andy29 Posted October 17, 2020 Share Posted October 17, 2020 As long as I can replace the bolts I suppose but I'll go as carefully as I can for now anyway. Got some PlusGas on em. Can't say any more for tonight but it was definitely somewhere around the cat and the engine itself. At the age the car is I'm expecting everything to look shitty but the leak's getting bigger so hopefully there's some evidence there. No need to go out of your way but any information is very helpful. Link to comment Share on other sites More sharing options...
andy29 Posted October 20, 2020 Share Posted October 20, 2020 On 10/13/2020 at 10:37 AM, juular said: It's a little bit of investment in time and money but it is an investment nonetheless, and in the future it'll repay you many times over. The main hurdle is storage / work space and the initial outlay for the machine, gas, PPE and the metal itself. The running costs after that are very very small. If you consider that your average welding job on an old heap costs about a hundred quid it doesn't take long for it to repay you. Plus you get to keep the tools and knowledge. When I joined this forum a year ago I'd never even considered welding but it really surprised me how quickly it can be picked up. The most difficult part is in cutting and shaping new metal to fit, but on an old shitter that just has to pass an MOT that matters much less as you can just chop out the rot and weld new plates over. There are loads of people on here that can help out too. It also opens the option of taking on other more desirable chod that may be passed over by others because of rust, and getting it quite cheaply. It gets very addictive though! I'm starting to really hope I can find the room to put a machine one day. I really must look into it, it seems like a fantastic ability to have. And the difference in cost between paying someone to do it vs being able to do it yourself, in your spare time, with equipment you've already invested in is going to become very big very quickly isn't it (unless the supplies for it are expensive, I wouldn't know). Plus you know exactly what you've done, so if you do get skilled enough for important parts, you know it's going to be safe etc. I can see how it's addictive, I love it when I can fix something that most people would have just tossed away, on top of knowing that YOU did it. juular and sierraman 2 Link to comment Share on other sites More sharing options...
sierraman Posted October 20, 2020 Share Posted October 20, 2020 Does your manifold look like this one? andy29 1 Link to comment Share on other sites More sharing options...
hairnet Posted October 20, 2020 Share Posted October 20, 2020 Is this ok Left - the one bought thread and pitch is fine Right - the oe taken off I was expecting more thread thru the nut but hey Is the bigger cone a problem? Thanks Link to comment Share on other sites More sharing options...
Tetleysmooth Posted October 20, 2020 Share Posted October 20, 2020 WD 40 v Plusgas, what's the best for loosening yer nuts? Link to comment Share on other sites More sharing options...
sierraman Posted October 20, 2020 Share Posted October 20, 2020 1 hour ago, Tetleysmooth said: WD 40 v Plusgas, what's the best for loosening yer nuts? Anything but WD40, it’s ok for kids bikes or getting marker off a painted wall. Other than that it’s mammothly shit. ECP QX stuff is 600ml and only about £2-3. Link to comment Share on other sites More sharing options...
andy29 Posted October 21, 2020 Share Posted October 21, 2020 7 hours ago, sierraman said: Does your manifold look like this one? Thank you for taking the time to do that sierraman, I think it does, I think I can see that left hand bolt - but a proper look might have to be put on hold for a few days because I needed to use it today and now it seems like I'm going to be waiting for the rain to sod off. I'm being very careful with the heat shield because it was already a bit broken up at the top when I got it in '08, however I guess because the garage fixed it up at that time (included in the sale) the bolts/nuts on it came off stupidly easy and I don't think they even needed the PlusGas I put on them, so that was something handy. Link to comment Share on other sites More sharing options...
sierraman Posted October 21, 2020 Share Posted October 21, 2020 Ill take some more pictures when I’ve finished work. Link to comment Share on other sites More sharing options...
andy29 Posted October 28, 2020 Share Posted October 28, 2020 Sorry Sierraman, not been able to look at the exhaust manifold for a few days anyway. I'll get back in there when I get a chance... Well I almost organised a pre-mot but somehow completely failed to get across what I want them to do - they were trying to be helpful - I guess I'll be more direct and just ask them to give me a quote for any welding they think is needed to get it through an MOT. Or maybe just say sod it and wait for the MOT in mid December when the old one's about to run out, and get the official verdict? Fully expecting to have it off the road for a while when it runs out anyway unless I'm incredibly lucky with it. It was only really because I'd like to get on with it and it would be better to know before I spend money on a jack, stands etc. Quite happy for this to become a bit of a project. Only want that welding decided on before the MOT expires so I can get it done while I can still drive it. My god the amount of HubNut, Furious Driving and a bunch of others I've watched, times I've read the Haynes manual, it's about time I did something. And oh boy what shite I would go after if I knew how to do enough. I know this isn't a help forum for dummies so I hope I didn't shit up this thread too much. Link to comment Share on other sites More sharing options...
