Jump to content

gm's unhealthy obsession with mx5s - unlowering the green machine


gm

Recommended Posts

and employed some very dubious methods to drain the tank

BB1457A4-360B-43C2-AA69-AEA8421E47B3.thumb.jpeg.f0edd322c0c7437b6133869785d6cd9e.jpeg

fuel pump powered up from the 12v supply for my garage radio

BE7FE2A3-1918-4B8F-8AFE-A9F727E49356.thumb.jpeg.f22cc9d4a68f71e32cec8551a5ca5a02.jpeg

car battery disconnected for 'safety'

49B2FB90-FF76-4C8A-B49C-D901AF452E48.thumb.jpeg.fdfc18b5b7a5955b0b8d4c029e38018e.jpeg

managed to squeeze about 25 litros out of it which i dumped into the mx5, now i can crack on with sorting the fuel filler that the iva man didn’t like (it's that flexible pipe in the second pic that is the problem, sold as iva compatible but apparently I have a picky tester :( )

Link to comment
Share on other sites

time to take on a job I'd been dreading :

fullsizeoutput_3ef.thumb.jpeg.8857d638ffd3079b519f129d7b624a79.jpeg

the T piece that links the rear brakes to the central line needs to have a locknut or loctite applied - sounds easy enough but it's sandwiched between the fuel tank and the differential - this is not going to be easy :( 

 

Link to comment
Share on other sites

my original set up of the fuel tank had several issues that needed to be dealt with

first off, i needed to make it level so the sender gave a true reading - the rear was already raised, i just did the same with the front

9CCE7A91-4959-440E-BA59-50CDCCC0A849.thumb.jpeg.cb22c1681a56d2f31728b75e91fd4a17.jpeg

the tester wasn’t happy with my bare metal P clips on the fuel hose (even though it has a tough plastic wrap)

AC21F237-65EA-4782-A385-861C25EEC8C0.thumb.png.94cb5dbccd5fc4b1bbd0f8a640aee15b.png

and i wasn’t happy with the bracket everything was fitted to - a suitable replacement was made 

ECEBACC7-B146-47C0-AD23-D5CEE92CDF74.thumb.jpeg.c32e284e2f8b888d5cde41ac13750cdd.jpeg

the fuel filter was held in place with a (fairly hefty) cable tie which wasn’t up to scratch, a rather large P clip was sourced and bolted in place

98D8D5BE-C3AB-478A-A545-1D11312B4C1B.thumb.jpeg.31375563a5e4f5cd2e631179825fd5c0.jpeg

all of which should hopefully satisfy the man from delmonte 

35632E86-BA60-4A08-B891-776821944385.thumb.jpeg.0d6e70ec405050c4d149ca340b4dc583.jpeg

Link to comment
Share on other sites

but the big problem i have is this

the fuel filler and vent hose need to make a tight 90degree bend to reach the filler neck

6400C52A-838A-4440-B712-F83BB82FBD82.thumb.jpeg.4ebb024ff750595c4382c47ee8850dfa.jpeg

F6B01D4A-C652-4732-A72C-DCF4AC9B63DD.thumb.jpeg.0a78cf49eafcf12caccc6620d3992d9f.jpeg

the flexi i had used was too flexible and ended up kinked, the original rubber pipe from the mx5 isn’t flexible enough 

455DFB08-929B-4AD6-BA43-A8E658562D56.thumb.jpeg.4ff04adf9ba590b2ba041f549f146b70.jpeg

so what i need is something like this

F237B428-864D-4B3A-B3CF-19B0391A3331.thumb.png.cf519ca275695e493dcabda18c028289.png

which is the best part of thirty quid and not guaranteed to fit ! 

time to take a wander round the scrappies and see what i can find 

(the internal diameter is 49mm if anyone has any suggestions ?)

Link to comment
Share on other sites

1 hour ago, gm said:

but the big problem i have is this

the fuel filler and vent hose need to make a tight 90degree bend to reach the filler neck

6400C52A-838A-4440-B712-F83BB82FBD82.thumb.jpeg.4ebb024ff750595c4382c47ee8850dfa.jpeg

F6B01D4A-C652-4732-A72C-DCF4AC9B63DD.thumb.jpeg.0a78cf49eafcf12caccc6620d3992d9f.jpeg

the flexi i had used was too flexible and ended up kinked, the original rubber pipe from the mx5 isn’t flexible enough 

455DFB08-929B-4AD6-BA43-A8E658562D56.thumb.jpeg.4ff04adf9ba590b2ba041f549f146b70.jpeg

so what i need is something like this

F237B428-864D-4B3A-B3CF-19B0391A3331.thumb.png.cf519ca275695e493dcabda18c028289.png

which is the best part of thirty quid and not guaranteed to fit ! 

time to take a wander round the scrappies and see what i can find 

(the internal diameter is 49mm if anyone has any suggestions ?)

hell, it's only money - I've ordered one of the above, hope it bloody fits !

