Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By strangeangel
      I thought I'd start a thread for this as I'll probably end up asking all sorts of questions, given that this is my first 'proper' Citroën.
       
      So... the ground clearance lever won't go all the way to the highest setting (all others work), which is bad 'cos the book says I need it to do that in order to check the LHM level. It feels like something's seized, so I don't want to force it. Any ideas for a plan of attack would be much appreciated.
       
      Next up are the wheels. I now have a set of 205 pepperpots that have just gone off for powder coating & I need to get some tyres for them. The handbook says the car should have 165/70R14s on, the wheels came with 185/65R14 on. Any thoughts about what size I should get please? Cheers.
       
    • By snagglepuss
      Didn't bother to do a collection thread as was a 30min drive so fairly boring.
       
      Yesterday I won this
       

       
      Which is effectively going to replace the civic and the xantia.
       

       
      Picked car from a bodywork guy in foreign lands (Yorkshire).
       
      First thoughts are that I think it has been sitting for a while but started straight up. Apart from service bits and potentially a cambelt everything seems to be good with it. Comes pre dented.
       
      Current is differently abled tax so that will need to be changed.
       
      Windscreen has small crack in passenger side.
       
      Runs really cold, this is after 30 miles of motorway

       
      Mind you it honks. Properly honks. Not as much as the focus I got from Shadow but not far off.
       

       
      List of jobs
       
      Oil change
      Spark plugs
      Air filter
      Thermostat
      Rear boot struts
      Front discs and pads
      Cam belt plus bits
      Ball joints
      Drop links
      Rear anti roll bar bushes
      Stereo code
      Windscreen crack
      Swimming pool emptied from boot wheel well
      Seal rear light clusters
       
      And a big does of cleaning
    • By PhilA
      Well, here we go again. I bit the bullet and bought me this.
       

       

       
      It's still up at the lot right now, there will be a miniature Collection Thread embedded in this thread when I go fetch it. Hopefully if the weather's good, that'll be this weekend.
       
      So, what is it?
       
      As the title suggests, it's a 1951 Pontiac Chieftain.
      It's got a flat-head straight eight hiding in the engine bay, 4.4 litres of it. It's bolted to a 4-speed Hydra-Matic Drive gearbox. No torque converter on this one, just a fluid coupling. 116 horses at a screaming 3700 RPM, 240lb/ft at 2000. It idles at 375 RPM. Redline just shy of 4k.
      Did I mention it's quite big? Sixteen foot eight from end to end and it seats six people in comfort. Every door has a quarter-light, too. Comfort is provided by properly sized tyres and (quite surprisingly for the age of it) double independent wishbone front suspension. Steering is via worm/wheel steering box so is moderately direct and the brakes are hydraulic drums all round. Modern and scientific!
       
      It's an honest example; looks to have had a "restoration" about 15-20 years back and the rust is coming through the seams and filler. The bottoms of the door skins have gone, the bottom of the A-pillars have gone (the front doors, on a single hinge a piece still open and close with one finger!) And it's got a couple holes and blebs in all the places you would expect.
      Not much electrical works. It needs to be completely rewired because someone has "converted" it to 12V. Thankfully it was originally negative ground so that's a good start. Gauges and such can be driven from a 6V bucking converter.
      Engine has had some work done on it- starts and runs nicely with very little greb coming out of the exhaust. It's got a few gaskets that need replacing and the tappets need some major adjustment, the gearbox engages gears correctly, the steering is okay but has a lot of slack in the center and the brakes work well, dont sink or feel spongy but need adjustment.
       
      More to come. I'll post up more pictures when I get it home.
       
       
      --Phil
×
×
  • Create New...