Jump to content

Daihatsu Fourtrak Project - Gone full frontal!


rickvw72
 Share

Recommended Posts

Hi all, I’m going to try to keep this updated as a diary of work done on my old Fourtrak. 
I bought this a few years ago but have only recently got going on it properly, with several other projects on the go, times been scarce.

Ill start with the main job, the rear crossmember. When I bought the truck this tube had snapped on the drivers side. This ruptured the brake pipes, and ruined all the already tired suspension bushes.

So, out with the crossmember...

The original is round tube, the new 3mm wall box section, it actually holds the anti tramp bars. 

Yes the Fourtrak has a 5 linked rear suspension, and an LSD. Because race car!

I didn’t take many pics at this time, so I’m trying to improve this and maybe a thread will motivate me to document it. 

 

87AE4CD6-4F0C-48E0-BAD7-048FE0564B10.jpeg

ABD9DAF6-1B35-4EE7-8475-5F6F23786897.jpeg

1D4AE3C7-5286-455E-AC4E-5EA6A30CABC4.png

Link to comment
Share on other sites

To the front of the spring mount you’ll see a hole, to access the crossmember.

This was next up for repair. Cut out, welded and ground back, then Zinc primed. Inside all the repairs Is some zinc spray too.

About now was when I started to scrape all the barnacles, manure, rust and loose sealer from the underside. As the underside cleaned up, and more and more holes were sorted and primed, progress was being made.

Ill trawl my old pics so you can see what this looked like originally, there was a farmyard worth of shite on this, mud sever inches deep at this point.

Bits removed are this point- rear axle, rear suspension arms and tramp bars, under guards, prop, fuel tank and filler neck Shiz, rear bumpers, literally the worlds most hardcore tow bar, rear bumpers, Entire interior.

Theres a theme developing. If it’s made of metal, it needs welding. 

8C2A356C-0BAD-4A3A-9923-6FBF86197BC4.jpeg

C2C852A0-F3AC-497E-98BF-439762A1B739.jpeg

D180DD03-4028-4CD9-AC67-5CA87AB18AD6.jpeg

Link to comment
Share on other sites

Mines not been tested in a few years, but there’s many still going on farms. 

It’d be interesting to find out for sure, but I think they’d be more survivors on sorn but used off-road or registered limited use, than there is taxed - tested.

Most the farm ones will never see another MoT, this one should though! 
 

Link to comment
Share on other sites

My uncle bought one on a v plate brand new. I hated it, he loved it.

Years later a mate had one and loved it, he said it would pull anything. It literally snapped in half one day though. He sold it for very good money.

Owners absolutely love them.

 

Link to comment
Share on other sites

Okay, so as I’m ahead of progress to where this thread is, I can update further.

Fuel tank - this has weeping seems, and needs a look at. Any shiters experienced with a tank sealer? 
 

The next work done was the rear trailing arms, these had bushes replaced with poly, and the spring seats were repaired, before a coat of rust oleum combi colour. 
 

All the rust was ground away with various wire wheel grinder wheels, and rust converted with Bilt Hamber Hydrate 80. This stuff is immense.

 

6C7352AE-21F4-463F-9E6A-153FEA630F8C.jpeg

42BA4C3C-10A0-42AD-86DC-F81FB389EE83.jpeg

46F5782B-A77C-4700-8527-AE669E80707D.jpeg

F5A8A345-3A1E-45D4-8970-23F4338EF408.jpeg

8A83908D-7F0F-433F-A946-01A0D57C1C70.jpeg

Link to comment
Share on other sites

With the rear chassis welded, and the arms done, the rear axle could go back in to make it roll. 
 

This was fitted but not fully done up. 
The plan is to remove it again to treat the whole underside with an underseal or similar. 
 

Before this there’s other rust to sort, you can see some of the treats in store in the arches from these pics already. 

Close up pics to come, when I can bare to look at them myself! 
 

So, for the first time in a while, the beast was on four wheels, and was movable again.

863CA737-3B0C-4CE4-A739-A992172B7FF6.jpeg

03A89983-C964-4491-A9BB-035EB9F065C3.jpeg

929816CE-3115-4712-806C-F583F6DA6535.jpeg

D35056D1-3B64-4D86-BAAD-DBE4D00F736C.jpeg

Link to comment
Share on other sites

2 hours ago, rickvw72 said:

Fuel tank - this has weeping seems, and needs a look at. Any shiters experienced with a tank sealer? 

