Jump to content

Rusty VW bothering - tapping driving me nuts!


rusty_vw_man
 Share

Recommended Posts

Been a serial lurker and occasional poster of nonsense, but have never quite got round to posting some pictures and the ongoing tribulations of being a serial VW licker.

First a disclaimer - I like old VWs, partly as I grew up with them and partly because I understand how the work and I can fix* them. I do not like the 'scene' attached to them, it seems to attract too many of a certain type of person I am often allergic to - they bring me out in a shouty rage. 

First car was a'69 beetle in red, driven flat out everywhere  until the rust took it. This was followed by a succession of Mk2 golf , vauxhall omega (vauxhall being close to VW in the sales ads)  a free Mk3 golf which was dire and tried to kill me multiple times. I have no photos of any of these as they were pre-camera phone and mostly awful. 

Then came a T25 camper bought using generous donations from friends and family at our wedding . Bought, and a week later after hovering 15 years of dog hair out of it, we drove it all the way to northern Norway on honeymoon. Used it for a while.

Bought a vauxhall astra estate (again, it was almost a VW in the sales section). It sucked. It did a year of commuting then it was scrapped. Was gifted a skoda fabia estate by my dad as a sensible run around. 

During this time my wife wanted a sensible runaround for her and the kids, so we bought a bright orange 1971 beetle (rusty of course) which was excellent fun. People were openly critical of apparent lack of regard for our offsprings safety. I pointed out it had seat belts.

 Due to rusting the T25 was sold as a project, the Skoda was sold for being too dull and a T2 purchased.

Here is the peak of VW ownership, where the beetle, bay and T25 are all in one place just before sale:

smoll1.thumb.JPG.ec25e80fecf61d20bcb881b2c87c5637.JPG

So now we had two aircooled vehicles, the newest of which was  made in 1973.

This lasted for exactly 9 months., during which I did lots of this:

IMG_0556.thumb.JPG.1922350db528a81e87a9c4982be2a1e2.JPG

to be repeatedly rewarded with this:

IMG_0745.thumb.JPG.56b571f4a70bbf8ba5dfef7bd4b7a706.JPG 

When the breakdown driver asks how the kids are getting on, you know you've seen him too much....

I also conducted some invisible repairs on the rusty bits of the beetle. I'll point them out if anyone can't see them:

IMG_0708.thumb.JPG.b98be1024faeb9c84a67a92d2afb00d0.JPG

A promotion and car allowance then allowed me to purchase a C3 Picasso (best not ask, I hate it). Its purple. I feel like a dick when I drive it. 

Beetle then had to go due to third child and not enough seats, but it had the good engine, the van did not. A swap occurred. My neighbors love* me and find my antics endearing*. I clearly have no need for a drive or garage.

IMG_0787.thumb.JPG.3b837a866b6d7010df21e1f2e089b155.JPG

After 1 too many FTPs, I was told van or family. I chose family and the van left. 

I then went a looked at another T25 minibus (three kids now) and was in much trouble for even considering another van. 

Two weeks later, after some small* arguments* we were in total agreement* and the van was purchased. 

Roughly 18 months ago - note lovely laqueer peel, mismatched rear wing and low level tide mark:

IMG_1305.thumb.JPG.c44b5236e808587ebee22551ecddc5bd.JPG

 

IMG_1307.thumb.JPG.6101d0998e7ea315f8ca8f1f85daa0f6.JPG

After some light fiddling I have made a very basic day van affair, and we dragged it with camping gear and the three kids all the way up to the arctic circle in Finland last summer (wife has family in that part of the world).

6 days before departure I noticed the rear suspension had a bit of paint hanging off. I pulled and it showed this below:

IMG_0048.thumb.JPG.27855477675d2b7431c8f1a0009d40b2.JPG

 

Trip to machine mart, a google of "mig wleding for numpties" and a youtube video later and I'd made this:

IMG_0049.thumb.JPG.f77e6fb11e14a807661bf2791861df40.JPG

and away we went. 

