Jump to content

Saab 9-3 OG parts car for sale £250ono


Cord Fourteener

Recommended Posts

My beloved Saab 9-3 OG 2000 2.0t has come to an end.

 

After getting though his MOT and having the advisories taken care of (front suspension ball joints) there was found a monster lurking.

 

Having new shiny lower suspension arms on the front it turns out that the loads on the suspension forced an issue hitherto unnoticed; a crack in the body where the steering rack attaches.

 

This is either engine out and tricky welding or breaking for parts, and I offer Sven the Saab (my 4y/o daughter named him) for sale thus.

 

With a tear in my eye I have to say bye-bye.

 

Please get in touch if you are interested. Cheers

post-26357-0-30903600-1539379342_thumb.jpeg

post-26357-0-92565800-1539379379_thumb.jpg

Link to comment
Share on other sites

If this was a 93NG I'd have been interested in a few bits to prolong the life of mine. I take it there are very few common parts.

 

 

Sad to see one of these bite the dust. I think they look really smart and the interiors are just brilliant. Must be plenty of good spares there for money! Worrying how many things are missed by MOT testers.

These are thoroughly gorgeous cars both in form and function. They are comfortable, quiet, quick and practical and the a/c is on another level. Shame my a/c compressor clutch is worn so it gives up in the heat. Anyway yes it's a major expense and has dashed my ambition to take it to over 200k miles. There are some common parts to the NG, depending on the engine and ECM version. Let me know if you want something, I can split if know what you want.

Link to comment
Share on other sites

I found this online, doesn’t mention having to pull the engine for the fix???

 

Saab admits that all RHD GM900/9-3's are prone to firewall or bulkhead cracks. This is an important saftey issue. Saab Australia is repairing all vehicles at Saab's cost irrespective of where the vehicle has been serviced or the vehicle warranty. Procedure 1. Determine if there is a crack. This will be located around the brake booster and where the rack attaches to the firewall. Check with a mechanic, you can see the crack without the need for hoisting the vehicle. 2. Contact your local Saab dealer for an inspection. My dealer couldnt even see the crack and gave me a hard time. If they do contact your Saab/GM consumer hotline. 3. They will put your vehicle into the system for repairs. There is a 3 month wait for Saab parts in Australia. 4. A panel shop will remove the brake booster, Steering box and steering rack. A Saab repair kit will be welded to the firewall. Repaint. Replace brake booster, steering rack and replace with fresh Saab oil.

Link to comment
Share on other sites

It does, but I guess it saves the bit of fabrication which is the time consuming part of welding.

 

I'd be getting a quote on the welding before I scrapped it, especially if I'd looked after it.

Yes, I'm going to get another quote. The first one I had was over £500. I'm going to get more opinions, and I'll keep the thread up to date of course.

Link to comment
Share on other sites

Yes, I'm going to get another quote. The first one I had was over £500. I'm going to get more opinions, and I'll keep the thread up to date of course.

Where abouts in the country are you? JamSaab in Bristol are supposed to be pretty reasonable. Also Sussex Saab, who sell that adapter plate, are supposed to be cheap too at having the necessary welding done.

Link to comment
Share on other sites

Where abouts in the country are you? JamSaab in Bristol are supposed to be pretty reasonable. Also Sussex Saab, who sell that adapter plate, are supposed to be cheap too at having the necessary welding done.

I'm in North East Wales, my closest Saab specialist is in Wrexham and it's Higher Oaks Garage... I'll be giving them a phone on Monday morning.

Link to comment
Share on other sites

Good man. A mobile welder might also sort that relatively cheaply.

 

You could ask on UKSaabs for thoughts? I think many on there have had this done.

Yes there are several threads. I have had a read through, will see what I can and update the thread as and when I find things out! At first I didn't realise it was a common thing, neither did the garage I took it to, but then they are not Saab experts, but still a very good garage. I don't want to have to give up on it, but we'll see on the outcome. I'll leave the thread up for the time being, but I'll keep it up to date. Thanks to everyone, I think my initial shock has died a bit! I hope I can save my Saab.

 

Still, I have had a good time shopping for cheap (sub-£1000) Jag X-type AWD cars...

Link to comment
Share on other sites

If you want another car that requires welding then get an x-type! ;)

 

In regards to the Saab, TADIS. So much so, there was a recall campaign on them.

Haha yes I see that on the MOT history most of them have corrosion issues. Hmmmm I was only joking this morning how British made cars have a reputation for rotting. Perhaps the designers should have talked more about the weather with their colleges every morning.

Link to comment
Share on other sites

Update: Damage to bulkhead is not repairable without removing engine and gearbox and doing major welding. After speaking with Higher Oaks and JamSaab and getting the same answer, as well as my local garage, the only answer is to either sell as parts or part it out myself.

 

Therefore, Sven my beloved Saab is for sale as such. £250 and he's yours to trailer away or parts for sale.

Link to comment
Share on other sites

Is it a B204 engine that's in this?

 

[squints at Locost with its redtop and omega gearbox]

It's the B205, the black Direct Ignition Cartridge, with the T7 ECM.

 

The ECU has a NoobTune map so it makes 220PS at full throttle and about 360 Nm 3000rpm on the stock components. I occasionally used it like this ;) but mostly used the extra low down grunt for wafting.

Link to comment
Share on other sites

Been doing the maths over the weekend and financially it's out of my reach by the time I've factored in getting it to Sussex and had the repairs done. Being an original model 93 there's not much that could be used on my car to prolong its life.

 

All the best with the sale.

Thanks :) 

Link to comment
Share on other sites

Update: Damage to bulkhead is not repairable without removing engine and gearbox and doing major welding. After speaking with Higher Oaks and JamSaab and getting the same answer, as well as my local garage, the only answer is to either sell as parts or part it out myself.

 

Therefore, Sven my beloved Saab is for sale as such. £250 and he's yours to trailer away or parts for sale.

It seems GM learnt nothing from the mk2 cavalier convertible which was prone to this.

A work mate called Frank fixed his on his drive by taking the engine out and welding it up.

 

I know it's money and or time but what is stopping you or anyone else doing that?

 

It seems to me that would be a great long by term investment for someone.

 

Not me obviously.

Link to comment
Share on other sites

It seems GM learnt nothing from the mk2 cavalier convertible which was prone to this.

A work mate called Frank fixed his on his drive by taking the engine out and welding it up.

I know it's money and or time but what is stopping you or anyone else doing that?

It seems to me that would be a great long by term investment for someone.

Not me obviously.

It is an utter bargain but sadly I think beyond what a lot of home mechanics would take on these days. I wouldn’t bat an eye lid at whipping an engine out of a mk2 Cav but this would make me nervous. Stupid really as I am sure it’s just a bit more complex but as long as you are methodical it can’t be that hard can it? Will be a great car for someone.
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...