sutty2006 Posted June 22, 2021 Author Share Posted June 22, 2021 Managed it on my computer. No idea why its file is a different size... mantarun1.mp4 Crackers, tooSavvy, PhilA and 9 others 12 Link to comment Share on other sites More sharing options...
dome Posted June 22, 2021 Share Posted June 22, 2021 Excellent! Bet that feels good after all this time? sutty2006 1 Link to comment Share on other sites More sharing options...
sutty2006 Posted June 22, 2021 Author Share Posted June 22, 2021 12 minutes ago, dome said: Excellent! Bet that feels good after all this time? feels awesome. Just need to find a set of coolant hoses now and I can get it cooled and ran in. Still plenty to do! tooSavvy, Burnside and dome 3 Link to comment Share on other sites More sharing options...
sutty2006 Posted June 28, 2021 Author Share Posted June 28, 2021 Not a lot happening at the moment. I found what looks like a coupe exhaust in my shed, centre and back box. Think I saved this off the auto coupe I broke years ago. It’s a tad rusty, but nothing that can’t be welded up. Can’t get a nos exhaust, mainly sportex systems on eBay. And I’m not paying Powerflow close to 500 for a new exhaust. So I’m going to restore this one as best I can. as you can see, some bits are rusty but the whole thing seams to clean up well with a wire wheel on a 240v drill. Then I realised my welder is up my unit. Bugger. Oh well. hoping to go up tonight to do a couple of jobs, retrieve the welder and take the fuel tank out and bring it home, a guy I know can clean and test them. Burnside and JMotor 2 Link to comment Share on other sites More sharing options...
Snake Charmer Posted June 28, 2021 Share Posted June 28, 2021 2 3/8" twin box system with downpipes would complement the 32/36 carb nicely. sutty2006 1 Link to comment Share on other sites More sharing options...
sutty2006 Posted June 28, 2021 Author Share Posted June 28, 2021 They do sound good these 4 banger CIH engines I must admit! Link to comment Share on other sites More sharing options...
dome Posted June 28, 2021 Share Posted June 28, 2021 The exhaust on my coupe isn't terrible, it does have a wee hole in it though. If it's of use let me know Link to comment Share on other sites More sharing options...
Snake Charmer Posted June 28, 2021 Share Posted June 28, 2021 3 hours ago, sutty2006 said: They do sound good these 4 banger CIH engines I must admit! If my memory serves me correctly, a Weber, filter and twin downpipes with 2" twin box system was around 110hp. Link to comment Share on other sites More sharing options...
sutty2006 Posted June 28, 2021 Author Share Posted June 28, 2021 So a little work done tonight. Fitted the clocks. All good. Then found a spare Rev counter, balls. Not taking that out again, fuck it. It can stay a spare for now. fitted radiator and top hose, just need heater hoses and a bottom hose then I can put some coolant in it! also put a P clip round the fuel pipe to keep it secure. Taken fuel tank out so I can get it cleaned out. Breather pipes all shot so that can be done at the same time. Snake Charmer, dome, Isopon and 2 others 5 Link to comment Share on other sites More sharing options...
sutty2006 Posted June 29, 2021 Author Share Posted June 29, 2021 So last night’s dig through the boot came up trumps. A NOS Walker back box, identical to the one fitted (also Walker!) so only need to fix the centre box now. I have a friend that runs a fuel tank/repair/radiator repair business. He’s volunteering to clean and test the fuel tank for me one Saturday…. Thought I’d pull the level sensor out, I can start cleaning the gunk out myself. There’s a thick layer of gunk at the bottom! then all the breather pipes can be replaced as they’ve gone rock hard and fallen off. Snake Charmer, dome, Burnside and 2 others 4 1 Link to comment Share on other sites More sharing options...
sutty2006 Posted June 29, 2021 Author Share Posted June 29, 2021 So I’ve filled it with TFR, wheel cleaner and water. Jet washed the living shit out of the inside of the tank and left it for a few hours half full of water. Then drained it out. Made a new gasket out of fuel proof rubber for the level sender. Made it from card first lovely. and fitted the breather hose, but it turns out it’s a foot too short. That’s 2 metres of breather hose and I’m a short a foot lol. also binned the old silencer. Wanted to keep it and fix it up as a spare but it fell to bits hammering it off. Crackers and Burnside 2 Link to comment Share on other sites More sharing options...