Here it is in a moody B&W photo  in the land of the midnight sun, which really brings out the high quality paint. the rear suspension is still attached though, so winning. 

 IMG_0134.thumb.jpeg.4f967eb3a6375b83b0d2f15c1d0da22a.jpeg

That's an epic catch up post really, but will use this space now to document the exciting* repairs and work done on it to keep everything attached .and working.... 

Link to comment
Share on other sites

Was a little worried the van would behave and this thread would just fizzle away. 

Just popped outside though, saw the tailpipe looked a bit squiffy, so touched it and:

5F8963C2-4EBF-439B-8405-32B963C9AB29.thumb.jpeg.136c177882071bff41f8db915aa4d13f.jpeg

oh FFS. A closer looks shows the whole system is leaking gently and only wafer thin. Double FFS.

Biggest problem will be finding the cash for a new one (Scene tax) and then getting this one off without snapping at least one stud on the head.

According to some experts* on the internet without this bit I’m going to fill the van with carbon monoxide when stationary. 
Might be a problem with the kids in the back, so I’ve got them practising holding their breath.....

Link to comment
Share on other sites

Thanks all for the comments, good to see there is other T25 lickers about. 

On 12/7/2019 at 4:01 PM, bunglebus said:

Make a tailpipe - easy enough to cut a bit of thick steel for the flange and a bit of cheap curved pipe to finish

I did initially think I'd just weld the bit that came off back on, but the condition of the rest of the system makes this somewhat futile - its blowing at every joint judging by the carbon streaks   and there is very little metal left holding the rust together. the back box is about the only bit that is reasonable, but the flange on the other end is shot too.  It is 24 months old and cost the PO  just shy of £500 unfitted. 

On 12/7/2019 at 1:22 PM, DaveDorson said:

I might have an exhaust for that down the unit 

If you do and fancy flogging it let me know!

Link to comment
Share on other sites

7 minutes ago, rusty_vw_man said:

If you do and fancy flogging it let me know!

I checked over the weekend, it's marked up as being a 2.1 petrol silencer but it's a cheap ebay one from Germany.

I've a feeling I bought it as a suitable silencer for the GTI engine that's going in my one using diesel parts, and if it is, then I'm likely to keep hold of it.

it's also missing the tailpipe bit that you need, it's just the silencer.

I seem to remember you can buy them for less than the usual suspects charge, but I can't comment on the fit, as mines never been mounted.

 

 

Link to comment
Share on other sites

9 minutes ago, DaveDorson said:

I checked over the weekend, it's marked up as being a 2.1 petrol silencer but it's a cheap ebay one from Germany.

I've a feeling I bought it as a suitable silencer for the GTI engine that's going in my one using diesel parts, and if it is, then I'm likely to keep hold of it.

it's also missing the tailpipe bit that you need, it's just the silencer.

I seem to remember you can buy them for less than the usual suspects charge, but I can't comment on the fit, as mines never been mounted.

 

 

Cheers. I would be interested to see the petrol GTI mounted using the diesel mounts and bell housing. My first T25 needed a new engine, I did look into this, but ended up rebuilding the WBX instead for various reasons.  Seems like a good way to get a bit more power. 

Some googling has shown that I can get a full stainless system locally for less than the mild steel ones  the main suppliers flog, so think I will go down that route. 

Link to comment
Share on other sites

1 minute ago, rusty_vw_man said:

Cheers. I would be interested to see the petrol GTI mounted using the diesel mounts and bell housing. My first T25 needed a new engine, I did look into this, but ended up rebuilding the WBX instead for various reasons.  Seems like a good way to get a bit more power. 

Some googling has shown that I can get a full stainless system locally for less than the mild steel ones  the main suppliers flog, so think I will go down that route. 

It's a long way off at the moment.

 

Life, welding bits back on, and multiple workshop woes mean I've not really touched it in about 18 months.

Link to comment
Share on other sites

Looking for a photo I have uncovered an old seam of tat photos that I thought I had lost. 

