Jump to content

Attn East Anglian shiters


Angrydicky

Recommended Posts

Some of you will know I work for a company called Past Parts which is a classic car brake restoration company. They specialise in resleeving and rebuilding of pre-1990 master, wheel and slave cylinders, servos and calipers.

 

This year I am trying to get some folk together for monthly evening tours. These will be held on the second Tuesday of the month from 6:30ish and go on for around two hours.

 

They are extremely informal (I will make sure of that) and are relaxed, friendly evenings. You will be offered a cup of tea and a biscuit, given a brief talk on Past Parts history and what we do, then will be shown the rebuild process, and the mountains of new old stock parts we have here.

 

Trigger came along last year with some of the East Coast Retros chaps and I think he had a good time!

 

The first one this year is next Tuesday (12th March) and the location is below:

 

Unit 4, Chase Road

Northern Way Industrial Estate

Bury St. Edmunds

Suffolk

IP32 6NT

 

If anyone's at a loose end and wants to come along next Tuesday evening, please register interest below! I'll be there, hopefully in something interesting, if not than the ropey Clio of many shiters.

Link to comment
Share on other sites

Great idea. As a past and probably future Past Parts happy customer I’d be very interested; unfortunately it’s almost two hours on the train from Liverpool St to Bury St E so tricky to make it happen :-(

 

Get the train up to Diss and you could borrow one of mine. Serious.

 

This Tuesday could be good for me, and I need to take a trip down Bury way at some point soon.

Link to comment
Share on other sites

Get the train up to Diss and you could borrow one of mine. Serious.

 

This Tuesday could be good for me, and I need to take a trip down Bury way at some point soon.

That’s an extremely good offer! Thank you, I’d love to. I can’t do this Tuesday but might go for another in the summer if this is a recurring thing.

Link to comment
Share on other sites

Fab, thanks again.

 

In case anyone needs gingering up about this, here’s what Past Parts did with the clutch master cylinder on my SD1:

 

So, I have FINALLY got around to fixing this. The bits arrived back about 5 weeks after I sent them off for refurb, but I was busy then went on holiday so the poor Rover has been sat on ramps on the drive since the end of June.

 

Past Parts did a grand job, remanufacturing both the master and slave cylinders so they looked like new. Thanks to all above for the recommendation.

Before:

20540009602_4153cd433e_k.jpg

Clutch master cylinder - before refurb by Skizzer, on Flickr

 

After:

20555377591_50e11e32da_k.jpg

Clutch master cylinder - after refurb by Past Parts by Skizzer, on Flickr

 

Cost was a smidge more than NOS replacements including the postage and stuff, but as others have said there's every chance that the 'new' parts have been sitting in various warehouses for 40 years so may not be much better than the knackered old ones. Anyway, Past Parts = recommended. Rimmers, to their credit, cancelled my order for NOS ones over the phone with no quibble and gave me my money back.

 

Refitting was the reverse of removal, basically, except a lot easier for the bolts not being rusty any more. I sourced a new gasket for the cast aluminium master cylinder/steel bulkhead join, but made my own from trim tape (double sided sticky foam) for the slave cylinder; might order a proper one as I'm not sure what the respective castings are made of and don't want any chance of them reacting.

 

It might have taken the best part of two months but, for once, I did a job on the car that worked: the clutch pedal now feels lovely and the car now has all four feet on solid ground. Quite pleased. Fingers crossed I don't find a puddle of clutch fluid on the drive tomorrow.

Obviously you can’t see all the re-sleeving and other work but you get the gist. Three and a half years later the clutch hydraulics are still tippy-top, of course.

Link to comment
Share on other sites

We are planning to do one a month until October, as long as we can get a minimum of 3 or 4 people per month (up to maybe 10 or 12) it'll be on!

 

It should be of interest to shiters as the old stock that remains tends to be the stuff that no one wants. So while all the Jag, MG etc stuff has sold years ago, there's 50 Unipart master cylinder kits for MK1 Rover 800s, loads of wheel cylinders and balljoints for Peugeot 305, Maestro, Montego, Nissan Sunny, just about every piece of prime tat imaginable

 

Glad the master cylinder is still giving good service Martin! It's an old chestnut, but the prices do seem expensive until you realise that you get an effectively new unit back. A lot of work goes into all jobs and personally I love working on stuff belonging to more obscure cars. Sometimes parts are an issue, but we don't easily give up!

 

Here's a set of 1970s Bendix calipers recently completed for a customer with a Peugeot J7. Got sets in for a Renault Caravelle, Austin Ambassador, and a Matra Bagheera at the moment (which seem to be the same as Rancho).

 

post-3865-0-38422800-1552159558_thumb.jpg

 

post-3865-0-99940400-1552159569_thumb.jpg

Link to comment
Share on other sites

A very interesting evening, some real skill and craftsmanship going into the remanufacture/refurbishment of these components. And what a treasure trove of NOS parts!

 

Good to hear how busy they are. Difficult to believe that doing such specialist work on random old cars can generate so much business

 

Many thanks to Richard for inviting us along, and also for Colin in letting me drive his LS400 despite being a few bob short of the agreed price on the wheels he was selling me (embarrassed blush).

Link to comment
Share on other sites

A servo assisted dose of thanks to Richard and Nigel for the enlightening evening and hospitality. What a wonderful experience to see what happens behind the scenes and beneath the plating, not to mention the seemingly never ending shelves of assorted components and their equally varied packaging and branding.

 

Just when I thought a blustery Tuesday evening couldn’t get better, I managed to blag a go in Spottedlaurel’s luscious 1600 Sunny, treats!

 

I won’t sleep tonight.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...