The Moog Posted September 22, 2020 Share Posted September 22, 2020 I will need to have a look at what wheels I have got. Definitely got a set of mini steels and 14inch daisy wheels. If you want suspension then talk to Mr Monkey - we have got bucket loads between us. You are more than welcome to my gearbox as I just keep tripping over it. If you wanted to arrange a time I am sure Moog and Monkeys fitting services might be available. Link to comment Share on other sites More sharing options...
hairnet Posted September 22, 2020 Author Share Posted September 22, 2020 wont be till end of october...................... Link to comment Share on other sites More sharing options...
hairnet Posted October 6, 2020 Author Share Posted October 6, 2020 so the mid life crisis man (who me) went shappin in it and because it rained i went to work in it - im such an old fart - but then if id only had the bike id have got wet anyway - its nice to have the choice booking a holiday for it but i cant decide where to take it oh and scoped out a place that fits hoods as it needs one and theyre very local (bonus) Six-cylinder, paulplom and Cavcraft 3 Link to comment Share on other sites More sharing options...
hairnet Posted October 18, 2020 Author Share Posted October 18, 2020 I need a sit down Epic phail as can't undo bolts No leverage for rear ones @NorthernMonkey are you a good nut fumbler also fail on wheel nuts - unsure these are right - the left one is the ones I've bought they are listed for the car pumped tyres up even tho they looked like they could do with a bit they were ok Link to comment Share on other sites More sharing options...
hairnet Posted October 23, 2020 Author Share Posted October 23, 2020 Due to this No hairdresser action for at least a week Ffs Mrs6C, Cavcraft and Low Horatio gearbox 3 Link to comment Share on other sites More sharing options...
chaseracer Posted October 23, 2020 Share Posted October 23, 2020 Are you broken? 🙁 Link to comment Share on other sites More sharing options...
hairnet Posted October 23, 2020 Author Share Posted October 23, 2020 tweaked back - ok once stood but need stick to stand up or sit down mooseda far too low to get in and out upset as was supposed to be going away and possibly putting a hood on it chaseracer 1 Link to comment Share on other sites More sharing options...
Cavcraft Posted October 23, 2020 Share Posted October 23, 2020 1 hour ago, chaseracer said: Are you broken? 🙁 No, but we are reading his posts 🤪 Link to comment Share on other sites More sharing options...
hairnet Posted October 28, 2020 Author Share Posted October 28, 2020 Ffs Due to omg @PhilAstyle weather due tomorrow Cos cba drying it out for use Friday This now and fast and loud PhilA 1 Link to comment Share on other sites More sharing options...
1duck Posted October 29, 2020 Share Posted October 29, 2020 How much is a new hood for one of these, mine really could do with one, I was even considering getting one off Amazon and diying it. Link to comment Share on other sites More sharing options...
hairnet Posted October 29, 2020 Author Share Posted October 29, 2020 less than 200 cost that again to fit fk doing it diy Link to comment Share on other sites More sharing options...
SmokinWaffle Posted October 29, 2020 Share Posted October 29, 2020 10 minutes ago, hairnet said: less than 200 cost that again to fit fk doing it diy Can confirm it is literally the worst job ever to fit one of these yourself. I just sold my hardtop. Shame. Link to comment Share on other sites More sharing options...
hairnet Posted October 29, 2020 Author Share Posted October 29, 2020 breakdown cover bought rock and roll Link to comment Share on other sites More sharing options...
1duck Posted October 30, 2020 Share Posted October 30, 2020 Hmm watched a video on YouTube didn't seem that hard, but I'll take everyone's word on it. 😅 Link to comment Share on other sites More sharing options...
Jamie Posted October 30, 2020 Share Posted October 30, 2020 i've changed a soft top on an NA & NB, never thought it was a bad job at all. gm 1 Link to comment Share on other sites More sharing options...
