Lewis Mackland Posted December 14, 2019 Share Posted December 14, 2019 DIY Annual Service- just £42. Oil and filter change, air filter change and spark plug changed on the Aygo after 7,261 miles and 350 days since my last DIY service.Currently on 48,626 miles.The air filter hadn't been changed since September 2012 and that was 31.5k miles ago! Wow it was really disgusting.The mighty 1 litre Toyota is running like brand new ready for another year of motoring! Never going near a dealer again! So much cheaper, you get to learn about your car and you know exactly what has been done. drewd, jcr, BlankFrank and 23 others 26 Link to comment Share on other sites More sharing options...
SiC Posted December 14, 2019 Share Posted December 14, 2019 I found it very satisfying doing an oil change for the first time. Remember though that a service is a bit more than a oil+filter change and a couple of other consumables. A service includes an inspection of the car for worn out and failed parts. So brake pad thickness, suspension bushes, steering rack play, shock+spring condition, checking for any (excessive) leaks, etc. I also found it a lot easier and more reassuring to do car work under ramps. I tend to jack the car up first now and put the wheels on the ramps, as my jack can go high enough to do that. But before, I just used to drive straight up them and have someone shout stop as I get to the top. Lewis Mackland 1 Link to comment Share on other sites More sharing options...
Lewis Mackland Posted December 14, 2019 Author Share Posted December 14, 2019 16 minutes ago, SiC said: I found it very satisfying doing an oil change for the first time. Remember though that a service is a bit more than a oil+filter change and a couple of other consumables. A service includes an inspection of the car for worn out and failed parts. So brake pad thickness, suspension bushes, steering rack play, shock+spring condition, checking for any (excessive) leaks, etc. I also found it a lot easier and more reassuring to do car work under ramps. I tend to jack the car up first now and put the wheels on the ramps, as my jack can go high enough to do that. But before, I just used to drive straight up them and have someone shout stop as I get to the top. I borrowed a friend's ramps last year, but he's sold them since- also had to rev the tits and burn the clutch to get the 67bhp Toyota up them ? Whilst I was under, I did do a good check of the tyres, brakes, rust, suspensiony bits . Ah I get what you mean- lift the front of the car up- then place ramps underneath Link to comment Share on other sites More sharing options...
New POD Posted December 14, 2019 Share Posted December 14, 2019 I have some old pieces of decking that I use to reduce the slope on my ramp. Otherwise the weight of the boat engine in the omega causes the ramps to slide away. The tyres are so wide that they stick out both sides when I get to the top. I have 2 spare sets. I have jacked up the back end previously and sat the mx5 on 4 ramps to do the exhaust. FakeConcern 1 Link to comment Share on other sites More sharing options...
Isaac Hunt Posted December 14, 2019 Share Posted December 14, 2019 DIY, Agree, you also get to know exactly what components have, and have not been replaced. i cHange Oil & Filter at max 10k miles on all the family fleet. I use oil by grade and spec and steer clear of the 'overpriced by brand' stuff. Most of the time I am getting through at least two oil and filetr changes within the manufacturers recommended, sometimes even three. when I used to run a fleet car, I always insisted on the old component so being placed Ina carrier bag in the boot. Except the oil and filter. Even then they can shove any old parts in the boot, but I figured it signalled to them 'I am watching you'. I've been in the trade or around the trade for a long time, I know what goes on sometimes. theshadow 1 Link to comment Share on other sites More sharing options...
gm Posted December 14, 2019 Share Posted December 14, 2019 It’s always satisfying to give a new car a quick service, did you end up with a spare spark plug? When I ordered a set of three for mother gms 107, europarts sent a set of four. They did the same last year too, next year I shall only need to order a single plug Link to comment Share on other sites More sharing options...
chodweaver Posted December 14, 2019 Share Posted December 14, 2019 And, in case you ain't in the habit already, get full value out of your diy work by FULLY DOCUMENTING it. I know a spreadsheet could be cooked up just before the sale of a diy maintained motor, but most dodgy people won't go to the trouble. A nice line by line record with date, mileage, description of work done and parts used (and even brand, part no, price and supplier) can be very helpful, not only to the next owner but to you as well - saves hunting around again for part numbers in a year's time, or trying to remember where you got that difficult-to-source part. Finally, my spreadsheets have two tabs - one for work done, one for work I've noted that needs doing... helps track the wear rates of parts and - for those practicing bangernomics or who are more diligent than me when it comes to it - the total cost of ownership.Sent from my BV6000 using Tapatalk beko1987 and The Moog 2 Link to comment Share on other sites More sharing options...
beko1987 Posted December 14, 2019 Share Posted December 14, 2019 I've still got the jack and stands my mum got me when I got my first car! Still working fine, added a pair of cheap ramps since then. I too need to saw up wood to get the zx on them! Link to comment Share on other sites More sharing options...
