Jump to content

gm's unhealthy obsession with mx5s - unlowering the green machine


gm

Recommended Posts

5 hours ago, paulplom said:

Will it work on my fabric roof?

I think you need to buy the proper stuff for a fabric roof - renovo from mx5 parts - although there's probably stuff you can get to waterproof tents etc from a camping shop that would work just as well. I wouldn't do yours in boot polish though, could get messy :( 

Link to comment
Share on other sites

17 minutes ago, paulplom said:

It's gone quiet. Any progress?

I'd hate to think you were lying stuck underneath with a gearbox on your head.

progress has been........well........a bit shit, really :( 

 

 

no updates yesterday as I didn't want to be posting in a bad foul mood - I spent the day stealing the Torsen diff off the mx5 which turned into a pig of a job - a good couple of hours got me this far

IMG_2931.thumb.JPG.670e6770e6408b767c736ccadc81321c.JPG

thats the power plant frame off the mx5, not the one off the kit - took a lot of dismantling

the two prop shafts are of differing lengths, I was expecting that

IMG_2934.thumb.JPG.d34859821f9ea0d360005e311957047e.JPG

but what I wasn't expecting was the Torsen output flanges are wider apart than the Viscous flanges

IMG_2933.thumb.JPG.be41966ac8454895c5f371c09cb6dd11.JPG

which means the half shafts also have to come out. 

keen viewers may recall that when I was doing the CV joints, one half shaft was stuck in the hub :( 

IMG_2501.thumb.JPG.dd73c5e9f53eda69fab252a9111dd9ad.JPG

so that needs swapping over too. but it has one of my nice new pollybushes fitted - I'll need to order a replacement for the swapped over hub now (can you feel my mood darkening ?)

after a lot of effort, the vlsd is fitted to the mx5  but by this time I was really fed up, then it started pissing down and I was working outside. I got the mx5 down off the ramps (no exhaust fitted yet, sounds dreadful) and chucked the tools in the garage

IMG_2935.thumb.JPG.f250405eff19af1d3f8eb398ad7d585a.JPG

went to shut the garage door and knocked over one of the ramps which couldn't just land on the floor, could it ? 

on no, the little bastard took a chunk out of the freshly powder coated exo frame

IMG_2936.thumb.JPG.e86632b265b1c3c25406ae8fbef4953d.JPG

I'm sure you can imagine just how angry I was at this point (the neighbours probably don't need to imagine)

so I locked up and opened a beer

fucking cars ! why do we bother ? 

 

 

todays tasks - fit an exhaust to the mx5 and start wire wheeling the diff etc ready for paint. 

my (frankly ridiculous) plans to have the chassis rolling by the end of the week are well and truly stuffed. 

 

 

Link to comment
Share on other sites

8 minutes ago, gm said:

progress has been........well........a bit shit, really :( 

 

 

no updates yesterday as I didn't want to be posting in a bad foul mood - I spent the day stealing the Torsen diff off the mx5 which turned into a pig of a job - a good couple of hours got me this far

IMG_2931.thumb.JPG.670e6770e6408b767c736ccadc81321c.JPG

thats the power plant frame off the mx5, not the one off the kit - took a lot of dismantling

the two prop shafts are of differing lengths, I was expecting that

IMG_2934.thumb.JPG.d34859821f9ea0d360005e311957047e.JPG

but what I wasn't expecting was the Torsen output flanges are wider apart than the Viscous flanges

IMG_2933.thumb.JPG.be41966ac8454895c5f371c09cb6dd11.JPG

which means the half shafts also have to come out. 

keen viewers may recall that when I was doing the CV joints, one half shaft was stuck in the hub :( 

IMG_2501.thumb.JPG.dd73c5e9f53eda69fab252a9111dd9ad.JPG

so that needs swapping over too. but it has one of my nice new pollybushes fitted - I'll need to order a replacement for the swapped over hub now (can you feel my mood darkening ?)

after a lot of effort, the vlsd is fitted to the mx5  but by this time I was really fed up, then it started pissing down and I was working outside. I got the mx5 down off the ramps (no exhaust fitted yet, sounds dreadful) and chucked the tools in the garage

IMG_2935.thumb.JPG.f250405eff19af1d3f8eb398ad7d585a.JPG

went to shut the garage door and knocked over one of the ramps which couldn't just land on the floor, could it ? 

on no, the little bastard took a chunk out of the freshly powder coated exo frame

IMG_2936.thumb.JPG.e86632b265b1c3c25406ae8fbef4953d.JPG

I'm sure you can imagine just how angry I was at this point (the neighbours probably don't need to imagine)

so I locked up and opened a beer

fucking cars ! why do we bother ? 

