Heidel_Kakao Posted August 30, 2019 Share Posted August 30, 2019 But it's not a real Rover so it will be fine* beko1987 1 Link to comment Share on other sites More sharing options...
MiniMort Posted August 30, 2019 Share Posted August 30, 2019 51 minutes ago, Heidel_Kakao said: But it's not a real Rover so it will be fine* Because above all, it's not a Rover Link to comment Share on other sites More sharing options...
EssDeeWon Posted August 30, 2019 Share Posted August 30, 2019 I forgot these existed until earlier this year when I passed one on the M25, inside lane doing 40 tops and in light met green. Interested to hear / see more on this beast. That Picasso would have potentially made some interesting hubnut viewing though. Definitely picked the right car though. If this doesn't end up with Doctor Pandemonium one day then this place isn't what it used to be. DoctorRetro 1 Link to comment Share on other sites More sharing options...
beko1987 Posted August 30, 2019 Share Posted August 30, 2019 1 hour ago, Heidel_Kakao said: But it's not a real Rover so it will be fine* Just like the Honda engined ones that never throw a HG, isn't that right @RobT clayts450 1 Link to comment Share on other sites More sharing options...
hairnet Posted August 30, 2019 Share Posted August 30, 2019 On 8/26/2019 at 12:35 PM, NorfolkNWeigh said: Unless Tata fitted a self levelling mechanism in the lights and a headlamp wash system, then there's nothing borderline about how illegal they are. fully iilegal in lots of european countries - spain hate them - many euros fine if they see you with them - happened when bikes started being fitted with them H4 ftw Link to comment Share on other sites More sharing options...
dollywobbler Posted August 30, 2019 Author Share Posted August 30, 2019 Things are getting a bit out of hand... Three hours of 'detailing,' and genuine MG Rover floor mats! £3 from Rimmer Brothers. The seats are still minging, but she's looking alright I reckon. Rolled in glitter for sure. Ted Eggs, garethj, greengartside and 14 others 17 Link to comment Share on other sites More sharing options...
Mrs6C Posted August 30, 2019 Share Posted August 30, 2019 Erm, Jay seems to have photobombed your picture... dollywobbler 1 Link to comment Share on other sites More sharing options...
skoda_fan Posted August 30, 2019 Share Posted August 30, 2019 I still reckon you should've kept the Favorit, but then I'm a totally biased idiot. That is looking very shiny now. Top save and top work! Link to comment Share on other sites More sharing options...
MorrisItalSLX Posted August 30, 2019 Share Posted August 30, 2019 What else did you get from the Rimmer Bros sale? There looked to be some great bargains to be had. Link to comment Share on other sites More sharing options...
stuboy Posted August 31, 2019 Share Posted August 31, 2019 5 hours ago, dollywobbler said: Things are getting a bit out of hand... Three hours of 'detailing,' and genuine MG Rover floor mats! £3 from Rimmer Brothers. The seats are still minging, but she's looking alright I reckon. Rolled in glitter for sure. thought at first glance you had a roof rack #pineappled egg 1 Link to comment Share on other sites More sharing options...
dollywobbler Posted August 31, 2019 Author Share Posted August 31, 2019 I spent £60 including delivery and got: Rear trailing arm Bottom balljoints Washer pumps Nearside front door card (too posh, contains velour) Passenger wiper arm Front mats Boot mat Exhaust downpipe Two door release mechanisms Instrument cluster Fumbler, clayts450, Burnside and 5 others 8 Link to comment Share on other sites More sharing options...
MorrisItalSLX Posted August 31, 2019 Share Posted August 31, 2019 Bottom ballpointsI didn’t know Bic made suspension components clayts450, Eyersey1234, They_all_do_that_sir and 1 other 2 2 Link to comment Share on other sites More sharing options...
dollywobbler Posted August 31, 2019 Author Share Posted August 31, 2019 Oops... Link to comment Share on other sites More sharing options...
Broadsword Posted August 31, 2019 Share Posted August 31, 2019 A good set of genuine floor mats always make a decent improvement to the interior and getting them new for £3 is pretty good! Link to comment Share on other sites More sharing options...
beko1987 Posted August 31, 2019 Share Posted August 31, 2019 Bargain. I like the deep pile mats I've got (and had since the silver laguna) but id replace them with genuine for £3! I bet @Lord Sterling is making a basket up full of car mats for cars he doesn't own as we speak! Link to comment Share on other sites More sharing options...