Link to comment
Share on other sites

another productive afternoon

the reflectors supplied as part of the kit were deemed “too wee”

46F8777A-6774-426E-A07D-6DE7AD96293E.thumb.jpeg.1805b256a6163db253e8e629deb7a2b0.jpeg

ebay to the rescue - they look shit but might accidentally fall off after the test

F9E3F366-B9DB-42D9-A3F0-16CE887E75B9.thumb.jpeg.ae2bf60fcb0568b6e9f500cd4a893f90.jpeg

the harness bolts needed to be loctited

1E2D3221-BE57-4562-85B1-E3EA229F6662.thumb.jpeg.eb18035a3a0676caf12f3f6f69432e0b.jpeg

amd while the seats were out i gave the floor a wash

7850E867-855F-4CDD-9B0F-780DCFCD34A3.thumb.jpeg.f69ff4d2137532ba35cd7d913bbdada4.jpeg

still pretty manky- i think i’ll order up some checker plate rubber.

next up - this brake flexi is perilously close to the tyre on full lock

423AEA32-0249-44A4-91C0-35E92583A714.thumb.jpeg.7e156a105d8b4d3219030422125ce7ea.jpeg

an easy enough fix

8C71E590-E8A4-4048-BA09-D15839AA925E.thumb.jpeg.80fb9f0530c69cba1953eb709b6e9ceb.jpeg

 

Link to comment
Share on other sites

i rather liked the look of the bare aluminium floor but it got trashed by snow/slush/grit/whatever on the way to the test centre 

and was slippy as a bastard when wet

i gave it a good clean up but it still looked shit

13C00D93-3B3B-4B75-A5ED-58FA139432A8.thumb.jpeg.29be4cc49216488b00d8356de48e49b3.jpeg

time for some “wallpaper aided design”

7D0F3218-D4CA-4C58-93BC-C8DAE8210067.thumb.jpeg.c18c62dcde535ea551ad5af56dbc4fcb.jpeg

which took way longer than i expected

i ordered a big sheet of checker plate rubber 

100452F5-9E93-4674-A99A-B7A6B8E8BC37.thumb.jpeg.e53a7404a804c0dd36d130610ca0fb7a.jpeg

didn’t leave much room for error  - measure twice etc

602F08F3-C430-4AFD-9CCE-A4165DAD3307.thumb.jpeg.c00a969910a9c0fdfaa078c2d9a1a9c9.jpeg

what an improvement! looks so much better

023CEB01-5A8B-491E-AC4C-4FBEF680B892.thumb.jpeg.014b28c1c73be6447ee66128dc9d2e6e.jpeg

but as that took about four hours, they can get stuck down tomorrow 

Link to comment
Share on other sites

i also fitted some wanky headlights to the mx5

A9B6F62E-76A6-4F5B-8ADE-F52E6BC2A89E.thumb.jpeg.d8b7f0b2079e7ced1c319f5f39fe85f8.jpeg

61CFD575-A50E-4151-9946-1C138E55CF23.thumb.jpeg.8d2e000c58ac8106e29815cbe2764017.jpeg

they’re bloody bright

FD35951D-D45A-47C8-BF92-A9116DFC0CEE.thumb.jpeg.8404363a0a846355dc25359ba8e12d64.jpeg

FA808018-A213-4696-8F1F-C438D632FFBC.thumb.jpeg.7f9551958892929a0e7cf682b026549b.jpeg

even if they do look a bit wanky

 

i bought them off a really nice chap who had bought them for his Scimitar. then decided they looked too wanky !

E7A59863-519F-4507-B8F5-D850DA9A7404.thumb.jpeg.1fee3ff4c91dcf9d0f3fa9832a2109dc.jpeg

he was probably right but the rest of the car was an absolute beauty. 

but that wasn’t the most impressive thing in his garage - he also has a Scammel Scarab !

not this one but it was in lovely condition, sounded awesome when he fired it up 

D3BF7EB8-8B03-494E-8E16-3193DCC9A005.jpeg.dde825d1516522e64d4340eb3452e899.jpeg

i love it when you go to buy parts and meet like minded folk, i was probably there for an hour talking shite about cars :) 

 

Link to comment
Share on other sites

pop up headlights are the best thing in the world - i’ll never tire of seeing the reaction when kids see them for the first time, it’s hilarious :) 

 

i spent ages wiring up the sidelight / indicator ring-piece then decided it just looked too naff so pulled the plug on the indicator bit

589F9480-3253-4065-B198-90642209DC12.thumb.jpeg.baa514e9e0ff1d0cbd42bd6186fb742a.jpeg

 