I painted the first T25 by hand - first some prep. You can just see the remains of a stubborn cack brown 1980s stripe that came back through three coats. 

IMG_0917.thumb.JPG.bf16e27ee60c51694a074cce3e880f54.JPG

and then some roller action:

IMG_0926.thumb.JPG.37915eedfcc940fc7c024f97536bed9b.JPG

and it looked good at this distance:

IMG_1394.thumb.JPG.f3d84ae4db3472572e76c8ec82e72b35.JPG

After some serious cutting and multiple coats it looked pretty good closer too - in its natural habitat:

IMG_1211.thumb.JPG.be8c87b6ccf3dd23ff0f1e3dbb562a7a.JPG

No plans to do it again any time soon though, was more labour intensive than spraying, and after a few years it had faded. 

Link to comment
Share on other sites

  • 2 months later...

Come home to see a suspicious patch on the road under the van:1369CE5C-1F54-495B-9445-B211B6AB6F6F.thumb.jpeg.23a0594f4e3ffdfdb62fe55023bde8b6.jpeg
 

A quick poke showed it was coolant not oil. Next puzzle was what had decided to randomly start leaking when I hadn’t even driven it for a week. 
 

Overalls over smart work clothes and a phone torch bought me to this piece of Germanic madness - the clipped in place temperature sensor which is just push fit with an o ring. C71B6F2A-7F35-4C99-9FD8-48F497F52887.thumb.jpeg.4cea1e28642807006f3d25f2778874e8.jpeg

red one fine, black one pissing water and wobbly, verdict o ring given up. Every single vehicle I have had with these has leaked at some point, what’s wrong with just screwing them in?! 

So hopefully a cheap fix, but location dictates that I need arms like an orangutan and will have to have my head in the stream of escaping coolant whilst I do it. Can’t wait. Plus it needs to be running for Monday as I need it for a 200 mile round trip for work, and the weekend is already stacked out. It’s almost like it knows.....

Link to comment
Share on other sites

So that went as well as could be expected. 

It is only possible to get to from underneath. Coolant capacity is huge and I lack enough buckets to act as a temporary store, so didn’t want to fully drain it. So I crawled under, popped the clip and pulled out the sensor. It got far enough out to allow the coolant to run down my arm and into my overalls, but held firm enough to need a decent wiggle, all the while my overalls was filling up. Finally got it out and crawled back out and literally poured coolant out my sleeve. Nice. 

Cracked into my new 225 piece o ring set as Sunday, so limited options for o ring buying. Only it turns out that 20mm by 4mm isn’t close enough to VWs 19.6mm by 3.65mm to fit. I figured being rubber, and squashy it would be fine, but despite trying various things including a bit of lube it would not fit. So old one back in with a smear of sealant on it. Laid in puddle of coolant to pop it back. Unsurprisingly it still leaked. Also broke silly springy metal clip putting it back. 

Retreated cold, wet and smelling unappealing of coolant to the house.  Used it anyway, just topped up regularly. Parts now on order. 

Only thing is I have to do it again, and can’t decide whether to drain it, or just warm it up a bit first so at least it’s not cold as it fills up my overalls..... 

Link to comment
Share on other sites

  • 1 month later...

So back in December the tail pipe fell off. Now two joints are leaking, and there is a small hole in one of the headers. As lock down means I'm not spending money (and the MOT is approaching) I thought I'd treat myself to a new one. Strangely a stainless sports* one was cheaper than a cheap mild steel one, so I clicked and 26 hours later this arrived:

IMG_0849.thumb.JPG.b0db59c09c453f401d1901c0455c6a0a.JPG

Unfortunately its beaten the new gaskets, head studs and nuts here, so all I can do is look at it making racing car noises.....

Next game is to get the old one off. I have no drive or garage so will have to find a secluded corner of the street and socially distance myself underneath the van. 

Last time I tried removing an exhaust on a flat four engine I ended up doing this, which the eagle eyed amongst you will note you is a head some way away from both van and the rest of the engine, allowing me an opportunity to snap off various easzi-outs and drill bits before managing to tap a hole slightly on the piss.  A 95% successful repair. 

