Remspoor Posted August 29, 2020 Share Posted August 29, 2020 1 hour ago, dollywobbler said: Phew. Another van load of crap collected today. Space is going to be tight! I need to get rid of a lot of crap. Like BX headlamp lenses. I have three of them. Why?! Because LightBulbFun and St.Jude 1 1 Link to comment Share on other sites More sharing options...
2cvspecial Posted August 31, 2020 Share Posted August 31, 2020 https://citroencarclub.org.uk/club-events/gs-a-ami-rally-2020/ Link to comment Share on other sites More sharing options...
dollywobbler Posted September 1, 2020 Author Share Posted September 1, 2020 Sadly I don't think I'm going to make it to that. GSA seems to have a gearbox oil leak. Also still very busy trying to sort my shizzle out. I think I'm starting to make progress. Might actually be able to start fixing cars again! The 2CV would be far better with working wipers. Still need to do another round or two of sorting and stacking, as I can't get the Fox in at the moment. Matiz is now behind the Invacar. Progress though. My back is in absolute tatters. Six-cylinder, BL Bloke, Remspoor and 1 other 4 Link to comment Share on other sites More sharing options...
catsinthewelder Posted September 1, 2020 Share Posted September 1, 2020 On 8/29/2020 at 4:40 PM, dollywobbler said: Phew. Another van load of crap collected today. Space is going to be tight! I need to get rid of a lot of crap. Like BX headlamp lenses. I have three of them. Why?! Sorry, they probably arrived with the blue estate as I was given about 9 with the white one ? Link to comment Share on other sites More sharing options...
St.Jude Posted September 1, 2020 Share Posted September 1, 2020 51 minutes ago, dollywobbler said: Sadly I don't think I'm going to make it to that. GSA seems to have a gearbox oil leak. Also still very busy trying to sort my shizzle out. I think I'm starting to make progress. Might actually be able to start fixing cars again! The 2CV would be far better with working wipers. Still need to do another round or two of sorting and stacking, as I can't get the Fox in at the moment. Matiz is now behind the Invacar. Progress though. My back is in absolute tatters. What's the craic with the tyres at the back? Won't they need to be removed at some point? colino 1 Link to comment Share on other sites More sharing options...
colino Posted September 1, 2020 Share Posted September 1, 2020 Unfortunately if it was commercial premises it would be an insurers excuse to decline a payout as you have failed to carry out a risk assessment and remove unnecessary combustible materials. Then again, I once stored an e-type in a hay barn to keep it cosy. Link to comment Share on other sites More sharing options...
dollywobbler Posted September 1, 2020 Author Share Posted September 1, 2020 4 hours ago, catsinthewelder said: Sorry, they probably arrived with the blue estate as I was given about 9 with the white one ? That's worrying. I wonder where the other six are?! 3 hours ago, sgtberbatov said: What's the craic with the tyres at the back? Won't they need to be removed at some point? Probably. Not sure how useful that rack is for me though, so may just leave them for 'ambience.' Link to comment Share on other sites More sharing options...
St.Jude Posted September 1, 2020 Share Posted September 1, 2020 1 hour ago, dollywobbler said: Probably. Not sure how useful that rack is for me though, so may just leave them for 'ambience.' I was wondering more for all the tat you've lovingly placed near there that would need to be moved to get them out. Would be a good place to hold large items you hardly use though. Or fill with hay and get your inevitable side kick, given the agricultural setting - The HubNut Donkey* *trademark pending Link to comment Share on other sites More sharing options...
beko1987 Posted September 1, 2020 Share Posted September 1, 2020 Can't you knock them up into some shelving with plywood? Caveat, I've never been up and personal with a tyre rack... Gone through them to see if any fit the fleet? Link to comment Share on other sites More sharing options...
Eyersey1234 Posted September 1, 2020 Share Posted September 1, 2020 Nice to meet Miss Hubnut and SMOLL_Nuts in your video about the Vectra and 2CV @dollywobbler dollywobbler 1 Link to comment Share on other sites More sharing options...
dollywobbler Posted September 1, 2020 Author Share Posted September 1, 2020 7 hours ago, beko1987 said: Can't you knock them up into some shelving with plywood? Caveat, I've never been up and personal with a tyre rack... Gone through them to see if any fit the fleet? I think the tyres have mostly seen track or drift action... Link to comment Share on other sites More sharing options...
LightBulbFun Posted September 2, 2020 Share Posted September 2, 2020 On 01/09/2020 at 07:54, dollywobbler said: Matiz is now behind the Invacar. 9 months later... (pretty sure I or someone else made this same joke when you put em all in storage for your trip down under LOL) Remspoor, Eyersey1234 and 2cvspecial 1 2 Link to comment Share on other sites More sharing options...
wuvvum Posted September 2, 2020 Share Posted September 2, 2020 I remember having a dream years ago in which Austin Metros were available with either three or four wheels. It seems that my dream has now come true, except with Daewoo Matizeseses. BlankFrank, Remspoor, Eyersey1234 and 2 others 1 4 Link to comment Share on other sites More sharing options...
