Andyrew Posted November 21, 2021 Author Share Posted November 21, 2021 Stink hunting part 2 With the rear footwell looking like this i felt the only option was the more harsh approach. Ive found 5 lighters so far and one menthol ciggy. Ive no idea what that goop is that its stuck too. I dont want to know either. Hmmmmm With the interior now out smell has reduced but its still there. Time for some scrubbing. UltraWomble, Six-cylinder, rusty998 and 2 others 5 Link to comment Share on other sites More sharing options...
Andyrew Posted November 21, 2021 Author Share Posted November 21, 2021 A very strong mix of APC, and a brush later. Hand brake area now much better Rear quarter upper panels 50/50. Carpet was taken outside soaked in a harsh mix of APC, scrubbed with a stiff brush , rinsed, scrubbed, rinsed again, and left to dry. And will recieve another going over before install The rear footwell was indeed grim. Rear panels done and looking much brighter inside. Headliner was also fully cleaned (as much as i could) with an APC soaked cloth. Schaefft, Shirley Knott, Six-cylinder and 18 others 20 1 Link to comment Share on other sites More sharing options...
Dan302 Posted November 21, 2021 Share Posted November 21, 2021 Cleaning really filthy car interiors is so satisfying! Tenmil Socket and Andyrew 2 Link to comment Share on other sites More sharing options...
Andyrew Posted November 21, 2021 Author Share Posted November 21, 2021 With the interior out it seemed now was the ideal time to try and make the little tin box marginally better to be in. 20211121_161955.mp4 LightBulbFun, Six-cylinder, Mrs6C and 4 others 6 1 Link to comment Share on other sites More sharing options...
Tadhg Tiogar Posted November 21, 2021 Share Posted November 21, 2021 8 minutes ago, Andyrew said: With the interior out it seemed now was the ideal time to try and make the little tin box marginally better to be in. 20211121_161955.mp4 19.95 MB · 0 downloads "Is anyone there.....? Knock once for Yes, twice for No. Knock three times on the ceiling (if you want me)...." Link to comment Share on other sites More sharing options...
garethj Posted November 21, 2021 Share Posted November 21, 2021 21 minutes ago, Andyrew said: With the interior out it seemed now was the ideal time to try and make the little tin box marginally better to be in. 20211121_161955.mp4 19.95 MB · 0 downloads Shitting hell, that’s quite an improvement! Link to comment Share on other sites More sharing options...
Andyrew Posted November 21, 2021 Author Share Posted November 21, 2021 Whilst i havent actually driven this little shite on the road, noise is a fairly common complaint and as i had a 10pk of sheets (that was ment for the mx5 ) to hand i cracked on. I just went round knocking on bits of the car adding bits where it felt needed. Both quarters recieved more and behind the interior panels was also done. The boot will recieve the same treatment. The upper interior panels came out for cleaning behind on the car and the panel itself tonight aswell. Tonight the interior all went back in. Im please to report the smell is vastly improved. Will chuck some pics up once the seats have dried. Tomorrow the car recieves all filters, new plugs and oil. Im not doing it, again like the Astra recently , my nefew and his father are going to be using the car for educational purposes. LightBulbFun, Mrs6C and Tickman 3 Link to comment Share on other sites More sharing options...
garethj Posted November 21, 2021 Share Posted November 21, 2021 Have you found where the red car ends and the blue one begins? Link to comment Share on other sites More sharing options...
Andyrew Posted November 21, 2021 Author Share Posted November 21, 2021 23 minutes ago, garethj said: Have you found where the red car ends and the blue one begins? I have, Its been done to a rather good standard and ive not found anything of worry. The seams are straight and fully plug welded in. The joints for the replacement quarter are nicely done. Overall im happy with it. Even if the bodyshop had bought all new panels its the same repair process. Plug welding and butt welding etc etc. I knew the car was salvage repair but i was concerned about finding a badly bashed out rear end behind the obviously replaced bumper and large volumes of wob. So to find panels replaced instead of beaten into a rough shape and bogged up is fine with me. Tickman, AnthonyG, Mrs6C and 4 others 7 Link to comment Share on other sites More sharing options...
Andyrew Posted November 22, 2021 Author Share Posted November 22, 2021 Live updates being through of the servicing. Now thats a plug gap! Asimo, beko1987, theshadow and 2 others 3 1 1 Link to comment Share on other sites More sharing options...
grogee Posted November 22, 2021 Share Posted November 22, 2021 14 hours ago, Andyrew said: I have, Its been done to a rather good standard and ive not found anything of worry. The seams are straight and fully plug welded in. The joints for the replacement quarter are nicely done. Overall im happy with it. Even if the bodyshop had bought all new panels its the same repair process. Plug welding and butt welding etc etc. I knew the car was salvage repair but i was concerned about finding a badly bashed out rear end behind the obviously replaced bumper and large volumes of wob. So to find panels replaced instead of beaten into a rough shape and bogged up is fine with me. Huhhhuhh. Hunnhhhh. Huh-huhhhh. He said, "butt". I may have missed this but what is the black sticky soundproofing stuff, and where does one go to get it? Link to comment Share on other sites More sharing options...