Yep, I used the kit available that cleans, treats and seals the tank.

It was really straightforward and easy enough to do methodically.

Can't remember the name but it will come up in a search. They seem to be aimed at motorbikes more than cars.

Link to comment
Share on other sites

'Kinell.  Good job it's got a separate chassis or it would have folded in half by now...

I've had three Fourtraks, two LWB petrols and a SWB diesel, but they were all Mk1s with beam axles and cart springs.  I did drive a TDS Independent once and was quite impressed.  Haven't seen an MOT'd one for sale for a while though.

Link to comment
Share on other sites

  • 2 weeks later...

Cheers for the fuel tank experiences.

Progress is slow this week, as I’ve got two of my fleet mot tested and cleaned up ready for sale.

I also bought another car. Taking me to a nice even ten. Oops. 
 

Turned the beast around though, next jobs are to replace the rear body mount, and rebuild the floor and inner arch. When this is done I reckon I’ll be about a quarter of the way through welding it up! 
 

1B6A0010-C902-4002-B3EE-A8B370FFD7E0.thumb.jpeg.e59c2746ae3bc54b7cdc2fe19ec69f8d.jpeg
 

I do love this monstrosity! Maybe too much. It’s rather fucked.


255D7324-7F0F-4051-BF88-67BFE7D5235B.thumb.jpeg.ee4afd3aba96c7762c61f6468685bcfe.jpeg

Link to comment
Share on other sites

47 minutes ago, MJK 24 said:

Is T reg considered to be a late model?

Separately, were Daihatsu part of Toyota or am I making that up?!

I think they made them too 2002, which makes mine fairly late.

Im pretty sure Daihatsu is a subsidiary of Toyota, same way as is Lexus.

Ive been told that the Fourtrak chassis is almost a land cruiser 70 or 80. I wonder how similar the mechanicals are, for example the Land Cruiser has a 4.2 straight six, this a 2.8 straight  four.

Link to comment
Share on other sites

  • 4 months later...

Realistically last update for the year, thought after 5 months it’s time, and threads that go cold with this sort of job often seem like they got abandoned.

Truth being, I work In education, and since last update, work got a bit mental.. 

097ACC00-E441-4C11-B807-0045ADD8457C.thumb.jpeg.1e663a01ec499c689d4311be978b825a.jpegBack to the Fourtrak. 
 

More and more lumps of metal have come out, sound metal found eventually though. So I thought.

95308D4C-BFEC-4537-BC51-FE6B45D1F7A2.thumb.jpeg.8d96ff7b9f5ce674cdbd918fe6c8e5df.jpegWhat a turkey. 
 Chopping all this out was great. So great the inner sill couldn’t wait so fell off all by itself. Bugger.

Then a couple of months of work, Covid, catching Covid, work etc got in the way of progress. So a tidy up was in order.

17E6B450-9433-4159-B98F-6415EC427AE6.thumb.jpeg.84f9c0845e6b7b1de19d2da05df964c5.jpegThe old crossmember, which has the tramp bars fused to it, was chucked in the back, till more time was available. This was a great idea, as the sharp bit punched its way through the rear body mount, which promptly collapsed.

So by this point I have a car with half the floor out, the sills falling off by themselves, and the body mounts collapsing.. essentially, I think the gearstick was holding the body on.

There always comes a point where a decision has to be made....

 

 

After a short, soft think, clearly I’m gonna weld it up. 
Several smaller jobs are underway at the minute, hoping to get the welder out in the Christmas holidays if I get some free time. 


Will 2021 be the year it rides again?

Link to comment
Share on other sites

Great thread, please keep up the good work...!  Quite a few of these on farm patrol duties round these parts, always well loved vehicles.  I've read that the engine is a licence-built version of the Toyota lump that's in my old Hiace... Not quick, but pull your house down if you wanted!  

Great to see this level of welding/fabrication, 99.678/10... would read again!

Link to comment
Share on other sites

I had an R plate one a few years back, 2.8 TDX 7 seater, was a lovely dependable thing, not fast but solid and charming. It had been touched with a sparkly stick on the sills both sides at some point but was really tidy. Did two years worth of green laning in it and then sold it on. Miss it nowadays as it was cheap fun.

