Ghosty Posted November 15, 2018 Author Share Posted November 15, 2018 Those are what are hiding behind the trims, actually. They need a going over in satin black at some point. Link to comment Share on other sites More sharing options...
Timewaster Posted November 15, 2018 Share Posted November 15, 2018 Do any of you guys notify your insurance when you change wheels etc?Just wondering because every time I asked they tended to say I needed a specialist policy, or engineers report, or......No one ever said 'that's fine sir'.20 odd years ago I put TSWs on my 205Git and dutifully told the insurance company and their response was "if they are stolen then we will only replace with standard parts" and that was it. I'm really not convinced that was right, but that was the response they gave. I think I would just go with the "as bought" defence. How are you supposed to know what wheels we standard fit? (I know we know but they don't know we know.) Link to comment Share on other sites More sharing options...
yes oui si Posted November 16, 2018 Share Posted November 16, 2018 Even worse than fraud wheels! I don't trust spacers, all that extra length on the studs etc. It just doesn't seem a good idea to me. I've got a feeling buggering about with offsets upsets the castor/ackerman angles too, but I don't know any details to prove that.Yeah, none of that is correct. Caster is independent of offset, Ackerman is cancelled by equal changes on both sides, studs don't care about length - they are torqued down perpendicular to the hub face and don't experience any side loadings. I'd say don't do it, for no other reason than they're minilite reps and minilites are fucking awful. If however you find wheels you want in a different pcd, then 15-20mm adapters are easily available for around £100 a set. Link to comment Share on other sites More sharing options...
Ghosty Posted November 17, 2018 Author Share Posted November 17, 2018 Probably not bothering with wheels unless something unmissable comes up. I finally bothered to straighten the steering wheel today (I'd mounted it one spline off). Resulting interior shot: dome, They_all_do_that_sir, SierraMikeHotel and 4 others 7 Link to comment Share on other sites More sharing options...
They_all_do_that_sir Posted November 17, 2018 Share Posted November 17, 2018 Probably not bothering with wheels unless something unmissable comes up. I finally bothered to straighten the steering wheel today (I'd mounted it one spline off). Resulting interior shot: I love these and the R8 rovers because so much glass. Lovely light airy interiors, with minimal amounts of dashboard = lovely Sent from my TA-1012 using Tapatalk Lacquer Peel, SierraMikeHotel and Ghosty 3 Link to comment Share on other sites More sharing options...
They_all_do_that_sir Posted November 17, 2018 Share Posted November 17, 2018 In fact jaguar have ripped this off to great effect recently. How the main dash is low and minimal with the sort of wrap around bit that extends into the door tops. It's my favourite modern interior Sent from my TA-1012 using Tapatalk jumpingjehovahs 1 Link to comment Share on other sites More sharing options...
Dick Longbridge Posted November 17, 2018 Share Posted November 17, 2018 In fact jaguar have ripped this off to great effect recently. How the main dash is low and minimal with the sort of wrap around bit that extends into the door tops. It's my favourite modern interiorSent from my TA-1012 using TapatalkHonda used the same idea (but way more showy) in the Prelude of the same era. They_all_do_that_sir, Joey spud and HillmanImp 3 Link to comment Share on other sites More sharing options...
They_all_do_that_sir Posted November 17, 2018 Share Posted November 17, 2018 Honda used the same idea (but way more showy) in the Prelude of the same era. 1992-honda-prelude-8.jpgI think that style is dash perfection Sent from my TA-1012 using Tapatalk bigfella2 and Dick Longbridge 2 Link to comment Share on other sites More sharing options...
Ghosty Posted November 17, 2018 Author Share Posted November 17, 2018 Ah, spaceship. IMG_0914 by max_burton, on Flickr They_all_do_that_sir 1 Link to comment Share on other sites More sharing options...
They_all_do_that_sir Posted November 17, 2018 Share Posted November 17, 2018 Ah, spaceship. IMG_0914 by max_burton, on FlickrDidn't you have a prelude or am I imagining things Sent from my TA-1012 using Tapatalk Link to comment Share on other sites More sharing options...
Ghosty Posted November 17, 2018 Author Share Posted November 17, 2018 Yes, that's it above. SRi05 has it now. They_all_do_that_sir 1 Link to comment Share on other sites More sharing options...
Dick Longbridge Posted November 17, 2018 Share Posted November 17, 2018 The Honda design crew were definitely smoking the right stuff in the early 90s. They got pretty much everything just right. Link to comment Share on other sites More sharing options...
dollywobbler Posted November 17, 2018 Share Posted November 17, 2018 The Honda design crew were definitely smoking the right stuff in the early 90s. They got pretty much everything just right. Aye. Definitely Peak Honda. Ghosty 1 Link to comment Share on other sites More sharing options...
Noel Tidybeard Posted November 17, 2018 Share Posted November 17, 2018 Ah, spaceship. IMG_0914 by max_burton, on Flickr that's not a spaceship! this is a spaceship SiC 1 Link to comment Share on other sites More sharing options...
Ghosty Posted November 19, 2018 Author Share Posted November 19, 2018 After about two weeks of fucking about, the guy selling me the parcel shelf and headrests claims to have posted them. Progress, if they don't show up by Friday I might have to go nuclear though. the Civic FB groups aren't that interesting anyway. Link to comment Share on other sites More sharing options...
dome Posted November 19, 2018 Share Posted November 19, 2018 the Civic FB groups aren't that interesting anyway. I joined a couple of Type R groups when I had mine and thought they were full of "challenging" types. I take that all back now after joining a Corolla group Matts_Rusty_Bus 1 Link to comment Share on other sites More sharing options...
