Jump to content

gm's unhealthy obsession with mx5s - unlowering the green machine


gm

Recommended Posts

Good to see another exo builder (and another G- EXO plate!) - I am new to these parts and did wonder how mine would go down here! (I am another serial MX5-er but NA and NC - my build is on the MEV forum if anyone’s interested - Exocet build thread)

All I can say is yours looks great, and if you ever consider it,  then a turbo turns it into an animal - I boosted mine during lockdown (and am still nailing details!), but 220BHP makes it a completely mental little thing!
 

E84107D6-0C53-4703-921F-6514F712631B.thumb.jpeg.f9e94990fa8234056fbe2a3d9da1eeb4.jpeg

Link to comment
Share on other sites

Hi Browno, 

i remember reading your build thread way back before i started on mine, it was one of the reasons i chose to go ahead and build my own. i find it fascinating reading about how each builder has approached and solved the various problems that come up, there are a few things i would go back and do differently if i was starting again but i’m very happy to have it on the road.

one thing i wasn’t prepared for is the amount of attention it gets, but i don’t mind as i’m very proud of my little exo :) 

a turbo is definitely a long term plan, but for now, i’m happy with the 115hp from the 1.6 engine, it still goes like a rocket and puts a big grin on my face every time.

 

Link to comment
Share on other sites

it might not be immediately obvious from the photo but with the smaller steering wheel fitted, the speedometer is quite badly obscured :( 

F48B5303-7B92-4992-86F3-FF83435334E0.thumb.jpeg.6efce19453369ff12f1906bc10c8dedd.jpeg

not a major problem as i’ve been using a gps speedo in my phone but a better solution is needed.

hence, the big book of tempt has been open at this page for several weeks

17B3EE70-7CAD-4103-B139-125BEE9C4201.thumb.jpeg.a96a224334c0bae6e16304390efb6987.jpeg

bit those prices are a bit spicey having spunked this months budget on the numberplate. 

maybe ebay will come up with an answer ?

49033CE6-001E-4E46-B9E9-B52D38B8ED24.thumb.jpeg.97d367fd36b929863f41858b7f2cfbb8.jpeg

£20 + postage, untested, sold as spears and reapers - i’m up for a gamble :) 

obviously they are cheap chinese knock offs and come with no instructions at all but at that price, i couldn’t say no.

so, we’re doing this again 

3DC83BB5-4AFD-4902-9343-20DA4AB60E65.thumb.jpeg.cae4d5e0a1add3d4c35b88151d178df2.jpeg

a bit of googling had me the wiring for a genuine Koso unit, unfortunately, as this is as genuine as a £3 note, that didn’t help :( 

trial / error / educated guesswork got me a few clues but i was struggling. 

maybe there will be a model number somewhere inside ? 

ooh, we have a bingo !

04F2A76B-EE7A-45D7-A846-E1C1C0457100.thumb.jpeg.54eb584f3e76249726348db293f2d605.jpeg

E9C6EA92-20EE-4152-A1A2-A1013CA9B074.thumb.jpeg.dc2c5b3bde1649b1b0be863c82a20e1d.jpeg

this made me very happy

i hooked up the speed sensor and wiggled the magnet in its face and it responded (no pic as not enough hands)

FEE61BA3-C7C4-46F8-967D-F13B55400863.thumb.jpeg.a9db014af17082b41627e386db5e4116.jpeg

then i remembered a spare fuel sender from when the fuel pump died

CC4E6536-B6AA-4B83-9A76-541439397007.thumb.jpeg.19d9180eb5194f73196ac5e4254af60a.jpeg

762E4C1B-8890-4A8B-B32E-9CDB1D770B0B.thumb.jpeg.a5b1ce5a32b94d9e9654517f0119e300.jpeg

EDC23B60-1F1D-4B2E-8EE5-96D8762883DB.thumb.jpeg.139dd0cc375abccef4a1e145cd05c25f.jpeg

but the big question was how in the hell to program the thing ? 