LightBulbFun Posted September 17, 2020 Share Posted September 17, 2020 funnily enough I dont normally watch these member vlog videos but decided to watch this one because my Invacar-spidey senses where tingling, looks like they where not wrong LOL I actually posted about WVW272S way back in April of last year (on my own thread), not a known survivor sadly but it was one of the few that survived until the end of the IVS scheme and so who's chassis Number I could pull with my then limited tools so its neat to see a picture of it 2cvspecial, BertiePuntoCabrio, maxxo and 2 others 4 1 Link to comment Share on other sites More sharing options...
dollywobbler Posted September 17, 2020 Author Share Posted September 17, 2020 Cool. Thought it might be up your street. So wish I'd thought to take pictures of them when I was younger. In other news, 2CV is back. What a transformation. Sparrow Automotive has fettled it into a great state! They sorted the oil cooler leak, cleaned up the brakes and with that done could then set about tuning it up properly. I knew the carb jetting was a mess, but it turns out there was a slight induction leak as well. Pete spent ages trying to get the carb to work properly,even modifying an emulsion tube in the end. The result is an engine that pulls really well, from far lower down the rev range. I can do 30mph in fourth, comfortably! There is an odd vibration that he wasn't able to get to the bottom of. He was initially worried it was bottom end, but he has given me another crossbox to try, in case something odd is going on there. That sounds preferable to a knackered bottom end, which was his first suspicion. Still lots to do with the 2CV. It's due a service, needs a repaired wiper linkage fitting, needs the headlamp switch replacing and then the bodywork needs some attention for rot is trying to creep in. Oh and Pete reckons I should start building up a replacement engine with a few more goodies. Power, Less is More. Maybe... Coprolalia, willswitchengage, richardmorris and 8 others 9 1 1 Link to comment Share on other sites More sharing options...
2cvspecial Posted September 17, 2020 Share Posted September 17, 2020 50 minutes ago, dollywobbler said: Cool. Thought it might be up your street. So wish I'd thought to take pictures of them when I was younger. In other news, 2CV is back. What a transformation. Sparrow Automotive has fettled it into a great state! They sorted the oil cooler leak, cleaned up the brakes and with that done could then set about tuning it up properly. I knew the carb jetting was a mess, but it turns out there was a slight induction leak as well. Pete spent ages trying to get the carb to work properly,even modifying an emulsion tube in the end. The result is an engine that pulls really well, from far lower down the rev range. I can do 30mph in fourth, comfortably! There is an odd vibration that he wasn't able to get to the bottom of. He was initially worried it was bottom end, but he has given me another crossbox to try, in case something odd is going on there. That sounds preferable to a knackered bottom end, which was his first suspicion. Still lots to do with the 2CV. It's due a service, needs a repaired wiper linkage fitting, needs the headlamp switch replacing and then the bodywork needs some attention for rot is trying to creep in. Oh and Pete reckons I should start building up a replacement engine with a few more goodies. Power, Less is More. Maybe... keep her 652 but rebuild it Link to comment Share on other sites More sharing options...
LightBulbFun Posted September 17, 2020 Share Posted September 17, 2020 1 hour ago, dollywobbler said: Cool. Thought it might be up your street. So wish I'd thought to take pictures of them when I was younger. wish I had a picture of the one that was literally up my street!, admittedly I was about 3 at the time! "mum why does that car only have 3 wheels?" "because its a car built for disabled people" (as such for the longest of time I thought ALL 3 wheelers where disability cars! and had it in my head that somehow by having only 3 wheels it somehow allowed for easier wheel chair access, but that was just the Model 70's wide sliding doors!) 1 hour ago, dollywobbler said: Oh and Pete reckons I should start building up a replacement engine with a few more goodies. Power, Less is More. Maybe... has anyone ever fitted a Steyr puch flat twin to a 2CV I wonder? Link to comment Share on other sites More sharing options...
dollywobbler Posted September 17, 2020 Author Share Posted September 17, 2020 I must admit I'd been contemplating whether a 2CV engine could power an Invacar... BlankFrank and BertiePuntoCabrio 2 Link to comment Share on other sites More sharing options...