Andyrew Posted November 22, 2021 Author Share Posted November 22, 2021 4 hours ago, grogee said: I may have missed this but what is the black sticky soundproofing stuff, and where does one go to get it? Its this stuff theres many ways to buy similar stuff, its just bitumen sheet. A cheaper option is roof flashing tape. I work at a motor parts shop so thats where i get it. grogee, Six-cylinder and Ted Eggs 2 1 Link to comment Share on other sites More sharing options...
Andyrew Posted November 22, 2021 Author Share Posted November 22, 2021 Ive not looked under the car so these pics are a first for me too, Seems to a bit of a leak from somewhere too , ill clean this off and monitor it. theshadow, LightBulbFun and Mrs6C 3 Link to comment Share on other sites More sharing options...
Andyrew Posted November 22, 2021 Author Share Posted November 22, 2021 LightBulbFun, Tickman, Mrs6C and 3 others 6 Link to comment Share on other sites More sharing options...
UltraWomble Posted November 22, 2021 Share Posted November 22, 2021 3 hours ago, Andyrew said: A cheaper option is roof flashing tape. Which is what Ive used on the Citroen and on @JrWomble Pug 108 with very good results grogee and Andyrew 2 Link to comment Share on other sites More sharing options...
Six-cylinder Posted November 22, 2021 Share Posted November 22, 2021 37 minutes ago, Andyrew said: Looking at how under serviced this car is I am amazed how well it run round the M25 and up the M1. Link to comment Share on other sites More sharing options...
Andyrew Posted November 23, 2021 Author Share Posted November 23, 2021 Steel drum solo, 20211123_123942.mp4 LightBulbFun 1 Link to comment Share on other sites More sharing options...
Andyrew Posted November 23, 2021 Author Share Posted November 23, 2021 20211123_130636.mp4 Mrs6C, Shirley Knott, Dan302 and 1 other 4 Link to comment Share on other sites More sharing options...
Andyrew Posted November 23, 2021 Author Share Posted November 23, 2021 Interior all cleaned and reinstalled. Few nooks on the dash to be cleaned out and the door cards will be coming off to clean behind them aswell but overall im please with the result. Ive pushed the boat out and ordered some mats for it aswell which should freshen things up too. Floatylight, garethj, LightBulbFun and 10 others 13 Link to comment Share on other sites More sharing options...
Andyrew Posted November 23, 2021 Author Share Posted November 23, 2021 Like every panel on this little pug the front bumper big ugly chrome bit has taken a bump, more than twice. Enhance A used one of these is nudging 50 quid! Get out. Time for some filler and the same steel wheel silver i used on the mx5 wheels. The long peice was repaired but the paint was taking ages to dry so no photos tonight. I like this colour and it looks far better than the chrome. Some sorry looking door mirrors needed some attention so they joined in. Omg, Audi copy cat. Wibble, Minimad5, Tenmil Socket and 10 others 13 Link to comment Share on other sites More sharing options...
Minimad5 Posted November 23, 2021 Share Posted November 23, 2021 Looking pretty smart this now, keepnup the good work. What's the plan - Keep it and use it, or flip it for a little profit ? What shade of silver is that you've used, wouldn't mind doing the Steels on the P4 a similar colour ? Link to comment Share on other sites More sharing options...
Andyrew Posted November 23, 2021 Author Share Posted November 23, 2021 3 hours ago, Minimad5 said: What's the plan - Keep it and use it, or flip it for a little profit ? Run it for a month or two, its actually for my good lady to it to see if she likes it enough to replace her jimny as thats juicey and tax is high (i dont think it will suceed as she love the jimny) Didnt want to spend £1500+ on a nicer one only to hate it then have the ball ache of selling it. This ones cheap enough to gamble on as it was only £600. I say "only" 600 quid as in compared to others on the market the going rate seems to start around 1k up. When im finished with it my boss is interested in it as a delivery car at what it owes me and it will be ran into the ground , but if its a decent little steer ill bang it on here first incase someone wants it. The budget is £150 to make it nice. So it will be up for grabs at £750. Minimad5, LightBulbFun and BeEP 3 Link to comment Share on other sites More sharing options...
