Jump to content

1976 Opel Manta coupe. A long haul project. Engine in!


Recommended Posts

On 3/16/2021 at 11:36 PM, Barry Cade said:

Wondered if anyone else knew,  seemed to be folklore in Opel circles.

Many years back, someone was restoring a Manta "A". 1973ish. Needed a front valance, so went to his local Vauxhall/Opel dealer. Dealer did a part search and found 3 left in Europe, as they had been out of production for many years.. chap says, get me all 3. I'll  keep a spare, and someone in the club will surely appreciate one.

Dealer puts an order in to Europe parts network, Europe parts network computer sees it as a fast moving part, and sends a message to panel manufacturer to keep up with demand and they press 500 new ones.  There's probably 495 sitting gathering dust somewhere.

 

Might be shite, but heard the story a few times.  Its the only new panel you can get for an early Manta so I've heard.. just wondered if anyone else heard the same story..

I asked my friend Paul about the Manta A valence panels and this was his reply:

Mike, this is what really happened. I went into Shannon’s Vauxhall/Opel dealer in Dorchester about 1991 and ordered a front valance and other stuff some of which came up as no longer serviced (NLS). I ask the storeman who I knew well how many valances were left he didn’t have that info back in them days. However he gave me a contact number for a guy at V’hall Luton who would know. I contacted Ted Horn at Luton who told me there was around 20 in their store and they wouldn’t be importing any more from Opel. I ordered the 20 from Luton through Shannon’s for £8 each plus 10% for Shannon’s. A month or so later Ted Horn calls me and asks if I would like another 150 as their stock computer had ordered them from Opel as no one had input the do not re-stock info. I bought them at the same price and sold them to the Dutch Opel Manta club as the uk club weren’t interested. Ted told me if I didn’t buy them they would have been scrapped.

Link to post
Share on other sites

It's almost the exact opposite of trying to get genuine parts for the omega. Urgent rear brake pins.

Go into dealer.  None in stock. Can you get them. No. Why not? Nobody buys them? Why not? Because we don't have them in stock, so they've discontinued them. 

But if you had them in stock, you'd sell some? Yes.  And they wouldn't be discontinued? No. Can you actually order one? No. 

The Vauxhall parts department in Derby, would at least try to give you the part number so you could try Saab, Opel, Holden, Cadillac and Chevy dealers in other countries. 

Link to post
Share on other sites
3 hours ago, Snake Charmer said:

I asked my friend Paul about the Manta A valence panels and this was his reply:

Mike, this is what really happened. I went into Shannon’s Vauxhall/Opel dealer in Dorchester about 1991 and ordered a front valance and other stuff some of which came up as no longer serviced (NLS). I ask the storeman who I knew well how many valances were left he didn’t have that info back in them days. However he gave me a contact number for a guy at V’hall Luton who would know. I contacted Ted Horn at Luton who told me there was around 20 in their store and they wouldn’t be importing any more from Opel. I ordered the 20 from Luton through Shannon’s for £8 each plus 10% for Shannon’s. A month or so later Ted Horn calls me and asks if I would like another 150 as their stock computer had ordered them from Opel as no one had input the do not re-stock info. I bought them at the same price and sold them to the Dutch Opel Manta club as the uk club weren’t interested. Ted told me if I didn’t buy them they would have been scrapped.

😆 thanks for that! I'd heard the story years ago and wasn't sure if it was just Manta folklore. 

Link to post
Share on other sites

More carb work done today. Choke flaps cleaned and polished. 
 

15DDBCD3-3264-487F-AB6B-418B6F5DAF43.thumb.jpeg.9d5e0db0696ce5bd93e0c8e6e11f0b2a.jpeg

 

left is how they both were, right Is cleaned. 
 

55E2A83A-ECDA-4F83-B527-F8BFAAFC1437.thumb.jpeg.3d9f19d98e2e08d9331398009bce7395.jpeg

 

Very nice. 
 

and now it’s back on, not for long as I need 3x more manifold carb gaskets as the repair kit only came with one. 
 

9171B032-382B-4397-8179-3BDF6BB0EF0A.thumb.jpeg.a5594cb27becc1e6a30d220ba3eac8c3.jpeg

Link to post
Share on other sites

It’s been a monumental day today. I don’t know how long it’s been since this car had an engine in it. Minimum 13 years, maximum 31 years. Who knows. But after all this time it now has a 2.0 sat in the engine bay. My friend borrowed his dads car and trailer and we got the engine up to my unit tonight. And proceeded to get it chucked in. Not before putting the repainted sump in place with a new gasket kit. Tomorrow evening the wife will be taking me up to the unit so I can get the gearbox fitted. And I’ve no idea why my writing has a white background. 
 

72EB4203-A9D0-4155-AFAE-83098BD13358.thumb.jpeg.aa5cdfc0f5f676bdc68ac2e90e00886e.jpeg

ECBA51DE-EA78-4355-B54E-1A5E745147D5.thumb.jpeg.ed1154aa393aada11d5682ee03c488f6.jpeg

EBDAE476-5245-4B72-8E0A-756274EB67B2.thumb.jpeg.af9e80bbd9839b0dd0e2d5e3713a845f.jpeg

then I used the discovery to winch it up onto the ramps to make it easier for me to get the gearbox in place. 
 

0F5A6387-3AE0-4ED1-BAB7-01D4576160B5.thumb.jpeg.051140fd513fb678b5d7595da62af960.jpeg

Link to post
Share on other sites
  • sutty2006 changed the title to 1976 Opel Manta coupe. A long haul project. Engine in!
9 hours ago, junkyarddog said:

Would it not have been a bit easier for you to bolt the gearbox on first?

Then fit them as a unit,fitting a gearbox from underneath ain't a lot of fun.

Not in this case. The CIH engine has no lifting points at all. I have a balancer but there’s no way of suitably attaching it to the engine. I had one chain through the engine mounts then another chain bolted to the bell housing to give me a stable angle. The 4 speed is a light gearbox, I’ve taken 5 speeds in and out this way so I’m no stranger to lying on my back with the gearbox on my chest! 

Link to post
Share on other sites
47 minutes ago, sutty2006 said:

Slightly more done tonight. Gearbox fitted. Took the old remains of gear lever off and fitted a spare from inside the boot... there’s 2 in there....... engine now sitting how it’s supposed to. 
 

 

B8D177A7-BD2D-49D6-9514-53E6934054E8.jpeg

B0CAE72F-F0A4-4506-8B87-AB87F6FB4A0E.jpeg

DD175322-4546-43EC-8A3C-21C78A6D935D.jpeg

Blimey @sutty2006 I would eat my dinner off the first pic. Well, obviously I couldn't because it's the wrong way up and, erm, gravity and stuff but you know

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...