Link to comment
Share on other sites

I just want to say that Like is for the Scarab and Pop up head lamps in general

and to make sure that no one accuses me of liking LED tat LOL

(as an aside, aside from being LED's (and yall know my thought on those are LOL) I find atheistically these particular style of 7 inch LED head lamp always look quite naff, black soulless almost, looks like your staring into dead eyes if that makes sense)

but my usual grumblings about LEDs aside its also very awesome to see progress with the Exo is happening! hopefully not long until the next visit to the Ministry man? :) 

Link to comment
Share on other sites

surely this is the perfect setting - no one needs to see the ugly sods during the day until they pop up at night :) 

i have a spare set of pop ups that came from the Exo donor car, when i eventually get round to doing my garden /patio, they will be strategically employed as comedy security lights !

Link to comment
Share on other sites

time to get that fuel filler sorted

the pipe on the left was too flexible, the one on the right not flexible enough

IMG_8738.thumb.JPG.dcf475328589fc0d4f8545ffb7a95758.JPG

so I splashed out on a pre bent one

IMG_8793.thumb.JPG.689de12df4ef44a674ec3f1eff781185.JPG

the only problem being that it is too wide

IMG_8794.thumb.JPG.720e5f7c788b09aac17d9bb0efe1eba1.JPG

but a slice off the old pipe makes for a perfect shim

IMG_8795.thumb.JPG.cd84beb74fc284309812f28e5794ddb0.JPG

sorted :) 

IMG_8796.thumb.JPG.58c4a75cf30ba385e6e6cdd1a6461dc0.JPG

except my clamps didn't fit - a few days later, eBay came up with the goods

IMG_8834.thumb.JPG.f3792fdeb1ae173443af24b04c2cb89f.JPG

IMG_8845.thumb.JPG.0db6eb86766fa33a6339e8b95a004236.JPG

IMG_8844.thumb.JPG.450240f6419e5e37aed743cb2a4b0b92.JPG

but no matter how I adjusted things, the neck would not sit flush at the cover :( 

IMG_8797.thumb.JPG.688a802c500a482491796f7f2018a4d3.JPG

IMG_8798.thumb.JPG.40e21f0b34ff77c22f92348fc825bc77.JPG

the fibreglass was threatening to crack if I screwed it tight to straighten it out so I got busy with the hole saws

IMG_8801.thumb.JPG.9648a25881516a4c0d1621520218cf36.JPG

IMG_8802.thumb.JPG.d9356eca260d601a889832969f52fecf.JPG

and we have success !

IMG_8848.thumb.JPG.367d43aa11f5a306e4f79516acba61ef.JPG

except nothing is ever that straightforward - zoom back on that image

bugger !

IMG_8847.thumb.JPG.e8f72b6ad4ee60c150036b6c7e661870.JPG

not ideal but it got the job done

mr iva can see the new inlet without even taking the cover off now !

IMG_8852.thumb.JPG.54853d605a6fc8631f1fd8cf1f8bc5ab.JPG

I'll fix this properly* somehow but this'll do for now

IMG_8853.thumb.JPG.695e01c1c89fc3e498c5dcf4c98cd98d.JPG

stick an old Eunos badge on ? no one will ever know :) 

IMG_8854.thumb.JPG.1cae32daeea350d2e840150031e7fd5e.JPG

so that's the fuel filler sorted, best tick it off the list

IMG_8855.thumb.JPG.0b0c0ed8b951cc95f0e74ff87070c944.JPG

no, no, no, this needs a bigger tick !

IMG_8856.thumb.JPG.f028a9e0674c3e044cfbe92c724ac83c.JPG

I'll give it a quick test drive and see about booking the re-test

   

Link to comment
Share on other sites

  • gm changed the title to gm's unhealthy obsession with mx5s - EXO snagging complete, ready for the retest :)

as the sun was shining, it seemed a good time to whip off the dust sheet and let the exo see what daylight looks like

A0E766D2-70E2-468B-900F-41B00DD90A7E.jpeg.9d710a8b059b47a66893804fa83e6bfe.jpeg

garage gm’s new apprentice (   @DVee8 junior) was employed to bring it safely onto the drive

17606041-E8C8-4B69-8A0D-A6FD0E2A459D.jpeg.ad33d66d8e1317e8a9a6650e533519c5.jpeg

everything was ticking over nicely so he took it for a quick run up and down the street - i think he approves :) 

CDF05E36-3D52-454A-845C-EB858A8378F0.jpeg.b85e24b0f2c40841c6168001cf5b3faf.jpeg

 

5E09FBBD-024C-42BB-8B60-C7D9A123A3B2.thumb.jpeg.505a5c041d672d920e5ce0cca33f9028.jpeg

0126D4BB-4CF6-48B6-8E10-664A3FEE0623.thumb.jpeg.05255ea7237fe960c3ea087845bef548.jpeg

 

Link to comment
Share on other sites

3 minutes ago, loserone said:

Is he on here yet, or would that cramp his dad's style?