Andyrew Posted November 23, 2021 Author Share Posted November 23, 2021 19 minutes ago, Minimad5 said: What shade of silver is that you've used, wouldn't mind doing the Steels on the P4 a similar colour ? Minimad5 and LightBulbFun 2 Link to comment Share on other sites More sharing options...
Andyrew Posted November 23, 2021 Author Share Posted November 23, 2021 Also so far ive found £2.80, So the budget is £152.80! Spend so far Full Service & wiper £30 Wheel trims £12.50 Tailored Mats £10 Door and boot seal kit £45 Headlight £30 3 tins of KJH red paint £10 £137.50 so far! But cant think of much else that is needed. Six-cylinder, LightBulbFun and Shirley Knott 3 Link to comment Share on other sites More sharing options...
Andyrew Posted November 23, 2021 Author Share Posted November 23, 2021 The shifter bush was rather worn causing a wobbly lever and poor selection , i repaired a fiat before by using a plastic sheet as a shim. I was going to try the same on here but i see a video on youtube and the guy just wound a couple of screws into the surrounding voids, i used some m5 bolts, looks a bit more of a bodge but is A much simpler fix to perform, a spray of lube and it now selects lovely. LightBulbFun, Shirley Knott, Mrs6C and 2 others 5 Link to comment Share on other sites More sharing options...
Andyrew Posted November 24, 2021 Author Share Posted November 24, 2021 New muck catchers installed. Theres really not much but the body work to address now, perfect job for the cold evenings. Doh! Tenmil Socket, rainagain, LightBulbFun and 1 other 4 Link to comment Share on other sites More sharing options...
Andyrew Posted November 24, 2021 Author Share Posted November 24, 2021 Strawberry ripple, The front wing has suffered many a bump, it has a rusted old bit of damage. Ripples along from the recent damage that goes along the door and this has cracked a previous repair. A crack in a little* bit of filler. The quickest fix would have been a wing and a door in red and i did find some about an hour away, but that would be another £100 and its just not in the budget i want to stick too. Red paint is cheap at work and ive got a large amount of the consumables needed. The wings already got a bit off filler in it so im not bother about a bit more going in. So time to try and bash it back into shape. Better, closer , warmer That filler crack got alot bigger tho. Cant be that much filler in there. . . . Can there? Actual lolz. Its about 10mm thick. From looking at the drivers side of the car its been painted by a different place than the people who did the rear quarter swap. The paint finish and quality of the repair is the opposite end of the scale, All this filler is for one deep is dent and instead of removing the arch liner to knock the dent out they have wobbed the shit out of it. LightBulbFun, Tickman, Shirley Knott and 1 other 4 Link to comment Share on other sites More sharing options...
Andyrew Posted November 24, 2021 Author Share Posted November 24, 2021 Filler ground out, hammer and dolly gets the wing much straighter, needs some time to get it better but it was getting late so i called it a night. Kringle, Scruffy Bodger, Landy Mann and 14 others 17 Link to comment Share on other sites More sharing options...
Andyrew Posted November 27, 2021 Author Share Posted November 27, 2021 All filler, no killer. After talking to a friend / customer at work about the little pug, i mentioned the front wing im repairing and he knew of a pair that have been replaced with only a minor dent up the top from a car that had a parking barrier come down on it. He said they was near the scrap pile when he lasted visited the place so if they are there monday when he goes he will pick them out for me. With that in mind i moved to doing the offside rear quarter. Just Like the front wing this had been repaired badly then damaged again , this has cracked the filler that was looking a bit thick. With how the front was fixed i knew there was going to be more to this. I started chipping at it but it was still well bonded. Fibre disc on the grinder time. The guy or gal must have had shares in the bodyfiller supplier. Filler now relocated around the workshop. Safrane has now doubled in value as its a dusty barnfind. LightBulbFun, BeEP, Tickman and 2 others 5 Link to comment Share on other sites More sharing options...
Andyrew Posted November 27, 2021 Author Share Posted November 27, 2021 Why so much filler? Just like the wing instead of popping the arch liner / interior panel out and banging the dent out they have gone for the faster route and just used a tone on bog. A dent puller or spotter had been used to yank the dent out in around 6 places and they have pulled on it hard. With how hard its been pulled it left a load of raised dimples. Instead of knocking them back , filler has been built up to level them out, doesnt make much sense to me but time is money for any bodyshop. The low spot at the top of the arch My good friend gary was at the workshop he weilded a hammer while i put pressure on from the inside and held the dolly ,Some bashing and a wizz over with the DA gets it much much flater. Scruffy Bodger, Dyslexic Viking, rainagain and 10 others 13 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now