Jump to content

gm's unhealthy obsession with mx5s - unlowering the green machine


gm

Recommended Posts

Good idea, I’ll bear that in mind if I need a few extra mm, thanks. 

Now lockdown is easing, I’ll need to get that engine hoist back to you - not quite sure how I’ll do that in an mx5 - I may need to borrow something more practical from the family :) thanks again for the loan, it proved very useful.

which seems like a good excuse to post this pic again 

5320C329-6992-4629-8CAB-DBF91AD8AE39.thumb.jpeg.9892f52c48f01b501e9a7f0963025eee.jpeg

 

Link to comment
Share on other sites

1 hour ago, gm said:

Good idea, I’ll bear that in mind if I need a few extra mm, thanks. 

Now lockdown is easing, I’ll need to get that engine hoist back to you - not quite sure how I’ll do that in an mx5 - I may need to borrow something more practical from the family :) thanks again for the loan, it proved very useful.

which seems like a good excuse to post this pic again 

5320C329-6992-4629-8CAB-DBF91AD8AE39.thumb.jpeg.9892f52c48f01b501e9a7f0963025eee.jpeg

 

I've used that trick loads on 4x4s and works very well.

If your struggling with a vehicle I can pop down for it some time if you like unless anyone else wants to use it first.

Link to comment
Share on other sites

a post appeared on a local mx5 fb group with a member offering some parts before he took them to the tip

183414194_10165092495320181_350304435036169029_n.thumb.jpg.53fc90da48a19c00705d899f03b12e86.jpg

I couldn't believe my eyes !

that is a mk1 manual steering rack - not very common at all - which would be perfect for the Exo. I currently have a de-powered steering rack fitted which is ok but the ratio on a manual rack is a much better option.

I sent a message straight away, attaching a pic of the exo to grab his attention and promising to bring a box of beers with me !

It worked and I arranged to nip down to Teeside yesterday afternoon and pick it up - One thing I hadn't counted on was it still having the hubs attached which made it rather awkward to bundle into the mx5. 

IMG_5600.thumb.JPG.c44fb2f32253bdc1729445decf2de0da.JPG

As I was heading that direction, I made an offer on a set of steelies I'd been watching on marketplace. These were also squeezed into the mx5 and brought home safe.

Keen readers will know that I already own several (four actually) sets of Bini steelies, one set of which was due to go for powder coating to become the main set of Exo wheels - no need for expensive powder coating when I have this set of delivery mileage beauties ready for tyre fitting next week :) 

IMG_5599.thumb.JPG.e207f23a6a895e64f88864491670023c.JPG

there are a few tiny marks but I'm happy with that

IMG_5601.thumb.JPG.17989fa89eb1fff8c01af93c6ecd0ff9.JPG  

as for that steering rack, it might need a bit* of work before fitting

IMG_5602.thumb.JPG.10d7556691e8d8a5f13f189d9b8393ed.JPG

a quick going over with a wire brush and it shows potential

IMG_5604.thumb.JPG.2d982af6391bce13a3937eeb9a031660.JPG

looks better already (excuse the accidental jazz hands) 

IMG_5614.thumb.JPG.5a4cd1ec1cfad8dcd33e26d5e884b9f5.JPG 

I'll give it a proper clean up and paint during the week and order new tie rods & ends

so big thanks to Dan (steering rack) and Dean (steelies) down in the 'Boro

 

Link to comment
Share on other sites

when I got home last night, I plipped the fob to lock the mk1 and heard a not good noise from somewhere inside the door

a tentative pull on the handle revealed something was indeed buggered - no matter how many times I plipped the button or tried the key, the drivers door would not unlock :(  

going in from the passenger side didn't help either - only one thing for it - things need to come to bits 

dropping the window allowed me to see what is going on - right in the middle of the pic, you might just make out "that bloody spring"

IMG_5608.thumb.JPG.6f9e03ca40519b1614c48405d75741bc.JPG

a common problem with mk1 mx5s, albeit one I've been lucky to avoid so far. 

a bit of poking around with a wire coat hanger I keep for such emergencies got the door open, it was then a case of taking out the window glass and runner to retrieve this little bugger

IMG_5610.thumb.JPG.2ff2b149eefd524f1af44c24b9964f77.JPG

and where exactly am I supposed to get one of these late on a Sunday afternoon ? 

and also, where is it supposed to go back ?

IMG_5611.thumb.JPG.9030c77d2ad8354d4367beae64fb3174.JPG

IMG_5609.thumb.JPG.331cf9abd39f4d8c548d8ece782be758.JPG

I bent the end into a new hook, had a poke around and the job's a good 'un !

IMG_5612.thumb.JPG.9b02c8bc6d3929ee11cbe62c02209495.JPG

a quick test and it's working perfectly. result.

