garbaldy Posted April 13, 2020 Author Share Posted April 13, 2020 Inlet Manifold back on and egr blank on with bolts rather than the Allen bolts. Engine removed from engine stand and hung from crane once more, flywheel was different so now has van one complete with clutch and gearbox refitted to engine, now to attempt cleaning the box as it's also bloody manky. I'm still waiting on the engine oil being delivered from that manol offer that was posted up here, was ment to arrive last Wednesday but still not here yet. And now for a question does anyone know where the gearbox fill level is or even where you fill it. And what oil does the box take ? Coprolalia, Jim Bell and The Moog 3 Link to comment Share on other sites More sharing options...
garbaldy Posted April 13, 2020 Author Share Posted April 13, 2020 And since this exhaust will no longer be of use to me it's here of anyone wants it @DodgyBastard for the inastate. Coprolalia, The Moog and Jim Bell 3 Link to comment Share on other sites More sharing options...
DodgyBastard Posted April 13, 2020 Share Posted April 13, 2020 44 minutes ago, garbaldy said: And since this exhaust will no longer be of use to me it's here of anyone wants it @DodgyBastard for the inastate. I'd take it, do you recon it would fit in an Acclaim? Link to comment Share on other sites More sharing options...
garbaldy Posted April 13, 2020 Author Share Posted April 13, 2020 It might if it was split but I wouldnt guarantee it though. I'll have a measure up. Link to comment Share on other sites More sharing options...
garbaldy Posted April 13, 2020 Author Share Posted April 13, 2020 The crossmember was looking a bit thick with 32 years of crap so using scrapers then thinners had it looking pretty good and a quick coat of industrial paint smartened it up nicely, it's the same paint I stuck on the block too so hopefully is durable enough. Coprolalia and Tickman 2 Link to comment Share on other sites More sharing options...
garbaldy Posted April 13, 2020 Author Share Posted April 13, 2020 Looks like the driveshafts will have to be rebooted as are pretty perished and split so hopefully the new ones I have will fit if not I'll have to wait on the postie bringing me some. More spares that I've held onto for longer than many sensible people would and im sure the oil filter is the same. Jim Bell 1 Link to comment Share on other sites More sharing options...
garbaldy Posted April 13, 2020 Author Share Posted April 13, 2020 Engine pushed back in place and since the sump is freshly painted I sat the engine on a load of rags and slid it under the shell. Engine lifted up into place and bolted in jobs a goodun and now that's the engine crane finished with so can be put away again. The Moog, Jim Bell, Coprolalia and 3 others 6 Link to comment Share on other sites More sharing options...
loserone Posted April 13, 2020 Share Posted April 13, 2020 Excellent ?? garbaldy 1 Link to comment Share on other sites More sharing options...
garbaldy Posted April 13, 2020 Author Share Posted April 13, 2020 In and ready for all the finishing touches. It was a doddle and popped straight in which was expected after the amount of stuff I've changed. Bottom rung the rad sits on was derusted and painted too before the rad was fitted. And with the exception of two pipes that it plumbed in and waiting coolant and oils. Have one coolant pipe to make fit up the back which is the heater matrix one but apart from that it's driveshafts and done. stuboy, Tickman, Lacquer Peel and 1 other 4 Link to comment Share on other sites More sharing options...
DodgyBastard Posted April 13, 2020 Share Posted April 13, 2020 5 hours ago, garbaldy said: It might if it was split but I wouldnt guarantee it though. I'll have a measure up. How much for the exhaust anyway? I'd definitely take the rear and middle sections. Link to comment Share on other sites More sharing options...
garbaldy Posted April 13, 2020 Author Share Posted April 13, 2020 27 minutes ago, DodgyBastard said: How much for the exhaust anyway? I'd definitely take the rear and middle sections. You can have it as i certainly won't be refitting an NA engine again. Don't suppose you would have a spare alternator that would fit do you as this one has never charged since I bought the van. Link to comment Share on other sites More sharing options...