Hahahaha, I have told him, and he is well aware of AS. But at the moment he aint that bothered, he doesn't  do that much social media.

Link to comment
Share on other sites

I called the IVA office on monday to arrange for the retest, expecting to wait a few weeks. 

well, err, you know the drill.....

fullsizeoutput_3fe.thumb.jpeg.beea16004b4b81399c7e68d3fcbf71c3.jpeg

IMG_8988.thumb.JPG.5dc511c12293b5c3ddcccc8b1ca6f941.JPG

had a dream I had slept in for something important

IMG_8990.thumb.JPG.70ea6a4fb32fc3076b6bbaed09629732.JPG

aaaghh !

IMG_E8993.thumb.JPG.fd5adcca4dd5bcf6bee33e7391cb41da.JPG

quick, check the weather

fullsizeoutput_3ff.thumb.jpeg.a1238d067e8450b8de93a0fad0f9d843.jpeg

no snow today :) 

IMG_8992.thumb.JPG.5ac927e77993d4b1785467fb5234c886.JPG

strong coffee, piss weak orange drink

IMG_8994.thumb.JPG.c5104d1e2e750c35b87ad2feea8714b0.JPG

tools packed just in case

IMG_9009.thumb.JPG.c2481ebe90334dc82435d8a31be81f33.JPG

let's hit the fucking road !

IMG_8996.thumb.JPG.47f581844d360cdfa9c9ff7a073e6362.JPG

need fuel

IMG_8998.thumb.JPG.6c6bd40de9598800596764685bcdcdaf.JPG

need artsy photo

IMG_9002.thumb.JPG.657a808b8d64553a2ac5d7f427938859.JPG

need coffee

fullsizeoutput_408.thumb.jpeg.540f9cfeff5a376dc459b61acb679a32.jpeg

need cup holders !

IMG_9004.thumb.JPG.e250ebb1391944cb54bbda6e2c8998d2.JPG

and it's nemesis time again !

fullsizeoutput_40a.thumb.jpeg.756e388acb0b0a5752cd3fe9dc7cf02d.jpeg

 

Link to comment
Share on other sites

blah blah blah test... blah blah blah forms... blah blah blah here's your certificate...

what ? wait, what ?

yes, you heard it right 

two years of blood, sweat and tears and I am proud to announce that I have PASSED THE BLOODY IVA !!!11!!!11!!111 

IMG_9007.thumb.JPG.0b49a12415d1cc6a3d975532d8fc1712.JPG

THIS THING IS ROAD LEGAL !

fullsizeoutput_405.thumb.jpeg.481fe643b911ca93b2bb045a80f08fef.jpeg

fullsizeoutput_406.thumb.jpeg.6e680e6981ebc9d5dbcebc8a22ae415f.jpeg

fullsizeoutput_407.thumb.jpeg.ef48a011852ecdb9f1cc7d2c5a2c37c4.jpeg

and it's fooking terrifying on the motorway !

fullsizeoutput_409.thumb.jpeg.6bd1d54bb6edca972cacb75d4b335cfa.jpeg

vidos to follow later 

IMG_9008.thumb.JPG.5befa838a517af616ee115e9419a85e8.JPG

 

Link to comment
Share on other sites

  • gm changed the title to gm's unhealthy obsession with mx5s - BIG NEWS TODAY been for the re-test
2 hours ago, gm said:

blah blah blah test... blah blah blah forms... blah blah blah here's your certificate...

what ? wait, what ?

yes, you heard it right 

two years of blood, sweat and tears and I am proud to announce that I have PASSED THE BLOODY IVA !!!11!!!11!!111 

IMG_9007.thumb.JPG.0b49a12415d1cc6a3d975532d8fc1712.JPG

THIS THING IS ROAD LEGAL !

fullsizeoutput_405.thumb.jpeg.481fe643b911ca93b2bb045a80f08fef.jpeg

fullsizeoutput_406.thumb.jpeg.6e680e6981ebc9d5dbcebc8a22ae415f.jpeg

fullsizeoutput_407.thumb.jpeg.ef48a011852ecdb9f1cc7d2c5a2c37c4.jpeg

and it's fooking terrifying on the motorway !

fullsizeoutput_409.thumb.jpeg.6bd1d54bb6edca972cacb75d4b335cfa.jpeg

vidos to follow later 

IMG_9008.thumb.JPG.5befa838a517af616ee115e9419a85e8.JPG

 

fucking awesome! really pleased to see you have got it through an IVA at long last!

 

it will be interesting to see how it ends up recorded on the DVLA as :) 

(and what special notes if any end up on the V5c)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...