I managed to get the glass and (freshly greased) runners in and the door back together just before it started thoroughly pissing it down :) 

And I saved £4.08 (didn't need to remove the lock either) 

638717925_ScreenShot2021-05-09at19_27_46.thumb.png.9fb022b54fd46bb3ae3fb59c3f14bdc8.png

 

 

 

 

Link to comment
Share on other sites

  • gm changed the title to gm's unhealthy obsession with mx5s - a Rusty Rack, some Shiney Wheels and "that bloody spring" !

 I've had a fairly productive couple of days

that manual steering rack that looked like it has spent a long time at the bottom of the sea

183414194_10165092495320181_350304435036169029_n.thumb.jpg.351f9c0bf9c3fcbe5e3a4ecd85027d67.jpg

is now much improved

IMG_5627.thumb.JPG.4cc307abb0fa5447ca5e0229b0904a2c.JPG

I got it fitted and roughly set up the alignment

IMG_5630.thumb.JPG.1cf2fc30788a13232887040fac1edb5b.JPG

meanwhile, @DVee8 gave me a lift up to see his tame tyre fitter and we dropped off my shiney bini steelies and a fresh set of track tyres (nanking ns-2r 195 50 15)

IMG_5599.thumb.JPG.3011966db8ff15efa66e77b0d6de8768.JPG

IMG_5613.thumb.JPG.8c6788809b2f2ddb821e15bef0d74261.JPG

how smart does that look ?

IMG_5631.thumb.JPG.c85eecca3109041b58640b29d0a60ac8.JPG

I had a sneaky drive up and down the road to test the new steering rack and it is much improved, I am so lucky to have saved that from being dumped as scrap

IMG_5632.thumb.JPG.589d5a294f2b0eb6ec1b91830212d85c.JPG

IMG_5633.thumb.JPG.1f0e903fe931b383c5cfee079a1847c9.JPG

IMG_5635.thumb.JPG.454e0ed0ca22dc39ddabc50cf973da68.JPG

yes, that is a little puddle under the radiator :( fortunately just a jubilee clip needing tightened

IMG_5636.thumb.JPG.521292ebd3ec558f8c4e8e6a96c29979.JPG

 

Link to comment
Share on other sites

Trackday time again this evening down at Teeside Autodrome

I set off from home in brilliant sunshine with the roof down, by I was half way there, the heavens had opened :( 

no longer having a roll bar fitted, I tried a new camera set up 

IMG_5668.thumb.JPG.09d3beaec64ead9b6801bcc87d064e93.JPG

with the mic stashed under the bonnet for induction roar*

IMG_5667.thumb.JPG.963da96894960f570e7ae92e476fcb1a.JPG

I'm not even going to bother uploading the results - heres a screen shot

1946607871_ScreenShot2021-05-17at20_16_41.thumb.png.f8ba0f0b11b1b2d3b4b646cf5d258530.png

moar height needed next time :( 

instead, heres some pics of other peoples mazdas

IMG_5660.thumb.JPG.bdb28b9b91f6b7a37aef3d259a80280c.JPG

IMG_5662.thumb.JPG.96fea84b115e5879cf194abdcd7c03c3.JPG

IMG_5666.thumb.JPG.f4071c4d50efdbf1b270f7409dd2fac3.JPG

IMG_5665.thumb.JPG.defe01cd09ed46cd31323b9dce5a511e.JPG

it was indeed pishing it down and the track seems to be getting more and more slippery, it turned out someone had been dropping oil all over the place. 

The organisers sent out some sort of road sweeper device to clean it up but it looked like it might take a while so I packed up and went for a maccyD's

Still, the little black mk1 did itself proud as always, even if there was feck all grip :) 

 

Link to comment
Share on other sites

  • gm changed the title to gm's unhealthy obsession with mx5s - trackday washout :(

nice looking wheels but they are 16"s so tyres tend to be a bit pricier - and I tend to use quite a few tyres :) 

and five spare sets of wheels is plenty for me to be tripping over in the garage already !

Link to comment
Share on other sites

so, what has been going on with the Exo recently ? 