nothing i could find on the web would work, i eventually stumbled upon this

24179EC3-A48F-4329-860F-49B2EA746469.thumb.jpeg.031e96405695a342159a7a8870fb861a.jpeg

some sort of pin code ? ok, this may take a while

except it didn’t, i started with 111, then 222, turns out that 888 is my lucky number :) 

1A9CAC4D-DAC7-4A0F-B0A0-211C56545C86.thumb.jpeg.168ff7b4b7a8a142f8992dd881be40ec.jpeg

that is 14volts btw 

so we’ve got speed and fuel sorted, let’s have a go for revs

the mk1 mx5 has a very handy ignition pulse in the diagnostic connector, i pinged (pung?) open the Exo’s wiring tray and got hooked up

38EBB767-7503-47D6-B98D-D8BED148B04E.thumb.jpeg.41976e1f3a177d41cfabcc11e72d5cbd.jpeg

ok, fire it up 

not sure about that very digital needle movement but for a tenner each (yes, the other one works too) i’m pretty pleased with that.

should make a big difference once fitted

A2D57147-BD68-4B96-8A17-D889FA56BF20.thumb.jpeg.299cc853605efbf4d1f91f810dc692fb.jpeg

then i can get the windscreens on

just call me the King of Speedos !

just not like this guy

 

Link to comment
Share on other sites

  • gm changed the title to gm's unhealthy obsession with mx5s - King of Speedos !

Exo also attended its first car meet at the North East Restoration Club, held in Washington, Tyne and Wear, first wednesday of the month.

02E0FF91-B117-4C89-81CC-2A301D092A5F.thumb.png.3deee3be6bf30e556c5918a15c1a948f.png

CC03B4E8-F2BB-46ED-86FD-E23624EDA45F.thumb.png.de0b0389608fea223efb9ff0d5361751.png

9EC17A0A-6470-4BCD-9134-5D146D895634.jpeg.7434b744cc9e8f6adb1742fa45e2a035.jpeg

this gives a good idea of the variety of cars there and a really friendly bunch of folks 

 

Link to comment
Share on other sites

the postie delivered me a red card of doom yesterday so i made a trip to the depot on my way to work today and collected more parts.

despite getting home at 22:30, i couldn’t resist a quick test 

first up an oil pressure switch (using the mil light as there isn’t an oil light) is certainly telling me there's no oil pressure right now :) 

966937DA-9FB6-4389-B1EE-5F6CCD29FA86.thumb.jpeg.64420b7c19941fd16049e32abc83ab4a.jpeg

next up is the speed drive - my mk1 gearbox has a mechanical drive but i’m told a mk2 electrical drive will swap right in

best test it first - fetch the drill (yes, that drill ) and give it a spin

55C44455-5AF2-4E95-B721-9703EAEC6F81.thumb.jpeg.56cd6e23118d0acb7e80d1852ac9bd3a.jpeg

more beans

2FD42833-2FFF-449C-BBAD-DAFAD3A2254E.thumb.jpeg.7e0841a76dbb6cb0a75b593eceeffef3.jpeg

maximum beans

D1047715-3B23-4DA7-9C25-0DB26E80DE92.thumb.jpeg.17555a6e76e0cc645c7a20ddb352f588.jpeg

excellent, it bloody works !

calibration might be a challenge but i figured out the sender gives 8 pulses per revolution, somehow i need to translate that into rotations of the wheels 

so i’ve got most dashboard functions accounted for, just temperature and volts to go and i can have a go at installing the damn thing :) 

Link to comment
Share on other sites

more tat essential components arrived this morning

4B54AA91-5801-42CB-B6CC-812AB3C1BBE3.thumb.jpeg.7aad641a0e6049c058773a5298789711.jpeg

it’s a neat little gauge but i wasn’t expecting the message printed on the top of the screen - i wonder what it says ?