loserone Posted October 28, 2020 Share Posted October 28, 2020 That' exactly what this Stupid Question Amnesty thread is for, I'd have thought? The Moog, BeEP and spike60 3 Link to comment Share on other sites More sharing options...
catsinthewelder Posted October 28, 2020 Share Posted October 28, 2020 @andy29 A big part of being able to weld up a car is having somewhere to work. If you can find a spacious garage with electricity it will be a hell of a lot easier than working on muddy grass in the rain and wind or having to be careful not to give the neighbours kids arc eye. Lacquer Peel 1 Link to comment Share on other sites More sharing options...
andy29 Posted October 29, 2020 Share Posted October 29, 2020 18 hours ago, loserone said: That' exactly what this Stupid Question Amnesty thread is for, I'd have thought? Fair enough 😀 17 hours ago, catsinthewelder said: @andy29 A big part of being able to weld up a car is having somewhere to work. If you can find a spacious garage with electricity it will be a hell of a lot easier than working on muddy grass in the rain and wind or having to be careful not to give the neighbours kids arc eye. Uhhhhh yeah that might be the awkward part. Well I have a concrete driveway... enough room for me and a machine though. Did wonder about needing to be careful with other people around 😬 Does what the guy does in this video resemble a good job? Because I know some people who make videos are a bit questionable. Would probably need to look out for a used machine to be honest but it's already looking a little less impossible... Link to comment Share on other sites More sharing options...
Tickman Posted October 29, 2020 Share Posted October 29, 2020 3 hours ago, andy29 said: Fair enough 😀 Uhhhhh yeah that might be the awkward part. Well I have a concrete driveway... enough room for me and a machine though. Did wonder about needing to be careful with other people around 😬 Does what the guy does in this video resemble a good job? Because I know some people who make videos are a bit questionable. Would probably need to look out for a used machine to be honest but it's already looking a little less impossible... The video isn't bad at all really. Second hand machines can be hit and miss and you do get what you pay for. andy29 1 Link to comment Share on other sites More sharing options...
juular Posted October 29, 2020 Share Posted October 29, 2020 On 10/20/2020 at 2:12 PM, andy29 said: And the difference in cost between paying someone to do it vs being able to do it yourself, in your spare time, with equipment you've already invested in is going to become very big very quickly isn't it (unless the supplies for it are expensive, I wouldn't know). . It doesn't need to be that expensive to run. The main outlay is the welder and gas bottle. A cheap machine is totally fine but it will make the learning curve a bit steeper as you won't really be able to get the perfect setup (the adjustments on cheap welders are quite coarse) and you won't know how much of the difficulty is down to yourself or down to the machine. A second hand well regarded machine is an ok idea but if you get one with knackered wire feed and liner and have to go out and buy a regulator, wire and tips you might be approaching the price of a new one with all that stuff included. PPE is no more than a helmet and gloves. Aldi are currently selling dirt cheap helmets and sometimes have gloves too. They don't need to be expensive. You'll need a grinder. I've been using a £20 Aldi one for years and it came with a big pack of discs. The gas can be a bit of a difficult one to swallow initially as the best weld will come from something like argon mix and you ideally want to pay a refundable deposit on a big bottle like you'd do on a calor gas bottle. The little disposable bottles work out very expensive and hardly last. The big bottle gas itself will last a long time and is not that expensive to get topped up. A lot of people use CO2 from fire extinguishers or pub gas which you can sometimes get for free. It might make the welding a bit more hit and miss than a nice bottle of argon / co2 but if cost is a problem then it's a cheap way in. You can go gasless, then you can weld in the wind outside but the learning curve is steeper again and the welds can be messy. You might get hacked off with that in no time. A reel of wire lasts for ages. Steel itself is cheap if you use the right places. B and Q and Wickes etc sell overpriced shite. A stockholder will sell you a 2m x 1m x 1.2mm sheet for under £50 and it will go on forever. I used a big offcut from that to start practicing and used the rest to make repair panels, water tanks and gas locker for my campervan, camper bed brackets, hinges, still have lots left over. Some metal fab places give away offcuts for nothing, just need to make sure it's not galvanised or stainless. Other consumables like cutting discs, flap wheels etc are only a couple of quid each. The ongoing costs are really very small once you get over the initial hump. Alan_Green, sierraman, Talbot and 2 others 2 3 Link to comment Share on other sites More sharing options...