MikeR Posted December 14, 2019 Share Posted December 14, 2019 Spark plugs and wheel bolts . always nice to not have some ape swing on them so you can undo them next time ! Link to comment Share on other sites More sharing options...
Sir Chocolate Teapot Posted December 14, 2019 Share Posted December 14, 2019 Bravo, only bit of extra advice i will give is try and do diy roadside servicing at a warmer time of year. I always plan / aim for late spring early summer. Not too hot and not too cold.? MikeR and chodweaver 2 Link to comment Share on other sites More sharing options...
SiC Posted December 14, 2019 Share Posted December 14, 2019 I find being under a hot car during warm weather to be far more unpleasant than under a cold car in cold weather! wuvvum 1 Link to comment Share on other sites More sharing options...
Broadsword Posted December 14, 2019 Share Posted December 14, 2019 It's always satisfying doing little jobs like this yourself and then you know it has been done right. I'm happy to sub out more challenging jobs to garages, but simple things like basic servicing are going to get rushed. Doing it yourself over a cup of tea, draining oil properly, picking out best filters and good oil, keeping a log in the service history, checking underneath the car, suspension joints etc, it's a good thing to do. chodweaver 1 Link to comment Share on other sites More sharing options...
Lewis Mackland Posted December 14, 2019 Author Share Posted December 14, 2019 The previous 2 owners have been good enough to keep all the invoices for everything in a folder, I've filled the online order invoice and hand signed and dated it - I know it's not a stamp in the book but I don't plan on selling the car. Also made a spreadsheet and smartphone reminders for everything for my own keeping Link to comment Share on other sites More sharing options...
chodweaver Posted December 14, 2019 Share Posted December 14, 2019 Good point - calendar reminders for checks and oil changes. More's the pity that even the newest vehickles don't report their mileage by email/twitter/Bluetooth/the ether so it could trigger checks and servicing. I know 80s Hondas had little odometer driven indicators for tyres and oil. What a pity there wasn't one for Waxoyling...Sent from my BV6000 using Tapatalk egg 1 Link to comment Share on other sites More sharing options...
davehedgehog31 Posted December 24, 2019 Share Posted December 24, 2019 These are tremendous cars. Top work on the servicing, satisfying doing little jobs like that yourself. Save money and have peace of mind it was done correctly. I've had two C1s and will absolutely have another. Really fun and capable little things. The engine is a peach and tremendous on fuel. If you ever find yourself down the central belt you'll be welcome at our little meeting, last Wednesday of the month; loserone, chodweaver and Lewis Mackland 3 Link to comment Share on other sites More sharing options...
overrun Posted December 24, 2019 Share Posted December 24, 2019 This reminds me, I need to clean the filter in the tumble dryer. JK M8! Good to see the younger generation getting stuck in. ? Link to comment Share on other sites More sharing options...
Rod/b Posted December 24, 2019 Share Posted December 24, 2019 On 12/14/2019 at 1:02 PM, chodweaver said: And, in case you ain't in the habit already, get full value out of your diy work by FULLY DOCUMENTING it. I know a spreadsheet could be cooked up just before the sale of a diy maintained motor, but most dodgy people won't go to the trouble. A nice line by line record with date, mileage, description of work done and parts used (and even brand, part no, price and supplier) can be very helpful, not only to the next owner but to you as well - saves hunting around again for part numbers in a year's time, or trying to remember where you got that difficult-to-source part. Finally, my spreadsheets have two tabs - one for work done, one for work I've noted that needs doing... helps track the wear rates of parts and - for those practicing bangernomics or who are more diligent than me when it comes to it - the total cost of ownership. Sent from my BV6000 using Tapatalk Anyone who turns up wanting FSH on a 13+ year old Aygo should be told to FRO. Wingz123 and theshadow 1 1 Link to comment Share on other sites More sharing options...
chodweaver Posted December 24, 2019 Share Posted December 24, 2019 Anyone who turns up wanting FSH on a 13+ year old Aygo should be told to FRO. That's an opportunity to print out your painstakingly* prepared print out of all the work done on it...Sent from my BV6000 using Tapatalk Link to comment Share on other sites More sharing options...
beko1987 Posted December 24, 2019 Share Posted December 24, 2019 I find a nice detailed project thread on here does it! Granted I've scrapped my last few cars, but we're the zx to be sold I'd just have to give a link to my thread and there it is! Dates and mileages and pictures LightBulbFun 1 Link to comment Share on other sites More sharing options...
reb Posted December 24, 2019 Share Posted December 24, 2019 It's good to see a car that a lot of people wouldn't bother with being well cared for! Without people like you I think they'd start disappearing forever soon enough. Bonus points for doing it in the freezing cold, I did my dipped headlight bulbs yesterday and that's quite enough for me right now. Top shiting! LightBulbFun and Lewis Mackland 2 Link to comment Share on other sites More sharing options...