Link to comment
Share on other sites

  • rickvw72 changed the title to Daihatsu Fourtrak Project - Gone full frontal!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Similar Content

    • By cobblers
      Right so! I was looking to lease an EV through the business, but completely failed due to hating new car dealers, hating touchscreens and eventually settling on a hybrid which is out of stock until mid-late 2022. 
      So I gave up and decided to get a Land rover. I failed at that too, after my mate sent me a link to the advert for this on ebay, at about 9pm. Ten minutes later I had arranged to drive down to see it the next day.

       
      I'm a glutton for punishment, and I really miss my last t25 so it was pretty inevitable that I'd buy it. It was more money than I'm used to spending on these, but overall I was pleased with the deal.
      A dawn raid by our very own @worldofceri had it delivered on Friday morning:
       






      It's a Swedish van originally, and was imported in 2006. Incredibly solid, never been painted and a fantastic "worn in" look. It's a 2.1 "DJ" engine which is pretty healthy but as usual is weeping coolant from various places, they all do that sir. A friend has a rebuilt engine on his shelf so I budgeted that into the purchase - We'll see how it goes.
      Totally original other than someone put some mega Fox/Gowesty suspension on it, proper mega bypass shocks with external reservoirs and stuff, so I reckon I can probably take it off jumps or something. I won't.
      My plans are to (after cleaning the filthy interior) to just run it about, more or less as it is. It would benefit from a set of tyres - these are worn very ridged on the fronts that makes it even more noisy and harsh to drive, and has no spare wheel.
      I've rotated the tyres so now the front ones are smoother, we'll see how I get on. I do need to source another matching wheel for a spare as these are full time 4wd so you need to keep the tyres rotated regular and within a very similar tread depth. look - there's even a sticker telling you to:

       
      I really need to get some new number plates for it! If anyone knows a place who could make some OE style ones with that font all the VW dealers seemed to use in the 1980s, that would be grand - I want some with the dealers logo putting on the bottom:

       
       
    • By captain_70s
      Hullo,
       
      I'm a masochist from Leeds who is running two rusty, worn out Triumph Dolomites as my only transport in rural Aberdeenshire. You might recognise me from various other forums and Facebook groups. Realistically I need to buy a modern car of some sort, but instead I find myself looking at £300 Citroen BXs and Triumph Acclaims on Gumtree and thinking "yeah, that'd fit right in with the rest of the broken cars I can't afford".
       
      On to the cars, the main attraction being my 1976 1850HL "50 Shades of Yellow" that I bought for £850 and is currently my daily driver, here is a picture of it before I sanded off some surface rust and sprayed it badly in the wrong shade of yellow with rattle cans:
       

       
      Within a month of purchase I managed to plant it in to a steel fence backwards after a botched gear change on a wet roundabout and ruined the N/S rear wing, although judging by the other dent that's packed with filler it looks like somebody had already done the same. I also managed to destroy a halfshaft and one of my Sprint alloys (good for an extra 15hp) in the incident, so now it's sitting on it's original steelies but painted black (good for an extra 5hp).
       
      It's only broken down on me twice. once with some sort of fuel delivery related problem which may or may not have been an empty fuel tank and once when the thermostat jammed shut and it overheated and blew out some O-rings for the cooling system. It has recently developed a taste for coolant and oil which is rather annoying, although it's done 89,300 miles which is about 80,000 more miles than BL engineering is designed to last, I'm keeping my eye on eBay for replacement engines... 
      I tried to keep ahead of the rust a bit by rubbing down the arches and re-painting them, but apparently rattle can paint isn't great when you are spraying it at -5C, it also highlighted how although my car might have been Inca Yellow in 1976 it's now more of a "cat piss" sort of shade. So I ended up with the wrong shade of yellow which has rust coming back through after 5 weeks. Did I mention I'm incompetent?
       
      The other car is the first "classic" car I bought, so I can't bear to sell it. It's a '77 Dolomite 1300 and it cost £1400 (about £400 too much) and has been nothing but a pain in the arse:
       

       
      It looks much prettier (from 100 yards) but that's most due to the darker paintwork hiding the rust. It lives a mollycoddled life in my garage, where it somehow still manages to rust, and is utterly rubbish. 0-60 is measured on a calendar, top speed is 80ish but at that point it uses more oil than petrol, it rarely ventures over 50mph and if you encounter an incline of any sort you can kiss that sort of speed goodbye, along with about £20 of 20W50 as it vanishes out of the exhaust in the form of blue smoke.
       
