Jump to content

1988 Citroen 2CV - what have I bought


eifion

Recommended Posts

As I mentioned in the Show Us Your 2CV thread, I recently bought a 1988 Citroen 2CV special after spending a few months looking at dozens of them for sale on the Internet. I've started a thread as owning it is going to raise a lot of questions. As an example of how much I know about them, I spent a good couple of minutes pulling at things on the dashboard looking for the bonnet release before working out that it should be opened from the outside.

849322730_2019-05-0417_13_15.thumb.jpg.acf40092ae3ff2f495aa9286dacd0552.jpg

The main two problems I'm going to have to sort out with it are the rust on the sills, front floor and toeboard (I'll get someone who knows what they're going to do this) and the electrics. It has, weirdly, been fitted with a second battery and I've got no idea why so investigating that will be fun.

engine_bay.thumb.jpg.651951b0332b8a822c6181144d0a94da.jpg

 

Anyway it's nice to join the list of 2CV owners here and I'm looking forward to taking it out on the road once it's all done.

 

Link to comment
Share on other sites

2CVs are wonderful, totally unlike anything else to drive and utterly addictive.  As DW says there's a huge fanbase and lots of helpful owners clubs out there so help and advice is plentiful when you need it.

Yours looks pretty smart, it's very similar to the one my mate had a while back which I borrowed* off him at every available opportunity. One thing that's worth pointing out if you're not aware already is that it would be worth replacing these old cardboard hoses under the bonnet, as they can be a fire risk.

 

Link to comment
Share on other sites

14 hours ago, eifion said:

As I mentioned in the Show Us Your 2CV thread, I recently bought a 1988 Citroen 2CV special after spending a few months looking at dozens of them for sale on the Internet. I've started a thread as owning it is going to raise a lot of questions. As an example of how much I know about them, I spent a good couple of minutes pulling at things on the dashboard looking for the bonnet release before working out that it should be opened from the outside.

849322730_2019-05-0417_13_15.thumb.jpg.acf40092ae3ff2f495aa9286dacd0552.jpg

The main two problems I'm going to have to sort out with it are the rust on the sills, front floor and toeboard (I'll get someone who knows what they're going to do this) and the electrics. It has, weirdly, been fitted with a second battery and I've got no idea why so investigating that will be fun.

engine_bay.thumb.jpg.651951b0332b8a822c6181144d0a94da.jpg

 

Anyway it's nice to join the list of 2CV owners here and I'm looking forward to taking it out on the road once it's all done.

 

For some reason the oil breather hose has been disconnected from the air filter housing. Also in the same area the wiring loom is sitting on the exhaust heat exchanger. Move it up with a cable tie round the filter housing. All that yellow wiring is non-standard and may lead to a tracker / immobiliser.

 

Plus I think it's got a Dyane fan housing.

Link to comment
Share on other sites

17 minutes ago, richardmorris said:

For some reason the oil breather hose has been disconnected from the air filter housing. Also in the same area the wiring loom is sitting on the exhaust heat exchanger. Move it up with a cable tie round the filter housing. All that yellow wiring is non-standard and may lead to a tracker / immobiliser.

 

Plus I think it's got a Dyane fan housing.

Yeah, there's a separate small filter and the end of the oil breather hose for some reason. Ta for the warning about the wiring. The Dyane fan housing thing makes sense as I couldn't work out what the covered over hole at the top on the right was.

Link to comment
Share on other sites

A tracker would be sensible. I have a Toyota Landcruiser that was nicked and luckily I got it back. Any interesting vehicle that is popular and can be broke for parts is sadly vulnerable - a 2CV would even fit straight into a lorry. etc. In France 2CV prices have skyrocketed so there will be an international 'trade'. 

I dont go anywhere these days without a steering wheel lock and a big chain that goes thro one wheel.

Link to comment
Share on other sites

4 hours ago, richardmorris said:

Plus I think it's got a Dyane fan housing.

Hopefully it's still fitted to a Dyane engine :)   Higher compression so a couple of extra horses.

Years ago I could tell just by looking at the engine number. AM2 rings a bell....

Link to comment
Share on other sites

12 hours ago, eifion said:

That first photo I put up does flatter it a bit. Before I can legally take it out for a spin I've got to sort out things like this:

 

rust.thumb.jpg.823eeb4cb12967d8747831a74f4ffbbd.jpg

Bit of plywood and a rubber mat. Bosh, job done!

Link to comment
Share on other sites

20 minutes ago, Matty said:

Bit of plywood and a rubber mat. Bosh, job done!

On reflection,  if the rust is that bad there, whip the seats out fully to get a good idea of the rest. It may be that new sills and floors will be cheaper than patching as at least you have good metal to weld to.

The other place to check is the rear seat belt mounts. This is an mot fail, but people have passed this hurdle by presenting the car for mot with no rear seat or seatbelts.

Link to comment
Share on other sites

27 minutes ago, richardmorris said:

Was it a Brooklands of Wrexham car? My first 2cv was D299stu and the second CX D708rtu. Tu was a Wrexham and Denbighshire code.

I don't know that much of its history yet, but it's possible. It did (I'm guessing) come from the same place as the 2CV on the cover of Issue 5 of Jalopy, which was E857ATU.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...