LightBulbFun Posted September 17, 2020 Share Posted September 17, 2020 Just now, dollywobbler said: I must admit I'd been contemplating whether a 2CV engine could power an Invacar... are your spare 2CV engines really any better then whats in TWC already tho? LOL (and does a 2CV engine produce peak torque at 3500RPM? as thats what the CVT system is tuned to keep the rev's at as the peak torque of the Model 70's 493cc Steyr puch is produced at 3500RPM, all 22 foot pounds of it...) besides I got in contact with a Stey puch engine guy in austria (as he had a Model 70) and the first thing he did was try and sell me a super charger kit, then mention the twin turbo kit he is building/working on, I can always put you in contact with him if you need to give TWC an ol kick up the arse! LOL or just watch his video on how to enlarge a Steyr puch engine to 762cc LOL Dick Longbridge 1 Link to comment Share on other sites More sharing options...
dollywobbler Posted September 20, 2020 Author Share Posted September 20, 2020 In other aircooled boxer news, I went to Devon this weekend. The GSA was mightily impressive, sitting at an indicated 120kmh very happily. Though it did drink a slightly alarming amount of oil over the 550 odd miles - it actually went below the minimum because some idiot didn't think to check it until he was within 50 miles of home... It's doing 3700rpm at such speeds, but is turbine smooth. Enough fresh air through the vents that you don't need to open windows. Nice. 2cvspecial, GrumpiusMaximus, LightBulbFun and 3 others 6 Link to comment Share on other sites More sharing options...
Out Run Posted September 20, 2020 Share Posted September 20, 2020 I saw a black GSA on the A361, Saturday gone heading towards Barnstaple direction. I wondered, and now I know it was you. Link to comment Share on other sites More sharing options...
dollywobbler Posted September 21, 2020 Author Share Posted September 21, 2020 15 hours ago, Out Run said: I saw a black GSA on the A361, Saturday gone heading towards Barnstaple direction. I wondered, and now I know it was you. Yup. That'd be me. In other news, if you're wondering how well my 2CV sounds now, it's this well. Coprolalia, privatewire, DanGleables and 4 others 7 Link to comment Share on other sites More sharing options...
dollywobbler Posted September 25, 2020 Author Share Posted September 25, 2020 I drove to Edinburgh and swapped the Vectra for something else. After 360 miles in the Vectra, my back was in tatters. The Rover is a lot more comfortable, though not perfect. I find the seat base just isn't at the right angle. It is a diesel club. It is a lot better than the Vectra in many ways though. Apart from the very short MOT. And the non working cooling fans. And the fact the key was in pieces and it had to be started with pliers. And the fact the passenger side sill has collision damage and rot. And the fact quite a lot of the front end plastics are in the boot. Oh and the clutch is horribly heavy. But the air con works, it whispers along at motorway speeds and doesn't bounce like a deranged donkey if you hit a bump. I think I like it. LightBulbFun, Shep Shepherd, BeEP and 20 others 22 1 Link to comment Share on other sites More sharing options...
loserone Posted September 25, 2020 Share Posted September 25, 2020 Sounds perfect. Link to comment Share on other sites More sharing options...
beko1987 Posted September 25, 2020 Share Posted September 25, 2020 A sideways step then? Link to comment Share on other sites More sharing options...
dozeydustman Posted September 25, 2020 Share Posted September 25, 2020 The 75 is one of the late model Rovers I really like - comfy, spacious and relatively refined. My brother had a 2.0 Connoisseur auto which was a really good steer until it kettled. I think you’ve done a good swap here. I like that particular shape Vectra you had though. I also liked the V8 version I drove a few times when I worked at Brands Hatch - bit crude but could have some fun with it Shite Ron 1 Link to comment Share on other sites More sharing options...
Cord Fourteener Posted September 25, 2020 Share Posted September 25, 2020 It's a nice colour, that Rover! As I get older, being comfortable and having a smooth ride matters more, as does having a nice dash environment. I think the Rover's aspirations to luxury achieve that to some degree. Until the next change, happy cruising. Link to comment Share on other sites More sharing options...
Zelandeth Posted September 25, 2020 Share Posted September 25, 2020 Right time of year for it to turn up given the 75 has one of the nicest dashboards to see in the dark ever in my opinion. The warm amber glow of the instruments in the dark is just lovely. LightBulbFun 1 Link to comment Share on other sites More sharing options...
Split_Pin Posted September 26, 2020 Share Posted September 26, 2020 I liked the Vectra but much prefer the 75. I like my Vauxhalls but the long distance seat comfort was never great, and I don't suffer from back pain often. The clutch can vary on them all, both my manual diesels clutch pedals were heavy and the gear change was a bit agricultural, rather like driving a truck. It's probably just a bit tired, hopefully you'll get used to it! The seat should have a good adjustment range being a Club, lumbar support should be there. I can't remember if my base model Classic had it but it was still comfy. Seems from your video that you have one with complete rear springs too as you say it rides well. A choppy rear ride will result if the ends have broken off, hidden from the MOT man. Enjoy! Link to comment Share on other sites More sharing options...
Carlo_Raffo_TDS Posted September 26, 2020 Share Posted September 26, 2020 Would this Rover 75 be an OG of Cowley or had they moved to Longbridge by then? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now