 211979687_19052011560(2).thumb.jpg.18f0345fb1fcab7136eb334e8b2d498f.jpg

According to the owner forum I need to soak my nuts in plus-gas for a week before hand, but so far its just made them sting, so not sure I'm doing it right.....

Link to comment
Share on other sites

I'd totally forgotten that they did these with water cooled boxers...for some reason my brain had decided that they switched to the inline engines when water cooling came in.

That should sound the business with the new exhaust on.  Even with the stock system on I remember my T25 (1.6 CT engine in that one, she was a really early one on a V suffix plate) had a lovely exhaust note.

Link to comment
Share on other sites

23 hours ago, bunglebus said:

I remember fighting to fit a pattern heat exchanger on my 2.0 one, not fun. At least you don't have that pleasure to look forward to!

Looks a nicely made bit of kit anyway ^^^

One with the oval exhaust ports and the copper gaskets? All my aircooled exhausts needed a fair amount of encouragement with a hammer to fit. I remember being nearly in tears with a cheap Earnst pattern exhaust with razor sharp edges where only 5 out of the 6 attachment points would line up with the engine and carb heat risers at any one time. 

 

1 hour ago, Zelandeth said:

I'd totally forgotten that they did these with water cooled boxers...for some reason my brain had decided that they switched to the inline engines when water cooling came in.

That should sound the business with the new exhaust on.  Even with the stock system on I remember my T25 (1.6 CT engine in that one, she was a really early one on a V suffix plate) had a lovely exhaust note.

Yes - one of their less clever ideas really, the water jacket around the engine is very much an after thought! To get one of the gudgeon pins out you have to go in through the hole for the water pump, plus theres the 58km of pipework between front and rear of van.  They did go for inline diesels, not sure why they didn't just whang a petrol golf engine in as an option. They did a 5 pot audi engined one for South Africa which is very nice. 

 

1 hour ago, cobblers said:

I went to buy a van off a guy a few years ago who had a nice exhaust on his 2.1WBX California, and it did sound absolutely beautiful. I really really miss my T25.

I'm a little alarmed at the size of the pipes and the very lightweight nature of the backbox - doesn't feel like there is much in there to stop the loud coming out, so not sure if the sound will be nice or rather loud. Just fingers crossed it doesn't drone at cruising speed, otherwise I'll be in trouble with the kids in the back! 

Enjoyed your write up of T25 ownership, also enjoying the ongoing Talbot, which to be fair looks a whole lot more practical than the T25! 

Link to comment
Share on other sites

1 hour ago, rusty_vw_man said:

Just fingers crossed it doesn't drone at cruising speed, otherwise I'll be in trouble with the kids in the back!

I so totally dodged a bullet with that on my current van.  The silencer is basically an empty box as best I can tell with zero baffles.  It's...throaty.  However pretty much the only point in the rev band it's quiet is precisely at 60mph in top.

...On the motorway at 70 (honest...) It's not...though in full juggernaut mode at that point it's just one more layer in about 50 major contributors to the racket!

Also here's a photo of my old van.  She was an utter rot box (definitely repairable, aside from the outrigger under the offside tail light the underside was virtually immaculate), but it took me less than 30 minutes to get it running and driving after being abandoned under a tree for ten plus years.  Even the brakes worked fine!

The bodywork would (and one day might, she's apparently still patiently waiting in dry secure storage for restoration) take a huge amount of time to sort though as basically every panel was shot.  If I'd been sensible I'd have broken it for parts as soon as it arrived on my drive...however being such an early one I really wanted to do what I could to save it.  Basically everything from the sills (inclusive!) upwards though was rotten.

Aside from being so underpowered that she couldn't get out of her own way she drove really nicely actually...only real sign of disuse was an obvious divot in the brake discs once she'd cleared her throat after a mile or so.  Hopefully one day she might be restored, who knows!