some fancy new bolts turned up so I replaced the tank cover fixings

IMG_5696.thumb.JPG.4d16172de0ddf70bb77965418abbc586.JPG

much better

IMG_5697.thumb.JPG.0bedbb6ac4d8ab37774631ba416cff43.JPG

then it was time to work on that dashboard cover again

a cornflake box template was made 

IMG_5698.thumb.JPG.c027d42439e30bd04268446172feface.JPG

and I got busy with the craft knife

IMG_5699.thumb.JPG.b8d80a5d83b5111a97b2cb66163b139e.JPG

IMG_5700.thumb.JPG.589d0b5184cb8fcbe2af6bb04355b37f.JPG

IMG_5701.thumb.JPG.398111168862f414b34c8fc34af71d84.JPG

IMG_5702.thumb.JPG.5ba59eeb7ca80bc061368324c4784b54.JPG

all this so the rear of the gauge cluster can be protected

IMG_5404.thumb.JPG.6cedde058dfb9440b80e381ec7dc0e1d.JPG

not the best pic but I'm happy with that

fullsizeoutput_30f.thumb.jpeg.f50c7e6e77b024daa2b0a9a8410bdfd5.jpeg

Link to comment
Share on other sites

the drivers door speaker on the mk2 stopped working a couple of weeks ago, with the car being collected by its new owner soon, I thought I'd better take a look

IMG_5730.thumb.JPG.75f1a80b29de990ed603ebedb416c3cf.JPG

I popped the speaker out and tested it - not a peep - so a replacement was sourced from the mazdadudes down in darlington

having booted it down the A1 to make it in time for closing, I had a nice relaxed drive home along the back roads

during which, the old speaker came back to life. very odd, must be a bad connection somewhere.

I changed it over anyway and took another test drive, this time in luxurious stereo :) 

IMG_5729.thumb.JPG.921406d862cdebfba961ccdae96d7daf.JPG

naughty speaker

this car has been washed more times in two months than the black one has in as many years

IMG_5732.thumb.JPG.172ccec594846139e5b65d86eceea594.JPG

mmm, shiney 

Link to comment
Share on other sites

  • 2 weeks later...

I had an NC for a while, which was a good car apart from the sheer amount of oil it could burn. On a hard drive or a track day it could do a litre in 100 miles! Turned out to be the PCV valve, which on an NC is under the inlet manifold and an absolute pain-in-the-arse to get to, although the part was IIRC £7 from my local Mazda dealership.

 

Your cars look much nicer than mine was. It was a great car to drive and gave me a serious addiction to two seater, convertible sports cars. I race a Ma7da Locost, which has the engine and gearbox from a 1.8 NB so I still have a connection to the MX-5 world. Big soft spot for them. I've actually never driven an NA or NB but would love to - they seem like the purest MX-5, more than my NC 2.0 was.

 

Overall, good work. I'm enjoying it!

 

Edit to add: my current daily driver is a Jaguar S-Type 3.0 and a Rocketeer conversion on an NA or NB has crossed my mind! Overall I think that my S-Type isn't the right donor since it's a nice one with a manual gearbox which is pretty rare. I'd rather kill a bad automatic one than a nice manual

Link to comment
Share on other sites

3. I started work on the side panels

lifting the car saved much backache 

IMG_5830.thumb.JPG.b9ba0318fda1d065dcdda05541a03221.JPG

the kit includes two sheets of "foamex" which need cut to size, obviously a total fanny on

IMG_5831.thumb.JPG.d138ffa0a55587b3559efe10ff0a7511.JPG

a couple of hours and lots of measuring and trimming later

IMG_5836.thumb.JPG.27d3253631b246c9cda4ee7295620980.JPG

IMG_5837.thumb.JPG.3a177f42e46e199ff9f7412a531c33a2.JPG

IMG_5835.thumb.JPG.28e1704524027104e4dc68d0efc8d16c.JPG

looks ok

IMG_5834.thumb.JPG.df3327f584e1103a6b03e11e6ebaeb52.JPG

there is a protective film on them, the true colour is much darker and will look better.

having spent so long on the passenger side, surely it's just a case of copying the shape for the drivers side ? I mean, both sides will be symmetrical, won't they ? 

will they bollocks :( 

close but not quite close enough - a job for another day 

Link to comment
Share on other sites

5 minutes ago, horriblemercedes said:

I had an NC for a while, which was a good car apart from the sheer amount of oil it could burn. On a hard drive or a track day it could do a litre in 100 miles! Turned out to be the PCV valve, which on an NC is under the inlet manifold and an absolute pain-in-the-arse to get to, although the part was IIRC £7 from my local Mazda dealership.

 

Your cars look much nicer than mine was. It was a great car to drive and gave me a serious addiction to two seater, convertible sports cars. I race a Ma7da Locost, which has the engine and gearbox from a 1.8 NB so I still have a connection to the MX-5 world. Big soft spot for them. I've actually never driven an NA or NB but would love to - they seem like the purest MX-5, more than my NC 2.0 was.

 

Overall, good work. I'm enjoying it!