Lord Sterling Posted August 31, 2019 Share Posted August 31, 2019 9 minutes ago, beko1987 said: Bargain. I like the deep pile mats I've got (and had since the silver laguna) but id replace them with genuine for £3! I bet @Lord Sterling is making a basket up full of car mats for cars he doesn't own as we speak! Nope, waiting for RAC to come and check the non-starting Micra. I've seen the mats that were supplied for the MG6, they were just universal jobbies with Rover packaging. Not saying they are for the CityRover but I wouldn't put it passed Rover when at the time theu were close to closing and probably cutting costs down massively. CityRover looks good albeit a bit dated by the time it came out. They seem really unloved so its great to see some love being given to this example. I'll keep a look out for wheel trims. Might have some late Rover 25 trim in my garage in Telford. Link to comment Share on other sites More sharing options...
clayts450 Posted August 31, 2019 Share Posted August 31, 2019 3 hours ago, dollywobbler said: I spent £60 including delivery and got: Rear trailing arm Bottom balljoints Washer pumps Nearside front door card (too posh, contains velour) Passenger wiper arm Front mats Boot mat Exhaust downpipe Two door release mechanisms Instrument cluster Parts were a fiver, rest was postage. Rimmers certainly know how to charge on postage. Luckily for me they're less than a tenner away on petrol, so I happily drive up there of a Saturday morning and collect bits meself. Wingz123 1 Link to comment Share on other sites More sharing options...
mk2_craig Posted August 31, 2019 Share Posted August 31, 2019 Well bought - both car and parts. Do you fancy some NOS mudflaps that I've inexplicably still got cluttering up my loft? No rears but THREE front flaps (2x nearside, 1x offside). Doesn't look like they'll fit a car with sideskirts, so yours is the ideal candidate. Part no. = XPT000075ACA. Price would be basically zero, though Jersey Post will want a few quid to get them from me to you. This may or may not be cheaper than Rimmer Bros, assuming they also have these in stock. LightBulbFun 1 Link to comment Share on other sites More sharing options...
dollywobbler Posted September 1, 2019 Author Share Posted September 1, 2019 Thanks, but it would need some bodywork repairs before they could be fitted, so that can be filed under 'will probably never happen.' Having now covered over 300 miles in the CityRover, I can confirm that every gearchange sounds unpleasant. I think it's probably just a tired clutch release bearing, but maybe this is the 'crap gearchange' reviewers always mentioned back in the day? The lever feels ok, but the noises do cause you to cringe a bit. Also, the flappy indicator stalk is a pain in the arse. It does get a merry shift on though, and feels much nicer to drive at slow speeds than a Daewoo Matiz. Link to comment Share on other sites More sharing options...
Wingz123 Posted September 1, 2019 Share Posted September 1, 2019 SURELY, changing the clutch/release bearing and having it all apart in this is never worth doing? Link to comment Share on other sites More sharing options...
dollywobbler Posted September 2, 2019 Author Share Posted September 2, 2019 On 9/1/2019 at 9:26 AM, Wingz123 said: SURELY, changing the clutch/release bearing and having it all apart in this is never worth doing? I'm certainly in no rush to attempt surgery. But, I did have a nice time taking it to Chumley for the 'nowhere near 1000 classic cars' event, and many an Autoshiter enjoyed a spin around the field in it. Apols to Catsinthewelder for forgetting about the immobiliser, but he's a man used to non-starting vehicles and had it sussed in no time. Drive home was jolly too. The gearchange graunch is annoying, and it also did seem to drink rather more petrol than I thought appropriate. I haven't done a fill-to-fill, but I did slosh 21 litres in, and it's used all that and more to cover almost 200 miles. That's comfortably below 45mpg then. But, despite the firm seats, it's actually quite comfortable and it does zip along nicely. I've now ordered up a rear wiper motor and a brochure, so that'll tip it over £300 in total, including the £60 of stuff I mostly didn't need from Rimmer Brothers. Overall, I still like it. Naturally, it doesn't feel one bit like a Rover, but at this age, I reckon it stacks up well enough against its rivals of the time. BL Bloke, catsinthewelder, RayMK and 9 others 12 Link to comment Share on other sites More sharing options...