BE3FB141-AECE-4586-92C9-13706C1F8FCE.thumb.png.af59f6932751b4101eb15e667aa5ff41.png

no chance of confusion there then

let’s get it wired in and see how it looks

EDBA18EB-1B0C-4FE0-ADE8-A551E32E402E.thumb.jpeg.09f8d411da4f5854a5b208cc65dc7ef8.jpeg

not too bad, it is pretty warm in the garage today 

coffee 53oC seems about right

61E7EC8A-31E4-4E79-9FA8-62B6A5A22B5D.thumb.jpeg.a3f0d771de26d445721fb9a9691d605d.jpeg

freshly boiled water 87oC is maybe a tad low but in the right ballpark

DFDDB6C5-2848-4293-A226-114B32882262.thumb.jpeg.473189a4a076fa3ec9f9ccf6669f0531.jpeg

fire up the heat gun and test the alarm

83302E2C-E5B5-4002-8CBC-89BCD03DAE44.thumb.jpeg.f65e1df0ce775da6927f5e530ba44561.jpeg

it starts flashing and beeping over 95oC although seeing as i can’t hear the exhaust for wind noise, the beeper might struggle :) 

only a few more bits needed and i can look at installation 

Link to comment
Share on other sites

Good work! I'd be tempted to wire the oil pressure light to a separate (red!) light elsewhere as, because you're used to Japanese vehicles, you'll be well used to the orange glow of an EML so may well miss the engine shitting itself assuming it's just because the lambda sensor woke up grumpy. Again. 

Link to comment
Share on other sites

https://www.ebay.co.uk/itm/374199581999?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=JNSNfwAMQ4S&sssrc=2349624&ssuid=LKn5X0MqTxu&var=&widget_ver=artemis&media=COPY

there seem to be plenty of similar ones available, i messed up and ordered an M10 probe but should have gone for a 1/8npt, some bodgery may be required :) 

Link to comment
Share on other sites

Bit of an odd range on the temp gauge.  Looking at the two I can remember off the top of my head which show numbers, there's the one in the Caddy which reads 50-130C (about 1/2 a needle's width below 90C being normal running), and in the Xantia which read 50-110C, normal on that being around 70C l, though the cooling fans didn't kick in until around 90 in traffic.

IMG_20220813_105141.thumb.jpg.c1fee9a17ff8ec76504d78aeb5a38a1c.jpg

IMG_20220815_185319.thumb.jpg.1755b9d51b49cbe2c26d284fbf80a7fe.jpg

Will still work obviously but could cause a little undue alarm given how close to the red bit you're always going to be.

Link to comment
Share on other sites

the mx5 gauges don’t have a scale, but tend to hover in the middle unless things are going particularly wrong

34AC3CB1-81E8-4CD8-B4C5-7CCF36F7BCEB.thumb.jpeg.9fe9f7df7e931afb577d4c7d4bd0172a.jpeg

8C078AFC-5A60-488D-BF08-7FD24C6F83DE.thumb.jpeg.2c5c3d4108228a2fd0dbdc5f1a1e2a02.jpeg

the only time i’ve seen this one move from its central position was moments before this happened

743199A5-ED1A-4085-8596-7C5B79BC35D7.thumb.jpeg.4a816ccca3f61bb2e447367052965786.jpeg

maybe a little more warning would have been handy :) 

4907EBAF-E24E-40A6-AD42-D955CEB92D09.thumb.jpeg.ad6f8a749e173632c007777221273c8e.jpeg

i’ll see how this one works out, nothing is exactly permanent where the Exo is concerned so, if it’s a pain, i’ll find a plan B

Link to comment
Share on other sites

  • 2 weeks later...
  • gm changed the title to gm's unhealthy obsession with mx5s - bank holiday hooning !
  • 2 weeks later...

the mx5 got its annual bath 

7C352A25-F39E-45E4-9B2C-AA306D9A5709.thumb.jpeg.7b445e4af3abce787d754e67e0ed8558.jpeg

scrubs up pretty well

EE7CD4BD-E881-4DBA-8D8B-CF481D2DFF10.thumb.jpeg.c8820b0baf3716d359641ec50346e05b.jpeg

then me and @DVee8 convoyed to a local car meet

34532FFB-DBE2-42CD-93AA-870C520DCBD8.thumb.jpeg.91eaeffd104fac13006fb98d40ae6197.jpeg

where they both attracted a good bit of attention

me and dvee8 jr got papped on the way in

1E6463E7-6993-4E37-94C7-C508575ED4BE.thumb.jpeg.37810788acda567a58922f588464d702.jpeg