DodgyBastard Posted April 13, 2020 Share Posted April 13, 2020 1 hour ago, garbaldy said: You can have it as i certainly won't be refitting an NA engine again. Don't suppose you would have a spare alternator that would fit do you as this one has never charged since I bought the van. I'll have a look through my spares but I don't think I have one. Link to comment Share on other sites More sharing options...
garbaldy Posted April 19, 2020 Author Share Posted April 19, 2020 So this is fully assembled now and water and oiled up so time to start the beast, After fitting a new fuel filter I pumped the primer and had fuel at filter housing bleed nipple then cracked of the return banjo on the distributer pump and pumped the primer till I had fuel seeping out, After cracking all injectors loose and turning the engine over on the starter I had fuel seeping at all four, time for start and after some cranking she's alive so I let it warm up a bit then while running I cracked each injector one at a time and got the required engine miss from all so that's her bled up properly unfortunately she won't take throttle. I went through the whole system and I've blew through fuel lines back to tank and this was the return banjo gummed to fuck with veg oil, why anyone sticks this shite in there tank I've no idea, the old xud started and ran no probs so that would suggest there's nothing wrong with the fuel delivery but a cleaned it all back anyway and the tank is pure dizzle anyway so im a bit stumped now. Any ideas anyone ? Jim Bell and The Moog 2 Link to comment Share on other sites More sharing options...
garbaldy Posted April 20, 2020 Author Share Posted April 20, 2020 Can anyone think of anything I may have missed as I'm stumped. Link to comment Share on other sites More sharing options...
somewhatfoolish Posted April 20, 2020 Share Posted April 20, 2020 Is the fuel rack even moving? Given the ZOMGUMMEDUPWITHVEG scenario it seems feasible that the pump is also internally gummed and stuck at idle. garbaldy 1 Link to comment Share on other sites More sharing options...
garbaldy Posted April 20, 2020 Author Share Posted April 20, 2020 1 hour ago, somewhatfoolish said: Is the fuel rack even moving? Given the ZOMGUMMEDUPWITHVEG scenario it seems feasible that the pump is also internally gummed and stuck at idle. What's a fuel rack then ? I've had the engine up to full temp twice now and you could feel a bit of warmth in the pump so I was hoping it would clear anything that may be gummed up. Link to comment Share on other sites More sharing options...
somewhatfoolish Posted April 20, 2020 Share Posted April 20, 2020 The internal mechanism in the fuel pump that takes the throttle input, typically via a governor, and converts it into extra juice being injected; in conventional pumps it is literally a rack and pinion that does this job. Link to comment Share on other sites More sharing options...
garbaldy Posted April 20, 2020 Author Share Posted April 20, 2020 Don't suppose you know where it is and how do i check it out ? Link to comment Share on other sites More sharing options...
somewhatfoolish Posted April 20, 2020 Share Posted April 20, 2020 CF's description of pump tinkering may help? The bosch pump shown does not have a conventional rack but the effect is the same and there are plenty of bits that can become clagged with sticky gunk. garbaldy 1 Link to comment Share on other sites More sharing options...
garbaldy Posted April 20, 2020 Author Share Posted April 20, 2020 I'll have a read of that thread looks interesting never seen it before. Thanks. Link to comment Share on other sites More sharing options...
alf892 Posted April 21, 2020 Share Posted April 21, 2020 On the gearbox oil you just put the correct measured quantity in. If you fill to the filler plug it will throw it out the breather and the driveshafts with distribute it beautifully. i think the Bosch/CAV type varies fuel delivery by changing the angle of the swash plate. What happens when you give it some throttle? garbaldy 1 Link to comment Share on other sites More sharing options...
garbaldy Posted April 21, 2020 Author Share Posted April 21, 2020 Read CFs thread and I'm not sure I fancy ripping the pump to bits, think i might just carry on working on the van hoping it will fix itself, in other words leave it til last. Both the vans driveshafts are pretty well worn and the centre bearing is shot plus all four gators are split aswell as both steering rack gaitors, in an ideal world someone more sensible than me would have done the rack ones while the engine was out but hey ho, I can't find any either so I've ordered some of those shitty universal ones in the hope my luck changes, The shafts from the berlingo looked the same so I tried one end in the box and they fitted and stuck the other end in the hub and they also fitted which was lucky, they are pretty close lengthwise so I stuck the one shaft in and appart from being thicker shafts they're a perfect fit, at least it saves me fitting gators and now I'm glad removed the engine complete with subframe. I also now have two litres of gear oil for the box but I still can't find how to fill it or a level bung strange. Link to comment Share on other sites More sharing options...
garbaldy Posted April 21, 2020 Author Share Posted April 21, 2020 16 minutes ago, alf892 said: On the gearbox oil you just put the correct measured quantity in. If you fill to the filler plug it will throw it out the breather and the driveshafts with distribute it beautifully. i think the Bosch/CAV type varies fuel delivery by changing the angle of the swash plate. What happens when you give it some throttle? Don't suppose you know where the fill plug is though. If you have a look at the video I posted above I rev it up on it well sort of. Link to comment Share on other sites More sharing options...
alf892 Posted April 21, 2020 Share Posted April 21, 2020 I really can't remember on the gearbox filler........last xud box I had dealings with was in a 305 van 30 years ago! The main thing was about just putting the measure amount in because I hadn't come across that before........and filled it up. Driver came back next day and it was dripping in oil! Are you sure fuel lines are clear as that looks/sounds like lack of fuel. I would go ripping a pump apart either.......far too many things to go ping garbaldy 1 Link to comment Share on other sites More sharing options...