SDC12174.thumb.JPG.81b2dfaec3dce178063357e02bbfd226.JPG

SDC12175.thumb.JPG.44aa517b31cda6e58c05549446b271b0.JPG

SDC12221.thumb.JPG.835f49a3aa0d7ea37f33c990e58139e5.JPG

Photo016.thumb.jpg.25da05ff68757dbbb80236ac4ac551f0.jpg

SDC12163.thumb.JPG.0b69c30189fbce19aa53af590b3c523b.JPG

SDC12180.thumb.JPG.c74fd6f36cd9d700a5f09fdfcd633815.JPG

SDC12398.thumb.JPG.a4ee854ad957e9aa63545a7b1a1db9cc.JPG

Was a good fun diversion at the time though and I reckon I passed it on to the next owner with far more chance of survival than it arrived with me.  If I hadn't wound up with a certain other German van from the same era...

IMG_20200417_171335.thumb.jpg.32503eb15be887c510dc70d586ec8d02.jpg

...I could definitely have seen me having another - though now I remember the cost of some of the parts I do somewhat question that logic! 

Would love a proper shot of one though.  Obviously mine never really saw the road in my ownership - only brief trip out was to a local welder to assess whether a couple of bits were actually repairable.  Their assessment was "Absolutely if you've got a few years."

Main thing I recall was that it rode astonishingly well for a van.

Link to comment
Share on other sites

16 hours ago, Zelandeth said:

Would love a proper shot of one though...

Main thing I recall was that it rode astonishingly well for a van.

Here's a proper shot of mine

 

34903680783_3e96cb02bf.jpgBungleinthesnow by RS, on Flickr

 

VW had independent suspension all around from day one on the Transporter, whenever I drove a Transit or Sherpa it was more like being in a cart without the horse. T3s drove like a big car.

Haven't quite worked out when VW went from the pressed metal rear air vents to the plastic insert, as I've seen earlier vans than mine with the plastic bit. 1985 was a big change, loads of the electrics, sliding door, think even the cab floor is different after that, but these really early ones have a different tailgate (around the lock), small badge grille that's almost always broken, different flap behind the number plate to check/top up oil etc

Link to comment
Share on other sites

The vents changed quite early on, sliding door on about a C plate

*edit* plastic vents were 1981 when the diesel was introduced. Sliding door changed in 1985 with the shorter handle and different latches etc. A right &^%$$ to find an early panel van one!

 

Link to comment
Share on other sites

Sunny day, so thought I’d have a crack at the exhaust. 

First relocate to dead end at the end of the road to avoid Covidiots coughing on me - today’s luxury* workshop* looks like this:

41D9DE0D-48E0-4D83-824C-B0BB1F0FA597.thumb.jpeg.a258f83a87e5d701f9851874549ffdde.jpeg

First 4 head nuts came off fine, no hassle, no drama. Number 5 needed my finest high precision spanner - this is from underneath looking up, so you can image the rusty pieces cascading into my eyes, and as I turned my head, my left ear. 33FAEC89-FBD6-4D99-A025-302ABA971F56.thumb.jpeg.8c16f016dc550b621150b53225fb9976.jpeg
 

Nuts 6 and 7 both wound out the head studs, but cleanly. 

Number 8 stud, the last, sits under the thermostat housing, and had been gently watered by a seepage on the bottom of the housing. 13mm socket rounded instantly, 1/2inch 6 sided hammered on didn’t. Suddenly released, in a buttock clenching yielding fashion, but it was all okay. 

so all I needed to do now was split this joint:

7DCDAA24-5228-4027-A60C-032E3106AD59.thumb.jpeg.d3ed8b00f361665cbefea1e3199955bd.jpeg
 

Not happening! So hacksaw out. Now much of the exhaust was paper thin, but the only bit I could get at with the saw was surprisingly solid:

2177AE4C-B0C9-471A-8F8C-FA768B959DA0.thumb.jpeg.ad551af659af7593f6de2ef723d11335.jpeg

Got there in the end. It the n started raining coolant on my head, as I had managed to dislocate a pipe, which turned out to be barely bolted on, so just nipped it up and the pink shower stopped. I is a winna. 

