Jump to content

Autoshite's official for sale/wanted thread


Slartibartfast

Recommended Posts

Long shot but, anyone breaking a mk 2 Focus 1.6 tdci? I need the engine crank sensor connector and about 6 inchs of the wiring loom attached to it.

Mr Ford wants 2 grand for a new wiring loom, all the local breakers I've asked cheapest is £60. 

My tame mechanic says this is a common defect and as far as he is aware no repair kits are available, the one currently fitted is beyond repair. 

Or does anyone know of an aftermarket repair kit available? t.i.a.

Link to comment
Share on other sites

Anyone got a ball joint splitter they no longer use?

 

post-52-0-24795600-1551972239_thumb.jpeg

 

There's new ones on Ebay for £6.50 inc post, so can offer a fiver. ;)

 

This chap certainly did a good job of cleaning his up before he offered it for sale at £8! :-

https://www.ebay.co.uk/itm/BALL-JOINT-REMOVER-SPLITTER/123669890354

Link to comment
Share on other sites

Anyone got a ball joint splitter they no longer use?

 

image.jpeg

 

There's new ones on Ebay for £6.50 inc post, so can offer a fiver. ;)

 

This chap certainly did a good job of cleaning his up before he offered it for sale at £8! :-

https://www.ebay.co.uk/itm/BALL-JOINT-REMOVER-SPLITTER/123669890354

What is that strange code on the last pic?
Link to comment
Share on other sites

I'm selling some free diags, I have a Delphi diags machine. 

 

I've only just got it all set back up on a dedicated laptop...

 

so if your close and need codes read, my machine will read just about any sensor on most cars... drop me a message and pop by.

 

Yeah me too I can do Citroen or Peugeot at the minute, BMW incoming, South Cumbria area.

Link to comment
Share on other sites

Yeah me too I can do Citroen or Peugeot at the minute, BMW incoming, South Cumbria area.

I think my Delphi works on all the ones u mentioned, id certainly like to try it. Works on my wife's Citroen but then it's petrol, it will work. Id like to try it on the HDI because the cheap ones don't work.

Works on my Saab perfect which is diesel so I imagine it will work on the PSA's.

 

I'm Hull area.

 

 

Sent from my Nexus 6P using Tapatalk

Link to comment
Share on other sites

Would anyone be interested in my Roland Camm-1 Plotter?  It's an old PNC-910 model and I've got an adapter to take it from serial port to USB.

 

I haven't used it since we moved house and am unlikely to find the time or inclination to do so again. I will include all my stock of vinyl for a sensible offer.

 

It is very similar to this model https://www.ebay.co.uk/itm/Roland-Camm-1-PNC-960-Sign-Maker-As-Photos/162621516933?hash=item25dcff6c85:g:-8EAAOSwz-5ZiHu9

s-l1600.jpg

 

I have a digital copy of the manual also.

 

£200 ono?

Link to comment
Share on other sites

Mk2 Audi TT tfsi exhaust. From a 2011 TT removed at 6 months old. Was going to use the pipe off it but it’s just taking up space. It’s in brilliant condition. £40

 

I have been sent one of these offers that they do from time to time on Ebay where you pay no more than £1 final value fee......let me know if you want me to whack this on there for you. You may well have done already (not checked)... Oh btw that offer expires midnight Monday I think....pm if you do....as long as its listed before then. May do alright as a buy it now

 

J

Link to comment
Share on other sites

Paddy hopkirk roof rack. 401U. No idea what it mounts too. Was told 90s Vauxhall but it didn’t fit my cavalier nor does it fit my carlton. £10. Stoke on Trent collection. I’m down in Milton Keynes Thursday night if that helps

post-17429-0-70804100-1552301296_thumb.jpeg

post-17429-0-08806000-1552301315_thumb.jpeg

post-17429-0-90925800-1552301336_thumb.jpeg

Link to comment
Share on other sites

Paddy hopkirk roof rack. 401U. No idea what it mounts too. Was told 90s Vauxhall but it didn’t fit my cavalier nor does it fit my carlton. £10. Stoke on Trent collection. I’m down in Milton Keynes Thursday night if that helps

 

Not sure if that retailed as a 401U, given that those bolt-in feet are ready-riveted on. The feet look like the Mont Blanc / Paddy Hopkirk / Halfords K50 ones that you'd substitute for the usual flat rectangular foot.

 

The K50 applications are

  • Ford Escort IV, IVa, V, 4door / 5door, 1990-2000
  • Ford Escort V,  Estate, 1995-2000
  • Ford Orion II, 4door, 1990-1993
  • Peugeot 405, 4door / Estate, 1988-1997
  • Peugeot 406, 4door / Estate, 1996-2004
  • Saab 900, 5door, 1993-1998
  • Saab 9-3, 5door,1998-2002
  • Vauxhall / Opel Cavalier III, 4door / 5door, 1988-1995
  • Vauxhall / Opel Vectra, 4door / 5door, 1995-2002
Link to comment
Share on other sites

Found these badges I'd forgot about. These were all removed legally over the years!

 

The Mitsubishi badges were off my Dads old 86 L300 Van including the Colt owners badge. He had the Van as a part payment for money he was owed for a Building job. Not one of his better moves as I recall due to the rust and more rust.

 

The rest were removed from scrap cars / panels as a kid.

 

£1 each? Plus postage or collect from WS9 area. Or bid me for the lot.

 

post-3802-0-42416900-1552500141_thumb.jpg

 

post-3802-0-40602400-1552500160_thumb.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...