Lacquer Peel Posted April 21, 2020 Share Posted April 21, 2020 Soz about the tensioner bolt, veg oil and bodged RTV sealant sump gasket. The original sump was even worse, this was the OK but now knackered one off the DW8 engine and the sealant was all I could find quickly. Is it idling ok now? It is a tuned pump and may need some adjustments to the fuelling. It was running fine when I was moving it about more often but I remember what a PITA it was to start and keep running when we were putting it on the trailer. Probably down to the years old veg... The filler plug for the gearbox is the 22NM bolt here. rainagain and garbaldy 1 1 Link to comment Share on other sites More sharing options...
garbaldy Posted April 21, 2020 Author Share Posted April 21, 2020 It's r 1 minute ago, Lacquer Peel said: Soz about the tensioner bolt, veg oil and bodged RTV sealant sump gasket. The original sump was even worse, this was the OK but now knackered one off the DW8 engine and the sealant was all I could find quickly. Is it idling ok now? It is a tuned pump and may need some adjustments to the fuelling. It was running fine when I was moving it about more often but I remember what a PITA it was to start and keep running when we were putting it on the trailer. Probably down to the years old veg... The filler plug for the gearbox is the 22NM bolt here. Not your fault though as the bolt is made of cheese and Probably been in and out loads of times anyway plus a right balache while in the vehicle as no room, I've ran 10s of thousand's of miles on free veg many years ago and collected many many ibcs worth and hate the stuff these days, it's just a right pain now and it's jelled really badly it's like chewing gum. And here was me thinking that was mr citroen that had used that stuff haha, the sump didn't leak till I pressure washer the engine down so again not your fault. Yes the veg is well jelled up and I've got straight diesel going through it's veins now and had the engine up to temp twice hoping it would clear, I remeber it was a bit lazy when collected but it did rev up which it won't now, the engine does sound really sweet as per the above vid so im looking forward to getting it going properly that's for sure and I wasnt expecting a simple job from the start hence the long wait till I got started on the job, which to be honest hasn't helped with the veg jelling issue I guess. I dont think this box has that plug as it's the vans original box I didn't use yours as the clutch is a pull and the van is a push clutch. Anyhoo you gave me the engine so all it cost was fuel to collect so no need for apologies I'm still well chuffed with the way it's coming along and youl get to see it someday for a proper Thank you. Lacquer Peel 1 Link to comment Share on other sites More sharing options...
garbaldy Posted April 21, 2020 Author Share Posted April 21, 2020 23 minutes ago, alf892 said: I really can't remember on the gearbox filler........last xud box I had dealings with was in a 305 van 30 years ago! The main thing was about just putting the measure amount in because I hadn't come across that before........and filled it up. Driver came back next day and it was dripping in oil! Are you sure fuel lines are clear as that looks/sounds like lack of fuel. I would go ripping a pump apart either.......far too many things to go ping Yes I first though fuel starvation but new filter pipes blew back and the fact the original engine ran okay makes you wonder, I might try some cleaner through it as it will start and run up to temp just not keen to rev. Link to comment Share on other sites More sharing options...
alf892 Posted April 21, 2020 Share Posted April 21, 2020 Good idea get it good and hot ........and just run through the pipe work slowly even splitting each joint. When you think you've checked things loads sometimes it's easy to miss something. garbaldy 1 Link to comment Share on other sites More sharing options...
garbaldy Posted April 22, 2020 Author Share Posted April 22, 2020 13 hours ago, Lacquer Peel said: The filler plug for the gearbox is the 22NM bolt here. Bloody hell look at this and to think i hunted for ages for the fill level bung, helps when you know where to look haha. Thanks Mr Peel Lacquer Peel and alf892 2 Link to comment Share on other sites More sharing options...
Lacquer Peel Posted April 22, 2020 Share Posted April 22, 2020 If the engine still isn't running well post-lockdown I'm happy to help trace the issue. Hopefully it is a simple fix and not the pump irreparably gummed up with ancient veg. alf892 and garbaldy 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now