DoctorRetro Posted September 2, 2019 Share Posted September 2, 2019 On 8/30/2019 at 3:22 PM, EssDeeWon said: I forgot these existed until earlier this year when I passed one on the M25, inside lane doing 40 tops and in light met green. Interested to hear / see more on this beast. That Picasso would have potentially made some interesting hubnut viewing though. Definitely picked the right car though. If this doesn't end up with Doctor Pandemonium one day then this place isn't what it used to be. I'm a changed man now, I've had this current car nearly a month... Oh, wait... On 8/30/2019 at 3:40 PM, beko1987 said: Just like the Honda engined ones that never throw a HG, isn't that right @RobT Sssh! EssDeeWon 1 Link to comment Share on other sites More sharing options...
dollywobbler Posted September 4, 2019 Author Share Posted September 4, 2019 More shopping has taken the cost of this car up to £301. Slightly concerned that the rear wiper seems to have been removed by simply smashing the rear window. I'm hoping it will actually come apart to enable fitting... michael t, TooManyPeopleMovers, Lacquer Peel and 6 others 9 Link to comment Share on other sites More sharing options...
Noel Tidybeard Posted September 4, 2019 Share Posted September 4, 2019 the "patina" is a little too shagnasty even for your shittyrover ? ? Link to comment Share on other sites More sharing options...
dollywobbler Posted September 4, 2019 Author Share Posted September 4, 2019 I have managed to dismantle it. Not got time to fit it though, but I need to order up a new rear blade anyway. egg and Bamboocarman 2 Link to comment Share on other sites More sharing options...
TripleRich Posted September 4, 2019 Share Posted September 4, 2019 Amazing rimmers hold stock for these including metalwork. If you need a sill it comes with a bit of excess metal... Hope they continue to hold onto the MG Rover stuff. I'll be restoring these in another 20 years, those panels will come in handy. michael t, Burnside, BlankFrank and 4 others 7 Link to comment Share on other sites More sharing options...
busmansholiday Posted September 4, 2019 Share Posted September 4, 2019 36 minutes ago, TripleRich said: Amazing rimmers hold stock for these including metalwork. If you need a sill it comes with a bit of excess metal... Hope they continue to hold onto the MG Rover stuff. I'll be restoring these in another 20 years, those panels will come in handy. Do they have enough bits for you to be able to build one for us ? Bamboocarman, BlankFrank, michael t and 2 others 4 1 Link to comment Share on other sites More sharing options...
Tadhg Tiogar Posted September 5, 2019 Share Posted September 5, 2019 11 hours ago, busmansholiday said: Do they have enough bits for you to be able to build one for us ? He can always find spares in India if he runs short here. Tata for now. michael t, gadgetgricey, Bamboocarman and 1 other 2 2 Link to comment Share on other sites More sharing options...
Austin-Rover Posted September 6, 2019 Share Posted September 6, 2019 Mine catches and crunches the gears changing down from 4th to 3rd. Remedied by pausing in neutral before engaging 3rd, or doubling the clutch. You'll be putting a new clutch in it to cure that problem, and even then it still won't be great. Do your gear linkages make a squeaky rattle when driving too? Link to comment Share on other sites More sharing options...
dollywobbler Posted September 9, 2019 Author Share Posted September 9, 2019 No squeaky rattles, just a quiet meshing sort of a noise when clutch is depressed or changing gear, and a crunch if third is rushed. Today, I drove from Tiverton to home in the Invacar, but that wasn't the major achievement of the day. This was! Yes, rear wiper installed and functional. Can't seem to operate the washer. Not even sure how you do that. Also looked at the non-working HRW and rear fog lamp. HRW was just a missing fuse. Fog lamp is more mysterious. Pressing the button does nothing, so I wonder if the relay or switch are to blame. I tried swapping relays but all that managed to do was put the engine management light on. Despite labelling, the relays for fog lamps and HRW clearly have other uses too... ETCHY, Craig the Princess, Shep Shepherd and 3 others 6 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now