New POD Posted October 30, 2020 Share Posted October 30, 2020 2 hours ago, jamiechod said: i've changed a soft top on an NA & NB, never thought it was a bad job at all. I did the roof on our Mk1. Took all day (6 hrs) because I fitted one with a glass rear window from mazmania in knutsford. This required drilling the frame and pop riveting webbing straps to the frame. There was 1 stubborn bolt which I struggled to remove, which wasted 2 hours. Also my electric screw driver gave up. Finally when I thought I'd nearly finished it wouldn't close. After phoning the MD of mazmania, who laughed on the phone, it became clear that I'm a Muppet. On loosening the bolts/ screws at the back of the car, the roof was able to fit. And then I could tighten them up. theshadow and spartacus 2 Link to comment Share on other sites More sharing options...
New POD Posted October 30, 2020 Share Posted October 30, 2020 3 hours ago, 1duck said: Hmm watched a video on YouTube didn't seem that hard, but I'll take everyone's word on it. 😅 Mazmania had a free DVD which took me three hours to watch. The actual paper instructions were really shite. I reckon if I was doing them every week I could get it down to 2 hours. 1duck 1 Link to comment Share on other sites More sharing options...
hairnet Posted October 30, 2020 Author Share Posted October 30, 2020 Smol japanese car needs a wash Link to comment Share on other sites More sharing options...
hairnet Posted October 30, 2020 Author Share Posted October 30, 2020 can i ask @paulplomor @gm a question the wipers - can you get a flick wipe for these? ya know pull the stalk and it washes then does one flick is it a relay swap thing or cant you do it? Link to comment Share on other sites More sharing options...
xtriple Posted October 30, 2020 Share Posted October 30, 2020 I believe you can you need a wiper stalk from an RX8. Link to comment Share on other sites More sharing options...
Forty45 Posted October 30, 2020 Share Posted October 30, 2020 Yes, @hairnetthe RX8 is usually the more expensive route though. Mazda 6 also has the same stalk. Watch out you don't get one for an estate. I bought a new one from China on eBay last month. About £15. Almost identical to the other stalk apart from the signs being slightly duller. The intermittent relay makes a noticeable click, but for brand new I can live with that. Very easy to fit. Link to comment Share on other sites More sharing options...
hairnet Posted October 30, 2020 Author Share Posted October 30, 2020 i can be in fareham on tuesday.............. Link to comment Share on other sites More sharing options...
Forty45 Posted October 30, 2020 Share Posted October 30, 2020 Don't expect too much of it!! Link to comment Share on other sites More sharing options...
gm Posted October 30, 2020 Share Posted October 30, 2020 1 hour ago, xtriple said: I believe you can you need a wiper stalk from an RX8. Is that not the mk3 model that shares parts with the rx8 ? Mr Hairnet has a mk2 which has more in common with the mk1. Is it a "flick to wipe once" or a "variable intermittent" wipe that you are after ? Flick is just pull instead of push on the stalk, intermittent wipe would be a whole can of electrical worms. Link to comment Share on other sites More sharing options...
hairnet Posted October 30, 2020 Author Share Posted October 30, 2020 it has intermittent i want it to wash as you pull for one wipe Link to comment Share on other sites More sharing options...
Forty45 Posted October 31, 2020 Share Posted October 31, 2020 Okay, I was talking about a MK3. Link to comment Share on other sites More sharing options...
hairnet Posted October 31, 2020 Author Share Posted October 31, 2020 Uh oh Boat Six-cylinder 1 Link to comment Share on other sites More sharing options...
hairnet Posted October 31, 2020 Author Share Posted October 31, 2020 This is not stena to Gothenburg Six-cylinder and The Moog 2 Link to comment Share on other sites More sharing options...
Forty45 Posted October 31, 2020 Share Posted October 31, 2020 En route to the Pile of Shite?? Link to comment Share on other sites More sharing options...
hairnet Posted October 31, 2020 Author Share Posted October 31, 2020 was the mazda of [s]sex[/s] rust needs fixing i cannot fix it until tuesday unless i find something monday fuxake = thought j tin was reliable @Marina door handles fecker :D Marina door handles 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now