A another friend gave me a GSi brochure and decided I wanted a set for this. Had planned to keep it stock. 

I think I have the Irmscher brochure somewhere. For mega chav. 

Link to comment
Share on other sites

28 minutes ago, JMotor said:

I intend to get a correct model year brochure for it. I'll have to look out for a Vectra B Irmscher one too for funsies too. 

I'll see what I've got in the stash... wherever it is. My Grampa goes through a Vauxhall every 3 to 4 years so has or had all the brochures too.

Link to comment
Share on other sites

Weekend on Vectra summed up with the following photos. 

Rigggghttt. What are you hiding!?

17nw0r.jpg.a4ce2309c6a234bf1eeb9f6daf31e366.jpg

*Goes at the inner arch tub with the grinder.*

DSC_0145.thumb.JPG.53d9e8d948713b004c1c8ea1cf4d5b1a.JPG

Oh-Really-Meme.jpg.fc0ece1d219f998e5a25157990ee8e0e.jpg

Fudge! 

Ya fully multi layered pile o' bastard!

That hole goes straight into the inside of the car. So interior out to access all round the area. 

From what I've seen it's a VERY common area for Vectra B's to rot out. 

Link to comment
Share on other sites

  • 3 weeks later...

Haven't touched the Vectra in a few weeks. 

Didn't have the notion for it. 

So went on fitting a new exhaust to the Peugeot. Utter ballache fitting the new cat/downpipe on.

It's a 2.5 inch cat back with a outward rolled tail pipe, instead of the crappy powerflow one that was on it. 

Got a evening shot of the car afterwards. I like the new exhaust as its a subtle touch, suits it better I think? 

DSC_0161.thumb.JPG.6cde90fde519ce4d5e2caec1ae2537f7.JPG

DSC_0162.JPG

Link to comment
Share on other sites

Oh! 

The Nova shell was exchanged for parts and has now buggered off. 

So another shitheap was purchased. 

DSC_0163.thumb.JPG.c2c839aaae043df101f310ea601a12cd.JPG

Another Corsa B. This one's a 1.6 Sport. 

Knew of it's existence. But hadn't asked the lad about it. Until earlier this week. 

It's gonna be bloody handy for parts and such. Also was fitted with a rather rare part. If you know your small block Poxhalls, you'll spot it straight away. 

DSC_0164.thumb.JPG.3bdd710ea11ecccd51b89399c85f5b87.JPG

Link to comment
Share on other sites

  • JMotor changed the title to JMotor's fleet 'o shite. Pug and Vaux Shenanigans
19 minutes ago, JMotor said:

Oh aye. 

This yoke has got the rear spoiler 👍

Oh that's giy exciting then. Reminds me of the Corsa my Mum's mate had, was also a black Sport with what I called the "Robin Hood" on the back. 😂

Link to comment
Share on other sites

12 hours ago, JMotor said:

Oh! 

The Nova shell was exchanged for parts and has now buggered off. 

So another shitheap was purchased. 

DSC_0163.thumb.JPG.c2c839aaae043df101f310ea601a12cd.JPG

Another Corsa B. This one's a 1.6 Sport. 

Knew of it's existence. But hadn't asked the lad about it. Until earlier this week. 

It's gonna be bloody handy for parts and such. Also was fitted with a rather rare part. If you know your small block Poxhalls, you'll spot it straight away. 

DSC_0164.thumb.JPG.3bdd710ea11ecccd51b89399c85f5b87.JPG

Inlet manifold?

Link to comment
Share on other sites

  • 3 weeks later...

Kinda crappy update. 

Back on to the Vectra. Got the want to do it again. 

DSC_0184.thumb.JPG.9482cd47b6e52d9714c5f83ea1ff6a0c.JPG

Aye, I'm getting baws deep again.

Was worried about how much rust there was. Cut back more again. 

Afterward a scrub with the wire wheel and dose of Rust Remover acid, made it look less scary. 

Shouldn't be that far away from getting some fresh steel back in. 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...