FC937F22-E30D-48E6-B870-99867CE64ADD.thumb.jpeg.5f37eac5abbd5601bcc0f97919f3c97c.jpeg

the journey home involved a bit of a detour and some serious hooning - great fun :) 

Link to comment
Share on other sites

the exos odometer is showing 1751km so i’ve racked up just over 1000 miles in its first two months on the road - time for an oil change

access is certainly a lot easier :) 

F2CE724C-9952-4226-AC94-543CE4B06F4E.thumb.jpeg.780ee035ca5022c23617b36d7fc4d713.jpeg

service history updated 

CFB12253-A068-4DD4-9B67-F8888A2EF32E.thumb.jpeg.fa8451a6cd45f4cc39ffc0935b1fd0fc.jpeg

and i gave the engine a quick clean - shines up a treat 

82AC9661-4DEA-48AE-A2B7-59692B7C7AC1.thumb.jpeg.5de200b5564ecf04144ed69a67dbc4fa.jpeg

the two month old oil was pretty dark, glad i didn’t leave it any longer. i’ll maybe do it again before it comes off the road for winter.

Link to comment
Share on other sites

i’d booked the day off for a trackday but seeing as it was chucking it down, i spent the afternoon in the garage instead.

let’s have a go on these “windscreens” then

F4C2DDC2-432A-4106-A62A-5D52E98E9599.thumb.jpeg.be70680fbb15c38385b3a54720761462.jpeg

needed a corner chopping off for a good fit

476FB8AB-DE14-4612-96FC-54BA6D8FD047.thumb.jpeg.ab1bc30f56af1197c7e68d55aacd0716.jpeg

holes drilled with laser precision ! and no injuries

853688E2-B583-4A16-A04D-9BFE0265B9BD.thumb.jpeg.4c79334fd9d2423dbc692b7203f094b6.jpeg

passenger side fitted

7F827E08-7068-4BFA-B75A-82AB712DCF4E.thumb.jpeg.d55f20efa79a2552a8ebad303509f43a.jpeg

same again for the drivers side but hit upon a minor problem

51CEC8F2-7C40-4A12-818F-52FB5AC20004.thumb.jpeg.4702f1cd4777fd70ace685a994d5c2c9.jpeg

the bonnet won’t open anymore :( 

D29EA2F1-549C-47E9-B9E2-72FA4B5BE504.thumb.jpeg.7e5eddcdbe2d3292b9d6b9c216af0bf2.jpeg

i knew this would happen but will be solved when i fit the digidash 

looks pretty good though

42EBA8A0-9D50-4343-B7CF-F897F6FA3A78.thumb.jpeg.61f0629b6bc95bfd7bbef30c07f9810b.jpeg

14E39D88-96EC-4DB7-8C2B-6C5EBFC055EE.thumb.jpeg.2f6bcb0845f4b58a3b61ebc0031c6ac9.jpeg

5C4AF3C7-0279-4B92-A968-85F0716F8CA1.thumb.jpeg.7b4011dadf4ac33c7e1227ff9deb49f0.jpeg

D2AAC3A5-DE06-45F1-9F41-E8C6B56B5140.thumb.jpeg.0ff98114455d86ce7e970ffb98c0ec62.jpeg

and the big question - do they make a sod of difference ? 

a quick test hoon was deemed necessary, and the verdict is a thumbs up 👍 there is a noticeable drop in wind noise and it’s not quite* as cold :) 

passengers should feel the most benefit, i shall locate a volunteer and report back in due course 

Link to comment
Share on other sites

  • gm changed the title to gm's unhealthy obsession with mx5s - screens of win(d)

it crossed my mind that i should check my tyre pressures on the exo - 24.5psi on the front and 24.0 on the rear were both a tad low (and probably contributed to my heavy steering feel) so knocked them up to 28 all round and went for a drive. the difference was immediately obvious, the steering felt much better but the back end was much looser than previous, i’ll probably drop them to 26 and see how it goes.