Snake Charmer Posted June 30, 2021 Share Posted June 30, 2021 Can you re-use the bends and buy boxes? My V8 system was designed to use an off the shelf 2 3/8" rally system, they came with a Cherry Bomb style bullet rear silencer and a large oval mid box. Sounded great, but when the boxes rotted I retained the bends and added new silencers. This didn't go to plan, I ordered the biggest and longest back box to fit in the space and an oval centre box. All done the old way (old school) from magazines and the bibles (catalogues) over the phone. My mistake was Ye Olde pipe/tube measurement conundrum, I had a 2 3/8" system which is 2 1/4" bore so I ordered 2 1/2" boxes thinking they would be 2 3/8" bore and slip nicely over the existing tubing. Wrong! They were 2 1/2" bore so I had great fun sleeving them and as they were straight through expected them to be noisy. Far from it, they were really good, sounded excellent and made the car much smoother. Link to comment Share on other sites More sharing options...
sutty2006 Posted July 8, 2021 Author Share Posted July 8, 2021 Small amount done on this today. Had to fix the water coming up through the rocker bolt thread hole. So I cut about 3/4mm off the end of a bolt, put a slit into it and cleaned the hole. sealed it with flange sealant. Then sent it home. then I re did the timing and now it runs pretty perfect. Datsuncog, Snake Charmer, adw1977 and 5 others 8 Link to comment Share on other sites More sharing options...
Crackers Posted July 8, 2021 Share Posted July 8, 2021 On 29/06/2021 at 22:00, sutty2006 said: That’s 2 metres of breather hose and I’m a short a foot lol That's what you can expect when you measure metric hose with an imperial tape measure. JMotor, Rocket88 and sutty2006 1 2 Link to comment Share on other sites More sharing options...
Snake Charmer Posted July 8, 2021 Share Posted July 8, 2021 Coming along nicely. 👍 Link to comment Share on other sites More sharing options...
sutty2006 Posted July 16, 2021 Author Share Posted July 16, 2021 More work done today. Mrs sutty took me up to the unit and left me there until this evening. Thought nows a good time to get the rear seats in place, but what’s that at the bottom of the inner rear arches? Rust? Never! Oh……. bummer! Same both sides. Better sort that out now. Start on the other side then. cut out the grotty bits. There is a seat belt mount here, which has a bung in it. I decided to cut that out and leave it out, as a 76 car doesn’t need rear seat belts. new section in place I hate underseal but onwards we go! made it a bit stronger then used the hammered effect underseal…. Bit of stone chip on that and it’ll be grand as owt. view from inside, also now sealed. mrs sutty suggested I fit rear seat belts…….. thanks. Good job I kept these rear end raised up for now. I can sort out the rear brake pipes and fuel pipes now. Dyslexic Viking, Snake Charmer, Isopon and 2 others 5 Link to comment Share on other sites More sharing options...
sutty2006 Posted July 16, 2021 Author Share Posted July 16, 2021 Also got the rear lights working. Including hazards which you can see currently in the “off” part of cycle. and refreshed the coil. The black box (transducer?) is known to have a heat sink paste between it and the body, so that’s been cleaned and reapplied. and there were no seatbelts, so that’s had to be rectified with some seat belts I took out of one I broke over 10 years ago. Glad I kept those! Dyslexic Viking, Snake Charmer and Tickman 3 Link to comment Share on other sites More sharing options...
sutty2006 Posted August 10, 2021 Author Share Posted August 10, 2021 Not done a lot on this recently. Just been too busy now I’ve got my driving licence back. Pain in the arse. Managed an hour on it tonight before I go back to work tomorrow. fitted the early rocker cover that I had powder coated (after cleaning all the sand out of it!) found a vacuum advance pipe at home so that’s been fitted. And cleaned/fitted the heater hoses donated by Dome of this parish. One may need changing as it’s a bit meh but for now it’s good enough to test the matrix. just need a nice filler cap to complement that engine now. Six-cylinder, dome, Dyslexic Viking and 1 other 4 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now