Jump to content

JMotor's Motors. Put that bloody grinder down FFS!


Recommended Posts

Took a shot at the 406 today. 

It's in need of MOT. Then it can be moved on. 

Few issues to sort first. Front drivers spring is touching the inner wing. Took the whole strut out and then apart to find nothing out of place. Eh!? 

Meh! I'll order a spring as it's a bit crusty. Then reassemble. It's had a top mount at some point and it's not had the top hat put back on correctly. 

Plus the brake caliper sliders are stuck. So think a strip and clean is in order too. Brakes look really good otherwise. 

Hopefully it will pass without too much trouble after that. 

Didn't take any pics, cause I wanted to get on with it. 

Link to post
Share on other sites

Did fixor on 406.

Drivers front strut is back in with new spring. Now clears the inner wing. Yay. Freed off front brake sliders too. Double Yay!! 

But to restore the balance. 

Daewoo has broken another spring. Front drinkers side. The captain side ones are both still fine. 

Will price something up or buy a set. Price will dictate that. 

The above, isn't really news worthy as I realise this is AutoShite. 

It's the daily routine for shit to break, right? 

Link to post
Share on other sites
  • 2 weeks later...

Did purchases. 

Because I was overthinking an issue. Was about ready to replace the wheels on the 306 due to an wobble at speed. 

Dawned on me. Had I actually bothered to properly look to see if it was just the wheels?

Straight away found the drivers rear wheel bearing was actually knackered. Well that won't help the job. 

Also good opportunity to fit a pair of new dustshields too. 

Ended up getting full rear hub kits and genuine dustshields. 

406 is coming along nicely too. Just need to replace the dry rotted tyres and we are hopefully ready to chance a test on it. 

Gave it a wash too! 

 

sketch-1618688323276.png

Link to post
Share on other sites
  • 2 weeks later...

Results are in on the 406...

Aw, you durty bastid! 

I'll have a proper look later. Most of the issues seem to be some grot on the sills (typical 406 issue) and wonder how seized that valve is?

 

Bridging the thing should of been the smart choice.

Capture.JPG

Link to post
Share on other sites
  • JMotor changed the title to JMotor's Motors. Put that bloody grinder down FFS!

Right! 

Whip the 406 into the workshop. Tackle the jobs with aplomb! 

So tackle the hardest job first. Then everything else is easy! Right!? 

WRONG! 

As you can see. It's never a just a small hole. 

Then the extent of the grot didn't stop there. It's had your typical MOT welding repairs. Slap tin over the shit and tack on and cover with industry standard underseal. 

Even the near 2mm thick plate for the Jacking point was but a memory now. 

Gad damn it! 

Didn't even bother investigating the passenger side. As its the exact same. 

DSC_0243.JPG

DSC_0246.JPG

DSC_0247.JPG

DSC_0248.JPG

Link to post
Share on other sites

Most of that merde on the floor came from when I took the outer skin off. Think it was the sill membrane at one point. 

So next logical plan... 

Strip as much good stuff off and bin remains. 

Link to post
Share on other sites

Back onto the 306.

Discovered the front passenger wheel bearing was buggered. 

I had previously checked this a while back, due to my earlier mentioned wheel wobble issue.

Couldn't find any play in it. So left it at that. Until I spun the wheel when checking again. It was very grumbly. 

To save immobilising the car. I got another hub and changed the bearing in it.

Changed the hub over and much better now. 

A quick test drive later reminded me how much fun they were to drive. 

Still a couple of niggles and the mismatched painted wheels needs sorting out. But that'll come in time. 

DSC_0241.JPG

DSC_0242.JPG

Link to post
Share on other sites
  • 2 weeks later...

Och! Having more than one project is a ballache!! 

Spotted a small hole, behind the rear shocker on the Corsa.

 DSC_0261.thumb.JPG.aab8242643bb34debba62e1652fb9e73.JPG

Ugh! It's never "just" a small hole is it!? 

Rear axle, fuel tank and filler neck out. Brake pipes? Aye fuck ye! Tin snips through the whoores! 

Spinny wire wheel of pure bastard put to work. Then the Spinny discy pile of bastard afterwards. 

DSC_0272.thumb.JPG.e8358748c6c4261d7113c16088f052a1.JPG

Hmmm.... 

