Angrydicky Posted March 6, 2019 Share Posted March 6, 2019 Some of you will know I work for a company called Past Parts which is a classic car brake restoration company. They specialise in resleeving and rebuilding of pre-1990 master, wheel and slave cylinders, servos and calipers. This year I am trying to get some folk together for monthly evening tours. These will be held on the second Tuesday of the month from 6:30ish and go on for around two hours. They are extremely informal (I will make sure of that) and are relaxed, friendly evenings. You will be offered a cup of tea and a biscuit, given a brief talk on Past Parts history and what we do, then will be shown the rebuild process, and the mountains of new old stock parts we have here. Trigger came along last year with some of the East Coast Retros chaps and I think he had a good time! The first one this year is next Tuesday (12th March) and the location is below: Unit 4, Chase RoadNorthern Way Industrial EstateBury St. EdmundsSuffolkIP32 6NT If anyone's at a loose end and wants to come along next Tuesday evening, please register interest below! I'll be there, hopefully in something interesting, if not than the ropey Clio of many shiters. Timewaster, Lacquer Peel, Semi-C and 4 others 7 Link to comment Share on other sites More sharing options...
wuvvum Posted March 6, 2019 Share Posted March 6, 2019 If I bring my Volvo caliper with me, could you do a quick refurb on it while I'm drinking my tea? Angrydicky 1 Link to comment Share on other sites More sharing options...
Angrydicky Posted March 6, 2019 Author Share Posted March 6, 2019 Nice try! I suppose I could pump out your pistons which will provide an interesting demonstration though purplebargeken and wuvvum 2 Link to comment Share on other sites More sharing options...
Timewaster Posted March 6, 2019 Share Posted March 6, 2019 I've spent more than enough time in that building thank you. Actually it was unit 3 but that's not the point. (I used to work for Past parts now defunct parent company in 1998). Link to comment Share on other sites More sharing options...
purplebargeken Posted March 6, 2019 Share Posted March 6, 2019 That sounds really cool. Link to comment Share on other sites More sharing options...
wuvvum Posted March 6, 2019 Share Posted March 6, 2019 Might be worth adding an "Event" tag to the thread to make it more noticeable. Link to comment Share on other sites More sharing options...
95 quid Peugeot Posted March 6, 2019 Share Posted March 6, 2019 Lovely offer thanks. Gutted I work away during the week Link to comment Share on other sites More sharing options...
Brodders Posted March 8, 2019 Share Posted March 8, 2019 I normally work in an office about five minutes away from you. Unfortunately I am over in Belgium for the majority of next week and will miss this. However, if you have more dates planned for the year please pop them up on here. It sounds rather interesting. Angrydicky 1 Link to comment Share on other sites More sharing options...
Skizzer Posted March 9, 2019 Share Posted March 9, 2019 Great idea. As a past and probably future Past Parts happy customer I’d be very interested; unfortunately it’s almost two hours on the train from Liverpool St to Bury St E so tricky to make it happen Angrydicky 1 Link to comment Share on other sites More sharing options...
Spottedlaurel Posted March 9, 2019 Share Posted March 9, 2019 Great idea. As a past and probably future Past Parts happy customer I’d be very interested; unfortunately it’s almost two hours on the train from Liverpool St to Bury St E so tricky to make it happen Get the train up to Diss and you could borrow one of mine. Serious. This Tuesday could be good for me, and I need to take a trip down Bury way at some point soon. Angrydicky and Skizzer 2 Link to comment Share on other sites More sharing options...
Skizzer Posted March 9, 2019 Share Posted March 9, 2019 Get the train up to Diss and you could borrow one of mine. Serious. This Tuesday could be good for me, and I need to take a trip down Bury way at some point soon.That’s an extremely good offer! Thank you, I’d love to. I can’t do this Tuesday but might go for another in the summer if this is a recurring thing. Angrydicky 1 Link to comment Share on other sites More sharing options...
I_am_Diesel Posted March 9, 2019 Share Posted March 9, 2019 I might be able to pop over, I will check and let you know. Angrydicky 1 Link to comment Share on other sites More sharing options...
Spottedlaurel Posted March 9, 2019 Share Posted March 9, 2019 That’s an extremely good offer! Thank you, I’d love to. I can’t do this Tuesday but might go for another in the summer if this is a recurring thing. That's absolutely fine, the offer stands for as long as I have something spare, working and with T&T. Angrydicky and Skizzer 2 Link to comment Share on other sites More sharing options...