cort1977 Posted November 4, 2020 Share Posted November 4, 2020 Thanks for writing that, very useful. Link to comment Share on other sites More sharing options...
andy29 Posted November 5, 2020 Share Posted November 5, 2020 On 10/29/2020 at 6:52 AM, Tickman said: The video isn't bad at all really. Second hand machines can be hit and miss and you do get what you pay for. On 10/29/2020 at 12:37 PM, juular said: It doesn't need to be that expensive to run. The main outlay is the welder and gas bottle. A cheap machine is totally fine but it will make the learning curve a bit steeper as you won't really be able to get the perfect setup (the adjustments on cheap welders are quite coarse) and you won't know how much of the difficulty is down to yourself or down to the machine. A second hand well regarded machine is an ok idea but if you get one with knackered wire feed and liner and have to go out and buy a regulator, wire and tips you might be approaching the price of a new one with all that stuff included. PPE is no more than a helmet and gloves. Aldi are currently selling dirt cheap helmets and sometimes have gloves too. They don't need to be expensive. You'll need a grinder. I've been using a £20 Aldi one for years and it came with a big pack of discs. The gas can be a bit of a difficult one to swallow initially as the best weld will come from something like argon mix and you ideally want to pay a refundable deposit on a big bottle like you'd do on a calor gas bottle. The little disposable bottles work out very expensive and hardly last. The big bottle gas itself will last a long time and is not that expensive to get topped up. A lot of people use CO2 from fire extinguishers or pub gas which you can sometimes get for free. It might make the welding a bit more hit and miss than a nice bottle of argon / co2 but if cost is a problem then it's a cheap way in. You can go gasless, then you can weld in the wind outside but the learning curve is steeper again and the welds can be messy. You might get hacked off with that in no time. A reel of wire lasts for ages. Steel itself is cheap if you use the right places. B and Q and Wickes etc sell overpriced shite. A stockholder will sell you a 2m x 1m x 1.2mm sheet for under £50 and it will go on forever. I used a big offcut from that to start practicing and used the rest to make repair panels, water tanks and gas locker for my campervan, camper bed brackets, hinges, still have lots left over. Some metal fab places give away offcuts for nothing, just need to make sure it's not galvanised or stainless. Other consumables like cutting discs, flap wheels etc are only a couple of quid each. The ongoing costs are really very small once you get over the initial hump. Glad the video's a good one, it seemed pretty in depth and clear to me, but I wouldn't have even known about the positioning of the replacement metal so I wouldn't have had a clue! I wouldn't rely on a single person's videos anyway. Thank you for writing that out Juular. It'll be so useful to get me started. I would not expect to look for welding equipment at Aldi so that's handy to know. Definitely would need to have a play on some metal first, not surprised B&Q/Wickes are like that for buying the metal, I'll need to find out what places are even around me. Such a useful and money saving skill to have. juular 1 Link to comment Share on other sites More sharing options...
Tenmil Socket Posted November 7, 2020 Share Posted November 7, 2020 I bought a gazebo and the metal frame is very flimsy. Therefore I’ve bought some timber to make a new square/cube frame. What’s the best way to construct/fasten in the corners? There’s going to be 3 pieces joining in each corner so I need to avoid screws hitting each other. Link to comment Share on other sites More sharing options...
sierraman Posted November 7, 2020 Share Posted November 7, 2020 21 minutes ago, Tenmil Socket said: I bought a gazebo and the metal frame is very flimsy. Therefore I’ve bought some timber to make a new square/cube frame. What’s the best way to construct/fasten in the corners? There’s going to be 3 pieces joining in each corner so I need to avoid screws hitting each other. Corner blocks Link to comment Share on other sites More sharing options...
Tenmil Socket Posted November 7, 2020 Share Posted November 7, 2020 2 minutes ago, sierraman said: Corner blocks What’s this? Link to comment Share on other sites More sharing options...
sierraman Posted November 7, 2020 Share Posted November 7, 2020 You use them to make furniture. They’re like plastic blocks you screw through. Thinking on you could just cut a halving joint? Link to comment Share on other sites More sharing options...