OK, that's not totally horrible. Onwards!

DSC_0274.thumb.JPG.3e6a2834d720cda399343808e8b2b555.JPG

So. One new piece of steel let in. Bashed fuck out of the steel to make it. 

Now! Let's sort out that flange on the chassis leg! Due to the shapes. I went for small patches. 

Then cut more of the strut tower out. 

DSC_0276.thumb.JPG.5c23d051e00ff76c18ca649aee998a93.JPG

Then left it at that. With a splash of weld thru just to give the fresh steel a coat of something. 

I'll have another go at it next weekend. 

Link to post
Share on other sites

Thanks 🙂.

Yeah, it's best left alone if you can. 

But it's no wonder to why it rots out when you get dug into it. 

That area is about two to three layers of steel in places. With those plates only being spot welded. Twenty years of mud and moisture just makes a mess. 

Link to post
Share on other sites

Never thought I'd say it, but its a shitty Vauxhall trait, as you know. Double or triple seams just fatten up and self destruct. All mine did this at some point.

Although there's some surface rust under the 75, the seams have remained watertight so a quick rub down and vactan saw it good.

I'm well tired of it!

 

 

Link to post
Share on other sites
  • 4 weeks later...

Hadn't been at the Corsa for a little while. 

Typical finding other things to do. 

But when I felt like it, I just did a little bit at a time. 

DSC_0294.thumb.JPG.55a05797a3a059457841ac74d81beb69.JPG

Yes, it's not pretty. But I wanted strength over some weld pRon. 

Quick tickle with the flappy disc and it looks more presentable. Then a quick dust of weld thru just to give the lot a coat over. 

DSC_0304.thumb.JPG.0bda6d39d7143657026699e65539ba46.JPG

I still have to finish this. Then put another layer over to get it back to what GM had done. 

Link to post
Share on other sites

Nexia update. 

Been using it as a weekend runabout. 

Quite enjoy driving it. It's been doing me proud for just car duties.  

DSC_0309.thumb.JPG.01fee4557cca660a0cc7fac3b7c77687.JPG

Shame T'other side is a bit rough.

DSC_0307.thumb.JPG.74246f38fb458e4b5e0c37c6f3afbb9a.JPG

That's the biggest problem with the car. Certain specific Nexia parts are near impossible to find. That rear passenger door being one of those parts. Can only find one for sale, helpfully in the wrong colour. Might get it anyway and live with it or repaint it. Or not bother.

Also have a few service parts to fit, as I hope to head down to the VBOA show next month in it (well if it's not postponed again).  So that'll be today's task.

Link to post
Share on other sites

Holy moly! 

I actually got some jobs done on the Woo.

New rotor arm and dizzy cap has actually returned some useful get up and go. It was the original parts I pulled off! So not bad for being on since 1997!

Then on with some front brakes. Even think they were the original ones too. DSC_0312.thumb.JPG.3b513f29b393d2a93b461bf300d4ba37.JPG

Reason the new disc is rusty, it's due to me buying new old stock GM/Vauxhall gear. Bit of roost ain't gonna bother me. 

Was surprised to find out these Twin cam Nexias run the same brakes as the bigger engined Vauxhalls. Or as known in the Vauxhall modifying circles as 'Valver' brakes. 

The standard choice for upgrading your Corsa or Nova. Back in the day it was near impossible to not find a set in the scrappies. 

They still give some decent pedal feel, will still stop you quite quickly and mostly..... 

They're cheap for pads and discs! Brand new GM brand pads and discs came in about £35 delivered. 

Handy when three of your fleet has them. 

DSC_0311.thumb.JPG.8d8256d66fb319a04b3456e50fede2f2.JPG

Light work was made of the job. Done that many of them it's near muscle memory now. 

I couldn't get over how clean this wee car was too! 

It's still got fucking brake dustshelds for fucks sake!! 

It even came apart like a much younger car too. Such a joy. 

DSC_0310.thumb.JPG.238c7d585018347e84b229a096019b17.JPG

Still need to replace some stuff yet. Just service stuff like spark plugs, which after pulling one out. I was more than happy with its light brown colour. 

Derek at Vice grip was right! You can tell a lot from your engine from how the plugs are. 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...