At this point the 5 local druggies turned up on the other side of the hedge to ‘get it cooking up quick’ (apparently) so i felt I needed to significantly increase my distance, social or otherwise.  Moved down the street with open exhaust ports, Christ it was loud, but I liked it. The lady at number 8 with the net curtains did to, or at least she seemed to be waving enthusiastically  at me.

finally got to the good bit - putting shiny bits back:

34518B01-6237-466E-88DB-0495D70AD885.thumb.jpeg.c4ea079b89d5d55e493d5bd484f5ac3d.jpeg

Complete with proper locking copper flashed nuts - a first for me but allegedly they will come off again in the future, but not by themselves whenever they fancy. We’ll see. 

Final verdict on an ‘essential’ trip round the houses is it’s silent at idle, roars on power and cruises okay. Louder than I’d hoped, but better than I’d feared. It’s also very shiny, which does make the rest of the van look worse.

Will let it cool down then tighten everything up again.

57B31F51-36AE-47E7-B2EB-968C06AD7972.jpeg

3ADF208B-052C-4590-92B4-BFC60B83D087.jpeg

7EA882DA-5B25-4541-A8CF-CE13FE1C659A.jpeg

 

Link to comment
Share on other sites

  • rusty_vw_man changed the title to Rusty VW bothering - tapping driving me nuts!
  • rusty_vw_man changed the title to Rusty VW bothering - whoo hoo - road legal again

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Similar Content

    • By Peter C
      I bought a lovely Mini Cooper S from @Sunny Jim which my wife and I collected yesterday. See here:
      The Cooper made the 250 mile 4.5 hour journey to Buckinghamshire (from North Wales!) under its own steam but all was not well under the bonnet. The fresh air vents were providing anything but fresh air, I was choking on oily fumes. I stopped on route and wiped a lot of oil from the rocker cover and gently kept going, keeping the engine revs below 3k.
      Before you read any further, I have absolutely no qualms about the car or the deal I made with @Sunny Jim I bought an 18 year old car with 120k, sold as seen, of course there will be problems! 
      I investigated further this morning. There was oil all over the front of the engine and on top of the exhaust manifold shield.


      I went to remove plug lead No 2 and it came off in two pieces, the metal connector has split from the cable.

      Next I removed the sparkplugs. Plugs 1 and 4 were a little moist but plugs 2 and 3 were sinking in engine oil.


      The rocker cover gasket and plug well seals were obviously knackered, a typical R50/53 fault. 
      To get the rocket cover off...

      All this had to be removed. It's by no means a difficult job but it was time consuming. There is a bit more space under the bonnet of my W123 & W124!

      I've bought a new set of leads £18 and I'm picking up the gasket set tomorrow morning (£40). Hopefully the whole lot will go back together without any issues.
      Look at this engine, it's hard to believe that it's done 120k miles in 18 years. Everything under the rocker cover looks mint!

      In other news, to replace a blown brake light bulb I had to remove the entire light unit. How stupid. Modern* cars ehh?

      The annoying rattle from the tailgate was silenced with a 4 inch length of insulation tape, wrapped around the lock catch.

      I do like a clean exhaust pipe. Or two. Out came the Brasso and I am pleased with the shine.

      And finally, I've noticed that the small lights in the front bumper flick on randomly. According to the experts on a Facebook group, the presence of LED bulbs is upsetting the system.

    • By Tommyboy12
      What do you get after 16 hours and 800 miles of driving on a Sunday to collect two cars? Well @sharley17194 picks up a 1997 Citreon AX from the depths of the Lakes on the North West coast past Keswick. However, we actually started the day by driving to just near Cromer on the East coast to pick up this!
      An Austin Montego poverty spec estate with a 1.3L A-series engine! Yes you did read that bit right! Yes I know the DVLA lists the model as 1.6... Yes its correctly registered as 1.3L. No I dont know if its a factory 1.3L! 😂
      My favourite part of all this??? (Apart from the doom blue colour and the absolutely terrible interior!) 281,000 miles on the clock!
      Collection went really well and the below posts follows my initial assessment of what is quite frankly the best car I have ever purchased.