 

 

todays tasks - fit an exhaust to the mx5 and start wire wheeling the diff etc ready for paint. 

my (frankly ridiculous) plans to have the chassis rolling by the end of the week are well and truly stuffed. 

 

 

Oh man, I've had days like that... It always comes good after a rest and a beer though!

ONWARDS! 

Link to comment
Share on other sites

More wire wheeling and painting today

F8A87875-FE84-4CC0-93A9-704B559A885D.thumb.jpeg.c7b6d8a44d1a0a83e63e25a6ad332cf9.jpeg

the CVs are in good condition (thank fuck) so they can make do with a clean and a lick of paint 

8015E74D-8AFC-44FF-8ED7-21679795213F.thumb.jpeg.adb427087e87b471aa9e0040508e98b9.jpeg
 

that’ll be three days since I collected the kit and I have literally done nothing with it yet :( really need to get my finger out and get cracking next week 

Link to comment
Share on other sites

In theory, yes, but it turns out that the halfshafts are thicker as well as shorter on the Torsen so need to stay with the diff. Sorted now but I wish I hadn't wasted all that time on the cv boots on the viscous shafts. Hey ho, keep telling myself I enjoy this :) 

The mx5 still doesn't have an exhaust - really need to sort that out tomorrow 

 

Link to comment
Share on other sites

a bit more of a productive day - first off @paulplom came round to collect the roll bar for his mx5 and I took advantage of a spare pair of hands to flip the exo chassis over so I can get started fitting the floor panels 

IMG_9504.thumb.JPG.977884e6900abb81c7250ced0ddf0ec0.JPG

then I turned my attention to the currently immobile mx5

what I am needing for the exo is this

IMG_9508.thumb.JPG.82baaa753a656cddd20434f96eba96d1.JPG

which I can replace with this

IMG_2499.thumb.JPG.9397f20790512bbd7f59b8d311a2d47b.JPG

this is the one with the shaft that will not come out no matter how hard I hit it

so up on jacks, wheel off etc

IMG_9505.thumb.JPG.3b831a3e6a2e108b1ce103cb50369a53.JPG

and fit the hub / shaft combo

IMG_9506.thumb.JPG.e0232dd737c3a473ff2fa84587552e78.JPG

and discover that I am a complete helmet and can't tell my right from my left :( 

yes, I've just spend over an hour dismantling the wrong side of the car !

somehow managing to laugh it off I cracked on pulling the other side of the car apart (doing battle with the tightest bolts in the world - the notorious 'long bolt' which always seizes in place)

eventually it was all back together and I replaced the old asbo exhaust with a standard one I picked up a few weeks ago, even refitted the catalyst.

look, a pea shooter !

IMG_9509.thumb.JPG.e2d57cf3bc4c0a62b3cff5f0bd24e7b2.JPG

i took it for spin and it sounds normal terrible - maybe I'll stick an eBay cone filter on for a little bit of noise.

good news is that the viscous diff still works, doesn't lock up as well as the torsen did but can still kick the back end out on the roundabouts :) 

so that's the mx5 pretty much back to standard now, ready for whenever I do decide to sell it.

But not yet, there's still trackdays to be had - anyone on for Monday next week ? 

Link to comment
Share on other sites

more to get them off the living room floor than anything else, I test fitted the floor panels for the exo

7A088CFB-CFE9-40FC-B947-E4FB7FBB9DF6.thumb.jpeg.4855f0763a8ea9127a70b47afb8767c2.jpeg

there‘a going to be a very tedious day of drilling and riveting next week

90 of the little sods !

D2FAE7CB-AE65-48F0-8F84-261C33378BE4.thumb.jpeg.93e581e4d6f35cbfc1047bd6da4e9f39.jpeg

top notch tech drawing skills :) 

50138366-91BA-4A63-8185-E2817AC75D52.thumb.jpeg.42d9b58946ccf705c291cc8999cd7356.jpeg

the brake and fuel lines need to go on while it’s upside down, I really do need to get them ordered ASAP :) 

Link to comment
Share on other sites

The kit comes with a roll of copper pipe but rather than fannying on making my own, I'll be ordering a full set of braided flexis - these run direct from master cylinder to the callipers so save a lot of hassle.

 https://freakyparts.co.uk/collections/mazda-mx5-mk1-mk2-na-nb-brakes/products/hel-braided-brake-hose-kit?variant=7289960333357

i've not figured out a solution for fuel send and return but hopefully something similar can be found 

 

Link to comment
Share on other sites

I’ve got some shiny new drill bits ready but the battery on the impact driver is knackered - shows fully charged but conks out after a couple of minutes. I’ve had it apart and reckon I can replace the individual cells so it will live on and come in handy I’m sure :)  

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...