I've only briefly driven an NC, felt so much more grown up compared to my mk1 - I couldn't give it the beans as the owner was sat next to me and had only just bought it the day before - it did feel like it had plenty of oomph though :) prices of those are becoming very tempting now

 

the ma7da locost sounds interesting, I bet it is an absolute hoot to fling round the track - I'm no stranger to trackdays but have never had the opportunity wealth cojones to give racing a go, I should seriously stick it on the bucket list 

Link to comment
Share on other sites

Just now, gm said:

I've only briefly driven an NC, felt so much more grown up compared to my mk1 - I couldn't give it the beans as the owner was sat next to me and had only just bought it the day before - it did feel like it had plenty of oomph though :) prices of those are becoming very tempting now

 

the ma7da locost sounds interesting, I bet it is an absolute hoot to fling round the track - I'm no stranger to trackdays but have never had the opportunity wealth cojones to give racing a go, I should seriously stick it on the bucket list 

I bought my NC in March 2019 for £1700 and did two Nueburgring trips in it and a few track days. It had some rust issues and that oil issue.

 

As you observe, it does feel more grown up than I imagine an NA or NB would. I have read that it was the first MX-5 that was designed for the West - ie it abandoned some of the principles that Mazda originally wanted in order to make it a more commercial product. Still a car with great handling, but I think an NA or NB would be more pure and thrilling.

 

Racing is an expensive game for sure. If you ever fancy a track day in the Ma7da, I'm sure that could be arranged. Let me know :) The old Locosts with their wheezy 1300 Ford crossflow engines and weak four speed gearboxes were ok, but the Mazda 1800 engine and five speed gearbox was a game changer for them. If you'd like to come as a guest to one of the race weekends, that would be fun too

Link to comment
Share on other sites

4. mother gm was tending to her garden last week when she had a bit of a surprise - she quite reasonably assumed that I had somehow got the Exo finished and had turned up for a surprise visit as she saw this chap pull up at the bottom of her driveway

1538794390_Image08-06-2021at00_56.thumb.jpg.7427a0ac328c547fc3efd41b040b3e2a.jpg

she went down to investigate and discovered he had randomly stopped outside her house to wait for his mate who was fueling up at the BP down the street ! 

[harryhill] what are the chaarnces ?/[harryhill]

a pair of MEV Rockets, out for a blast in the sunshine :) I'll need to stalk them on the forums and figure out who they are

Link to comment
Share on other sites

5 minutes ago, horriblemercedes said:

I bought my NC in March 2019 for £1700 and did two Nueburgring trips in it and a few track days. It had some rust issues and that oil issue.

 

As you observe, it does feel more grown up than I imagine an NA or NB would. I have read that it was the first MX-5 that was designed for the West - ie it abandoned some of the principles that Mazda originally wanted in order to make it a more commercial product. Still a car with great handling, but I think an NA or NB would be more pure and thrilling.

 

Racing is an expensive game for sure. If you ever fancy a track day in the Ma7da, I'm sure that could be arranged. Let me know :) The old Locosts with their wheezy 1300 Ford crossflow engines and weak four speed gearboxes were ok, but the Mazda 1800 engine and five speed gearbox was a game changer for them. If you'd like to come as a guest to one of the race weekends, that would be fun too

yes and yes ! what part of the world are you in ? please say up north (although it would be worth a road trip)

 

 

Link to comment
Share on other sites

Just now, gm said:

yes and yes ! what part of the world are you in ? please say up north (although it would be worth a road trip)

 

 

I'm in the West Midlands. I notice you're in Chester-Le-Street. At some point we are bound to be at Croft so I could let you know when?

I'd also love to see your Exocet. They're seriously cool things. I'd happily make a trip to see that or even offer help! My skills aren't great though

Link to comment
Share on other sites

Croft is only an hour away, i'd definitely be up for a trip down to see the racing. A few years back, I did an mx5nutz trackday there which was a lot of fun - they were battling with noise issues at the time so were very strict with sessions and dB levels but we still enjoyed ourselves. 

my 1989 mk1 eunos

IMG_0041.JPG.07df0ba7cad1eb37df743ce9e625300f.JPG

 

Link to comment
Share on other sites

4 minutes ago, gm said:

Croft is only an hour away, i'd definitely be up for a trip down to see the racing. A few years back, I did an mx5nutz trackday there which was a lot of fun - they were battling with noise issues at the time so were very strict with sessions and dB levels but we still enjoyed ourselves. 

my 1989 mk1 eunos

IMG_0041.JPG.07df0ba7cad1eb37df743ce9e625300f.JPG

 

Very cool! I haven't been to Croft yet but have a great anecdote from a Locost friend who was racing there in 2019. Do you still have the Eunos? Sorry if it was covered, I haven't read every page of the thread

Link to comment
Share on other sites

3 minutes ago, horriblemercedes said:

Do you still have the Eunos?

sadly that one suffered "short nose crank failure" and went to live on a farm. but I've had another four since then - can't imagine not having one to be honest, I tried to sell my current mk1 last year and got cold feet (thankfully)

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...