Tenmil Socket Posted November 7, 2020 Share Posted November 7, 2020 6 minutes ago, sierraman said: You use them to make furniture. They’re like plastic blocks you screw through. Thinking on you could just cut a halving joint? I’m using 3x2 timber but not got a clue about joinery 😞 Link to comment Share on other sites More sharing options...
sierraman Posted November 7, 2020 Share Posted November 7, 2020 Screw a square frame for the end then cut a notch in the span timber so it sits in the end frame on top of it. Link to comment Share on other sites More sharing options...
Tenmil Socket Posted November 7, 2020 Share Posted November 7, 2020 8 minutes ago, sierraman said: Screw a square frame for the end then cut a notch in the span timber so it sits in the end frame on top of it. Ok I’ll see what I can do cheers Link to comment Share on other sites More sharing options...
Mr Pastry Posted November 7, 2020 Share Posted November 7, 2020 9 minutes ago, Tenmil Socket said: I’m using 3x2 timber but not got a clue about joinery 😞 You can get steel angle brackets in a range of sizes. From about 2x2 inches up to hefty shelf brackets, they make good corner joints for this sort of thing. Don't use screws that are too fat or too long as they will split the timber. Also, don't screw into the end grain, as it will not grip properly. Use Turbodrive or similar screws FTW - they are self-drilling, and you can put them in very quickly with a cordless drill/driver. Link to comment Share on other sites More sharing options...
Tenmil Socket Posted November 7, 2020 Share Posted November 7, 2020 4 minutes ago, Mr Pastry said: You can get steel angle brackets in a range of sizes. From about 2x2 inches up to hefty shelf brackets, they make good corner joints for this sort of thing. Don't use screws that are too fat or too long as they will split the timber. Also, don't screw into the end grain, as it will not grip properly. Use Turbodrive or similar screws FTW - they are self-drilling, and you can put them in very quickly with a cordless drill/driver. Ok great. I’ve got a decent driver and a metal case full of different size Howdens screws. Link to comment Share on other sites More sharing options...
Tenmil Socket Posted November 7, 2020 Share Posted November 7, 2020 8 hours ago, Tenmil Socket said: Ok great. I’ve got a decent driver and a metal case full of different size Howdens screws. Well.... I spent all day building this frame and it looked tremendous. Unfortunately (some how) I measured it wrong and the roof didn't fit 😣 I was 40cm out 😬 Anyway, I was p***ed off with myself! I arranged more timber from B&Q and treated it today. Take two tomorrow.... Link to comment Share on other sites More sharing options...
Tenmil Socket Posted November 9, 2020 Share Posted November 9, 2020 On 11/7/2020 at 7:18 PM, Tenmil Socket said: Well.... I spent all day building this frame and it looked tremendous. Unfortunately (some how) I measured it wrong and the roof didn't fit 😣 I was 40cm out 😬 Anyway, I was p***ed off with myself! I arranged more timber from B&Q and treated it today. Take two tomorrow.... Managed to put this together yesterday in the drizzle. It’s not finished yet. I still want to brace the corners with the excess* timber. I bought tarpaulin for three of the sides but it was about 20 cms too short. The packaging did say approximate dimensions but 20 cm! sierraman, Jerzy Woking, juular and 2 others 5 Link to comment Share on other sites More sharing options...
andy29 Posted November 20, 2020 Share Posted November 20, 2020 On 10/20/2020 at 4:25 PM, sierraman said: Does your manifold look like this one? I got to have a better look under the heat shield at last... still being a bastard to get off, can't see what it's still caught on but I'm being extra careful as this could be its last month on the road. Doesn't seem the same as the one you posted Sierraman, from what I can see it does tie up with the diagram in the Haynes book, so hopefully that's a good thing. Pic of right where the '1' arrow is pointing: Link to comment Share on other sites More sharing options...
sierraman Posted November 20, 2020 Share Posted November 20, 2020 I’d establish first if it’s the manifold blowing or the gasket, sometimes those type blow in between cyl 2 & 3, it usually cracks. What you could do if this is the case and what I’d do given the circumstances would be if there is a crack try some intumescent sealant, smear it in to the crack then let it cure. Might do the trick. Cast welding something like this is unreliable as they’ll usually crack again. andy29 1 Link to comment Share on other sites More sharing options...
andy29 Posted November 21, 2020 Share Posted November 21, 2020 Lovely, must get on that and work out where it's coming from then. A tube of sealant for either part is hardly going to break the bank. Very good to know what I'd be going for, I didn't know about intumescent sealant, I do now. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now