Dan302 Posted December 24, 2019 Share Posted December 24, 2019 I need to empty all the containers of old engine oil out of my shed before I can do my next oil change......or just buy another container Link to comment Share on other sites More sharing options...
PiperCub Posted December 24, 2019 Share Posted December 24, 2019 OP: Well done, good for you, can't understand why more people seem unwilling, unable or plain scared to do the same. The thing is, folk bleat on all the time about how "complex modern cars are", how "you can't fix or service them anymore, you need £<much money> in kit to even check the oil". Granted, electronic diagnosis, serious problem solving may require a professional but in respect of regular servicing, this is for the most part, bollocks, the modern car has far fewer servicing items that require regular attention (at longer mileages too) and those that do are often quite straightforward to do. Seriously, think about how many things you don't need to do anymore when servicing, setting valves (rare now on cars), changing/setting CB points, adjusting timing (rarely needed, often not possible), adjusting carb settings etc., The standard stuff, oil changes, plugs, air filters etc are usually pretty simple yet routinely, folk still happily pay out £100+ for someone to change the oil and kick the tyres! DIY is quite easy and saves you a packet, plus you know what you've done and can have a sense of satisfaction in doing it for yourself. Oh well, it's not my money and garages have to eat too I guess. chodweaver and egg 2 Link to comment Share on other sites More sharing options...
Parky Posted December 24, 2019 Share Posted December 24, 2019 Well done Lewis, good work my friend! Reminds me I need to do the 6000 mile oil & filter on the Leon. Should really do a brake fluid change and get some pads on it too. Luckily a lot of places will have a post Christmas sale so I reckon I’ll get stuff cheaper in a couple of days time. Wife’s Mini needs a few bits (parcel shelf, fag lighter, mats, stonechips touched up) so again will wait a couple of days and put in an order for stuff. Lewis Mackland 1 Link to comment Share on other sites More sharing options...
beko1987 Posted December 24, 2019 Share Posted December 24, 2019 12 minutes ago, PiperCub said: OP: Well done, good for you, can't understand why more people seem unwilling, unable or plain scared to do the same. The thing is, folk bleat on all the time about how "complex modern cars are", how "you can't fix or service them anymore, you need £<much money> in kit to even check the oil". Granted, electronic diagnosis, serious problem solving may require a professional but in respect of regular servicing, this is for the most part, bollocks, the modern car has far fewer servicing items that require regular attention (at longer mileages too) and those that do are often quite straightforward to do. Seriously, think about how many things you don't need to do anymore when servicing, setting valves (rare now on cars), changing/setting CB points, adjusting timing (rarely needed, often not possible), adjusting carb settings etc., The standard stuff, oil changes, plugs, air filters etc are usually pretty simple yet routinely, folk still happily pay out £100+ for someone to change the oil and kick the tyres! DIY is quite easy and saves you a packet, plus you know what you've done and can have a sense of satisfaction in doing it for yourself. Oh well, it's not my money and garages have to eat too I guess. Undeetrays can fro though! If I'd have done more than one oil change in ownership on my lagunas I'd have gone the pela route. They had to be refitted too, car feels scary at 75 without them. And on the blue one it kept the oil off the road... chodweaver 1 Link to comment Share on other sites More sharing options...
reb Posted December 24, 2019 Share Posted December 24, 2019 11 minutes ago, beko1987 said: Undeetrays can fro though! If I'd have done more than one oil change in ownership on my lagunas I'd have gone the pela route. They had to be refitted too, car feels scary at 75 without them. And on the blue one it kept the oil off the road... The one on the Volvo is currently held on with about 2/3 as many fastners as it should be and makes a satisfying SMACK over speed bumps. The sound deadening in it also acts to absorb any of the excess oil the engine seems to generate despite the oil level staying constant for far longer than seems logical. Link to comment Share on other sites More sharing options...
SiC Posted December 24, 2019 Share Posted December 24, 2019 43 minutes ago, beko1987 said: They had to be refitted too, car feels scary at 75 without them. And on the blue one it kept the oil off the road... And water out of the electrics. Important thing on a Laguna II. beko1987 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now