Skizzer Posted March 9, 2019 Share Posted March 9, 2019 Fab, thanks again. In case anyone needs gingering up about this, here’s what Past Parts did with the clutch master cylinder on my SD1: So, I have FINALLY got around to fixing this. The bits arrived back about 5 weeks after I sent them off for refurb, but I was busy then went on holiday so the poor Rover has been sat on ramps on the drive since the end of June. Past Parts did a grand job, remanufacturing both the master and slave cylinders so they looked like new. Thanks to all above for the recommendation. Before:Clutch master cylinder - before refurb by Skizzer, on Flickr After:Clutch master cylinder - after refurb by Past Parts by Skizzer, on Flickr Cost was a smidge more than NOS replacements including the postage and stuff, but as others have said there's every chance that the 'new' parts have been sitting in various warehouses for 40 years so may not be much better than the knackered old ones. Anyway, Past Parts = recommended. Rimmers, to their credit, cancelled my order for NOS ones over the phone with no quibble and gave me my money back. Refitting was the reverse of removal, basically, except a lot easier for the bolts not being rusty any more. I sourced a new gasket for the cast aluminium master cylinder/steel bulkhead join, but made my own from trim tape (double sided sticky foam) for the slave cylinder; might order a proper one as I'm not sure what the respective castings are made of and don't want any chance of them reacting. It might have taken the best part of two months but, for once, I did a job on the car that worked: the clutch pedal now feels lovely and the car now has all four feet on solid ground. Quite pleased. Fingers crossed I don't find a puddle of clutch fluid on the drive tomorrow.Obviously you can’t see all the re-sleeving and other work but you get the gist. Three and a half years later the clutch hydraulics are still tippy-top, of course. wuvvum, Squire_Dawson, Lacquer Peel and 1 other 4 Link to comment Share on other sites More sharing options...
Saabnut Posted March 9, 2019 Share Posted March 9, 2019 I would love to see this, sadly distance prevents me joining this time. With a bit more warning it might be do-able! Angrydicky 1 Link to comment Share on other sites More sharing options...
Squire_Dawson Posted March 9, 2019 Share Posted March 9, 2019 Me too, I love factory visits but making the trip from Lancashire sadly isn't feasible. Past Parts should be supported for their services keeping old cars roadworthy. I have been very pleased and Angrydicky is a great chap, going above and beyond to help people. RobT and Angrydicky 2 Link to comment Share on other sites More sharing options...
Angrydicky Posted March 9, 2019 Author Share Posted March 9, 2019 We are planning to do one a month until October, as long as we can get a minimum of 3 or 4 people per month (up to maybe 10 or 12) it'll be on! It should be of interest to shiters as the old stock that remains tends to be the stuff that no one wants. So while all the Jag, MG etc stuff has sold years ago, there's 50 Unipart master cylinder kits for MK1 Rover 800s, loads of wheel cylinders and balljoints for Peugeot 305, Maestro, Montego, Nissan Sunny, just about every piece of prime tat imaginable Glad the master cylinder is still giving good service Martin! It's an old chestnut, but the prices do seem expensive until you realise that you get an effectively new unit back. A lot of work goes into all jobs and personally I love working on stuff belonging to more obscure cars. Sometimes parts are an issue, but we don't easily give up! Here's a set of 1970s Bendix calipers recently completed for a customer with a Peugeot J7. Got sets in for a Renault Caravelle, Austin Ambassador, and a Matra Bagheera at the moment (which seem to be the same as Rancho). DVee8, tapir, groovylee and 5 others 8 Link to comment Share on other sites More sharing options...
wuvvum Posted March 12, 2019 Share Posted March 12, 2019 Couldn't make it tonight, still stuck at work. Hopefully next month. Angrydicky 1 Link to comment Share on other sites More sharing options...
Spottedlaurel Posted March 12, 2019 Share Posted March 12, 2019 A very interesting evening, some real skill and craftsmanship going into the remanufacture/refurbishment of these components. And what a treasure trove of NOS parts! Good to hear how busy they are. Difficult to believe that doing such specialist work on random old cars can generate so much business Many thanks to Richard for inviting us along, and also for Colin in letting me drive his LS400 despite being a few bob short of the agreed price on the wheels he was selling me (embarrassed blush). Semi-C, wuvvum and Angrydicky 3 Link to comment Share on other sites More sharing options...
Semi-C Posted March 12, 2019 Share Posted March 12, 2019 A servo assisted dose of thanks to Richard and Nigel for the enlightening evening and hospitality. What a wonderful experience to see what happens behind the scenes and beneath the plating, not to mention the seemingly never ending shelves of assorted components and their equally varied packaging and branding. Just when I thought a blustery Tuesday evening couldn’t get better, I managed to blag a go in Spottedlaurel’s luscious 1600 Sunny, treats! I won’t sleep tonight. Angrydicky and RobT 2 Link to comment Share on other sites More sharing options...
Timewaster Posted March 12, 2019 Share Posted March 12, 2019 Nigel is a legend. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now