    • By Zelandeth
      Well I've been meaning to sign up here in forever, but kept forgetting. Thanks to someone over on another forum I frequent poking me about it recently the subject was forced back into my very brief attention span for long enough to get me to act on the instruction.

      I figure that my little varied fleet might bring you lot some amusement...

      So...we've got:

      1993 Lada Riva 1.5E Estate (now fuel injected, as I reckon the later cars should have been from the factory...).
      1989 Saab 900i Automatic.
      1987 Skoda 120LX 21st Anniversary Special Edition.
      1985 Sinclair C5.
      2009 Peugeot 107 Verve.

      Now getting the photos together has taken me far longer than I'd expected...so you're gonna get a couple of photos of each car for now, and I'll come back with some more information tomorrow when I've got a bit more time...

      Firstly...The Lada. Before anyone asks - in response to the single question I get asked about this car: No, it is not for sale. Took me 13 years and my father's inheritance to find the thing.


      Yes, it's got the usual rusty wings...Hoping that will be resolved in the next couple of months.

       






      Next, a proper old Saab. One of the very last 8 valve cars apparently, and all the better for it. I've driven two 16v autos and they were horrible - the auto box works sooooo much better with the torque curve of the 8 valve engine. Just wish it had an overdrive for motorway cruising...









      Next up a *real* Skoda...back when they put the engine where it belongs, right out the back. In the best possible colour of course...eye-searingly bright orange.







      Seat covers have been added since that photo was taken as it suffers from the usual rotting seat cloth problem that affects virtually all Estelles.

      Then we have possibly the world's scruffiest Sinclair C5...



      Realised when looking for this that I really need to get some more photos of the thing...I use it often enough after all! We have a dog who's half husky, so this is a really good way of getting him some exercise.

      Finally - again, I really need to take more photos of - we have the little Pug 107.



      Included for the sake of variety even if it's a bit mainstream! First (and probably to be the only) new car I've bought, and has been a cracking little motor and has asked for very little in return for putting up with nearly three years of Oxford-Milton Keynes commuter traffic, before finally escaping that fate when my housemate moved to a new job. Now it doesn't do many miles and is my default car for "when I've managed to break everything else."

      I'll fill in some more details tomorrow - I warn you though that I do tend to ramble...
    • By SiC
      Big thanks to Panhard65 for transporting this for me.


       
      Now unloaded and waiting for me to start work on it. First time I've seen it outside. I think Panhard65 thinks it's a bit of a turd but doesn't want to be nasty.

       
      Entertaining Mrs SiC friends today, so I need to put these away from kids hurting themselves. Going to live in the garden for a month undercover. If I can get the 1275 in there running, these will be sold on. If I can't, I'll see if I can get any of these in.

       
      For now, I have to earn some more goodwill credits with Mrs SiC.
    • By 320touring
      Been far too long* since I have done one of these..
       
      Last night, I spent some time ( and not an inconsiderable number of £) ordering up parts to fix 4 of the fleet. Additionally, the Audi goes in on Monday for two front tyres.
       
      By midnight I was cash poor and not yet part rich, so I downed the laptop and turned to idly browsing my phone..
       
      Staying strong through the sea of " for sale" tags here, I upped the ante and broke out TEH DADDY!
       
      Gumtree.
       
      Up in these parts, the bargains are oft far flung - population density and geography conspiring against the local bargain hunter.
       
      Due to this, my default search includes a radius of 150 miles - annoyingly flagging up NI cars not worth the extortionate repatriation costs.
       
      However, it also reaches into the far flung Ecosse.. catching exotic locations such as Duns and Huntly.
       
      But not so this time, for lo, the tree did bear fruit and it doth fall not far from my abode.
       
      This is the collection leg of the adventure, a TTT/ Split_Pin co-produced Caper.
       
      My lift arrives at 8.
×
×
  • Create New...