      One of the PO's had clearly never heard of the term "oil change" so it developed into brown sludge that coated everything internally with the next owner(s) blissfully pouring fresh oil on top of it. This lasted until about 600 miles into my ownership when there was muffled "pop" from the engine bay and the car became a 3-cylinder. The cause was catastrophic wear to the top end causing a rocker arm to snap:
       

       
      As this was my first classic car I'd assumed it was supposed to sound like the engine was full of marbles, it wasn't.
       
      I put the engine back together with second hand bits declared it utterly fucked and promptly did another 5000 miles with it. After about 3500 of those miles the oil burning started, valve seals have gone so it's been relegated to my parent's garage as a backup car and something to take to local car shows as the 1850 is now embarrassingly ugly. I'm keeping my eye on eBay for replacement engines (deja vu, anybody?) Oh, I also recently reversed it into a parked Ford Fiesta and royally fucked up the rear bumper, rear panel and bootlid. Did I mention I'm incompetent?
       
      There have been two other cars in my life. My first car, a 2008 Toyota Yaris 1.0 an it's replacement a 2012 Corsa 1.4T. I didn't really want either of them, but it's a long story involving my parents and poor life choices. Ask if you want to hear it!
       
      So that's a brief summary of my current shite. If you want more pictures or details of anything do say as I've got photos of almost everything I'd done with the cars.
    • By Zelandeth
      Well I've been meaning to sign up here in forever, but kept forgetting. Thanks to someone over on another forum I frequent poking me about it recently the subject was forced back into my very brief attention span for long enough to get me to act on the instruction.

      I figure that my little varied fleet might bring you lot some amusement...

      So...we've got:

      1993 Lada Riva 1.5E Estate (now fuel injected, as I reckon the later cars should have been from the factory...).
      1989 Saab 900i Automatic.
      1987 Skoda 120LX 21st Anniversary Special Edition.
      1985 Sinclair C5.
      2009 Peugeot 107 Verve.

      Now getting the photos together has taken me far longer than I'd expected...so you're gonna get a couple of photos of each car for now, and I'll come back with some more information tomorrow when I've got a bit more time...

      Firstly...The Lada. Before anyone asks - in response to the single question I get asked about this car: No, it is not for sale. Took me 13 years and my father's inheritance to find the thing.


      Yes, it's got the usual rusty wings...Hoping that will be resolved in the next couple of months.

       






      Next, a proper old Saab. One of the very last 8 valve cars apparently, and all the better for it. I've driven two 16v autos and they were horrible - the auto box works sooooo much better with the torque curve of the 8 valve engine. Just wish it had an overdrive for motorway cruising...









      Next up a *real* Skoda...back when they put the engine where it belongs, right out the back. In the best possible colour of course...eye-searingly bright orange.







      Seat covers have been added since that photo was taken as it suffers from the usual rotting seat cloth problem that affects virtually all Estelles.

      Then we have possibly the world's scruffiest Sinclair C5...



      Realised when looking for this that I really need to get some more photos of the thing...I use it often enough after all! We have a dog who's half husky, so this is a really good way of getting him some exercise.

      Finally - again, I really need to take more photos of - we have the little Pug 107.



      Included for the sake of variety even if it's a bit mainstream! First (and probably to be the only) new car I've bought, and has been a cracking little motor and has asked for very little in return for putting up with nearly three years of Oxford-Milton Keynes commuter traffic, before finally escaping that fate when my housemate moved to a new job. Now it doesn't do many miles and is my default car for "when I've managed to break everything else."

      I'll fill in some more details tomorrow - I warn you though that I do tend to ramble...
    • By rusty_vw_man
      Been a serial lurker and occasional poster of nonsense, but have never quite got round to posting some pictures and the ongoing tribulations of being a serial VW licker.
      First a disclaimer - I like old VWs, partly as I grew up with them and partly because I understand how the work and I can fix* them. I do not like the 'scene' attached to them, it seems to attract too many of a certain type of person I am often allergic to - they bring me out in a shouty rage. 
      First car was a'69 beetle in red, driven flat out everywhere  until the rust took it. This was followed by a succession of Mk2 golf , vauxhall omega (vauxhall being close to VW in the sales ads)  a free Mk3 golf which was dire and tried to kill me multiple times. I have no photos of any of these as they were pre-camera phone and mostly awful. 
      Then came a T25 camper bought using generous donations from friends and family at our wedding . Bought, and a week later after hovering 15 years of dog hair out of it, we drove it all the way to northern Norway on honeymoon. Used it for a while.
      Bought a vauxhall astra estate (again, it was almost a VW in the sales section). It sucked. It did a year of commuting then it was scrapped. Was gifted a skoda fabia estate by my dad as a sensible run around. 
      During this time my wife wanted a sensible runaround for her and the kids, so we bought a bright orange 1971 beetle (rusty of course) which was excellent fun. People were openly critical of apparent lack of regard for our offsprings safety. I pointed out it had seat belts.
       Due to rusting the T25 was sold as a project, the Skoda was sold for being too dull and a T2 purchased.
      Here is the peak of VW ownership, where the beetle, bay and T25 are all in one place just before sale:

      So now we had two aircooled vehicles, the newest of which was  made in 1973.
      This lasted for exactly 9 months., during which I did lots of this:

      to be repeatedly rewarded with this:
       
      When the breakdown driver asks how the kids are getting on, you know you've seen him too much....
      I also conducted some invisible repairs on the rusty bits of the beetle. I'll point them out if anyone can't see them:

      A promotion and car allowance then allowed me to purchase a C3 Picasso (best not ask, I hate it). Its purple. I feel like a dick when I drive it. 
      Beetle then had to go due to third child and not enough seats, but it had the good engine, the van did not. A swap occurred. My neighbors love* me and find my antics endearing*. I clearly have no need for a drive or garage.

      After 1 too many FTPs, I was told van or family. I chose family and the van left. 
      I then went a looked at another T25 minibus (three kids now) and was in much trouble for even considering another van. 
      Two weeks later, after some small* arguments* we were in total agreement* and the van was purchased. 
      Roughly 18 months ago - note lovely laqueer peel, mismatched rear wing and low level tide mark:

       

      After some light fiddling I have made a very basic day van affair, and we dragged it with camping gear and the three kids all the way up to the arctic circle in Finland last summer (wife has family in that part of the world).
      6 days before departure I noticed the rear suspension had a bit of paint hanging off. I pulled and it showed this below:

       
      Trip to machine mart, a google of "mig wleding for numpties" and a youtube video later and I'd made this:

      and away we went. 
      Here it is in a moody B&W photo  in the land of the midnight sun, which really brings out the high quality paint. the rear suspension is still attached though, so winning. 
       
      That's an epic catch up post really, but will use this space now to document the exciting* repairs and work done on it to keep everything attached .and working.... 
    • By Broadsword
      I think the Broadsword fleet has become sufficiently complicated to merit a combined thread so that gradually all new additions will appear in one place.
       
      As of Sunday 17th March the situation is interesting.
       
      Two Citoren Xantias (remember the white Xantia of Excellence is for sale people!)
      http://autoshite.com/topic/34699-w-reg-citroen-xantia-20-hdi-xantia-of-excellence-%C2%A3999/
      http://autoshite.com/topic/34596-citroen-xantia-double-madness-rust/page-2
       
      A turquoise XJR6 pending overdue-collection (need that gone now!)
      http://autoshite.com/topic/34003-jaguar-xjr6-double-madness-double-sold
       
      An XJS 3.6 manual project which will get in high gear soonish. Wont be a keeper but will be fun getting it back to something presentable. Drivers fantastic!
      http://autoshite.com/topic/34664-jaguar-xjs-36-manual
       
      A Range Rover P38, which is turning out to be really rather good.
       
      And to mix things up even more I'm off on a collection caper today. Had first refusal on it and was expecting it to come around in a year, but things soon changed and no way was I going to pass up on it. It may well render the second Xantia redundant as I've got a really good feeling about this motor.
       
      In the meantime here are some snaps of the Range Rover. As usual it was a car I said I would probably never buy due to their reliability*. I have said the same of Jag XJR, XJS, XK8 and I have had all of those now. Basically the moment I declare buying a particular car is impractical or improbable, I end up buying one.
       
      Things to note on the P38. It's a nice colour with tidy body. The EAS has been removed. It runs and drives lovely and it doesn't have enough electrical problems to hinder progress. The main one is the driver's side window not working, but that should be fixable. I've tried changing the outstation, that didn't fix it. Might be wiring under the seat. Other than that I bought it and took it for an MOT the very next day, and it passed. Since then it had what seemed like a battery drain, but since unplugging the RF thingy for the remote locking and putting on a proper lead-acid battery, which the car can actually charge, unlike the modern lead-calcium batteries, it has been perfect. I will treat it to a full service soon.
       
      Stay tuned for the latest collection later today!



×
×
  • Create New...