Ghosty Posted November 22, 2018 Author Share Posted November 22, 2018 Parcel shelf and headrests get. Spot my oversight... mk2_craig 1 Link to comment Share on other sites More sharing options...
Ghosty Posted December 27, 2018 Author Share Posted December 27, 2018 This has been working faultlessly recently. It's been used for a bit of all sorts, couple of good long runs to stretch its legs. My parents have been using it more than me, though I told them to be careful (I wasn't keen on this) as I didn't want them just running about locally in it, not getting up to temp etc, in case the worst happened and it HGFd. It HGFd. Water channel as ever because D-Series. Somehow we ended up with the wrong gasket kit so the Civic is just sitting in the garage with no head while we work out what to do. Turns out the carbs have never been cleaned either. In happier news I've sourced front headrests. Link to comment Share on other sites More sharing options...
Ghosty Posted December 31, 2018 Author Share Posted December 31, 2018 Man maths in action. New rear tyres are needed for the steels, but at £40-50 a corner before fit and balance, and seemingly no way to get them cheaper (even on 13"s?) I decided on an alternative approach. I've been toying with the idea of some nice subtle wheels for it to chop and change with the steels as I feel - I figured some Watanabes would look nice but I'm not made of money.I discovered the next best thing, in the form of Panasports. Much easier to get hold of, a bit cheaper (though a lot of sets going for £300, unrefurbished and fucked tyres etc) and as good looking. Common fit on MX5s too.I found a refurbished set on eBay with four nearly new Uniroyal RainExperts on them, £320 bin or auction with reserve. Didn't sell, I bid them to £110 and reserve not met..14", the right offset, right width, and the tyres are almost exactly the same diameter as the standard 13"s on the Civic. Couldn't ask for more.Found the same guy on an MX5 sales page and offered him £250 for them, he accepted so I popped off to the Midlands for them, of course the satnav took me past my old uni halls and the Molineux stadiums in Wolverhampton, the one place I vowed I'd never go again after my hellish few months there in 2014.For the price I'd say I did pretty damn well especially compared to the £110 or so two 13" tyres would cost to replace. The Volvo is performing faultlessly and returning good MPG on the run too. LightBulbFun, Shirley Knott, Lacquer Peel and 3 others 6 Link to comment Share on other sites More sharing options...
The Moog Posted December 31, 2018 Share Posted December 31, 2018 Sounds like a good deal. Looking forward to pictures of them on the car v Link to comment Share on other sites More sharing options...
Conrad D. Conelrad Posted December 31, 2018 Share Posted December 31, 2018 It HGFd. ah, fuck man. Link to comment Share on other sites More sharing options...
Shirley Knott Posted January 1, 2019 Share Posted January 1, 2019 Panasports are good lightweight wheels. A few years back (Before kids etc) I spent ages painstakingly refurbishing a rough set and documented the process with my old 'RandomPrecision' handle on MX5Nutz.... https://www.mx5nutz.com/forum/index.php?showtopic=144618 With good tyres on them that sounds like a decent deal you've got! Lacquer Peel and DVee8 2 Link to comment Share on other sites More sharing options...
captain_70s Posted January 1, 2019 Share Posted January 1, 2019 Car HGFs.Buys wheels for car. THAT'S AUTOSHITE. HillmanImp, GrumpiusMaximus, Coprolalia and 12 others 15 Link to comment Share on other sites More sharing options...
GrumpiusMaximus Posted January 1, 2019 Share Posted January 1, 2019 Lady Grumpius lived in Wolverhampton for a bit before she moved in. Ghosty, I really feel for you having to go there again. Ghosty 1 Link to comment Share on other sites More sharing options...
Ghosty Posted January 1, 2019 Author Share Posted January 1, 2019 Tried to fit a rear wheel on the Civic out of interest. Needs smaller wheelnuts but I knew this anyway.A slightly more pressing matter is the fact the centre bores appear to be the same size but don't want to mate up. More investigation required, I suspect the powder coat on the wheels is at least partially to blame.I'm an idiot and I had my centre bore measurements backwards. The Civic one is 2mm larger. File, or something? Link to comment Share on other sites More sharing options...
Ghosty Posted January 1, 2019 Author Share Posted January 1, 2019 Meanwhile, the head is off. It would be on but we were sent the wrong gasket kit (I'm not sure if this is Old Man's fault or what). GrumpiusMaximus 1 Link to comment Share on other sites More sharing options...
Ghosty Posted January 2, 2019 Author Share Posted January 2, 2019 Old Man found a 56mm aerosol cap in the garage, so we used it as a bore template to use a round file on the bores. I then found that the only thing stopping the wheelnuts from going on was a removable plastic collar which I presume was to hold the wheeltrims on to the steels. This just unclipped and with that the front wheels were fitted. There's no space to fit the back ones yet. Link to comment Share on other sites More sharing options...
Ghosty Posted January 2, 2019 Author Share Posted January 2, 2019 Also, I have a 4-2-1 header lying about off the 416. The Civic's is just 4-1. They're a straight swap. Link to comment Share on other sites More sharing options...
Guest Hooli Posted January 2, 2019 Share Posted January 2, 2019 Meanwhile, the head is off. It would be on but we were sent the wrong gasket kit (I'm not sure if this is Old Man's fault or what). How are you holding the car to the roof of the garage? Ghosty 1 Link to comment Share on other sites More sharing options...
Ghosty Posted January 2, 2019 Author Share Posted January 2, 2019 I imported some Australian gravity to make working on the car easier. LightBulbFun and Lacquer Peel 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now