the sun was out so i headed for the coast and had a pleasant drive along the sea front from sunderland up south shields, through the tunnel then rejoined the coast from tynemouth through whitley bay and on to blyth 

53A28743-DB2B-4128-8DF1-B48BABAB2B5C.thumb.jpeg.7e1ba78f9ae868c4ada9cc24c13a417a.jpeg

had a chat with a bloke who had “always wanted to build a kit car”, the dirty looks his wife was giving him across the car park perhaps explained why he had not achieved his ambition !

stopped for a mcpiss in the way home :) 

D3A21119-27FF-4E55-87E7-98325BA0D2EC.thumb.jpeg.8dfdedaa9aca332b1b12f563c7416d19.jpeg

I'm loving it !

Link to comment
Share on other sites

4 minutes ago, gm said:

err, i could try :) 

unfortunately, me mam says i can’t have a bike as they’re too dangerous !

fwhahahahahahahahaa

i had this when i was 19 - massive hypocrisy as the old man started on lambrettas and mum used a 70s pedal honda to get to work so obvs the no was ignored :D

26 years this year :D and after 40 years the old man passed his test in 2005 :D

i think he was jealous :D

 

Link to comment
Share on other sites

Just followed one of these through Buckingham.  Blue one on an 03 plate - with cardboard rear number plate and no brake lights.

Does look a massive amount of fun.  Photos really don't give a proper impression of how bloody low it is.

Though I still stand by my original thought that it needs a different exhaust now it's through the test as the factory one just to my eye looks really awkward.  

Link to comment
Share on other sites

i didn’t like the exhaust at first but it has grown on me, it can stay for now. at some point i’ll probably upgrade to a custom job which might just coincide with a turbo installation :) 

quite a few have fitted bike exhausts, some look better than others - but now the test is passed, i can pretty much do whatever i want, doesn’t need an mot until  june 2025 !

Link to comment
Share on other sites

As the sun was shining yesterday, me and @DVee8 took the Exo out for a blast 

the route was something like this, I'm not exactly sure as I was following dvee8s excellent directions, but involved some of the finest driving roads the region has to offer :)

IMG_2196.thumb.PNG.e604cc065b320775910fe8092fc935fd.PNG

we stopped for pics several times, much to the amusement of a couple in a campervan who we kept overtaking

IMG_5613.thumb.JPG.eb162e21bef0023481cd9d5c6c3ed3f7.JPG

IMG_5614.thumb.JPG.d90e565cea0e75822fb6ecb07a5fe201.JPG

Cumbria

IMG_5615.thumb.JPG.a66a41c406ca8024ff4b4ea8c41b91ba.JPG

County Durham

IMG_5616.thumb.JPG.9271507ebf80439697e633b39e7cbeb0.JPG

looking down into the valley near Brough

IMG_5617.thumb.JPG.5961e327f27bbbed1d48d6def4e63e66.JPG

amazing clouds today

IMG_5621.thumb.JPG.6e0a26ebfeddf5971bab42e23a59faf8.JPG

ace photographer at work

IMG_5619.thumb.JPG.b1ba6d3e40f99a250fba12dd43f7639f.JPG

on the way back, we stopped in Barnard Castle for a coffee and an amazing meat pie - mince, gravy and minted mushy peas sounded a little odd but tasted great - the shop appropriately named "De-licious" 

we sat in a bench and had fun watching people's reaction to seeing the Exo parked up over the road, I think mum spotted us as dad and son were having a good nosey around the car :) 

IMG_5620.thumb.JPG.5a3ca0395fe19de2305fcb5ec9e7e685.JPG

coffees and pies finished, we headed back to the car and spotted this beauty coming round the corner - the driver gave me a big thumbs up when he saw me taking pics :) 

IMG_5622.thumb.JPG.849210a8483fc710add19e1f94da049d.JPG

IMG_5623.thumb.JPG.e9e8e0151033766cf5fc66bd7fa71e3e.JPG

further hooning occurred on the return journey, the Exo notching up 180km in an afternoon and relishing every one of them.

thanks to @DVee8 for a smashing day out, some excellent roads and for great company. 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...