Jump to content
PhilA

1951 Pontiac Chieftain - Gearbox and wiring

Recommended Posts

Thanks for all the kind remarks. The pictures flatter it, honestly!

 

The scene calls for 2 doors, but in this case the difference in shape is negligible. Plus, the two door versions don't get rear quarterlight windows.

 

Honestly, from pictures the block in this looks similar to Packard's engine. It may be the same, it can find its roots back in the thirties. For the age, it's a fairly advanced design, all bearing surfaces are pressure fed with oil, the weak points are the conrods if you over-rev it. Cast iron pistons, coated with tin see this to being a low-revving but torque-laden lump.

 

Busman: $5300, or by today's exchange rate £4074.

 

I believe this to be the original color scheme. I quite like the sky blue, so it's going to hang around.

 

Phil

Share this post


Link to post
Share on other sites

That is very lovely.  I love American cars and have a 30 plus fleet in 1:43 scale!

 

Remember my wee daughter being engrossed by an early 50s Packard at Northampton about ten years ago.  Might have been a '51?

 

post-117-0-08838800-1535567448_thumb.jpg

 

Has it been lowered?  Looks quite low to the ground

 

 

Share this post


Link to post
Share on other sites

That's a '52 or newer with that gearshift. Very similar inside though!

 

It's sitting at standard ride height as far as I can tell. The wheels are tucked down deep into the arches and the front overhang gives an impression of being lower than it is.

 

Phil

Share this post


Link to post
Share on other sites

Are we going to see your Fuelly Sig change to the Chieftain and single figures Phil?

Book is 12 city, 19-25 highway.

 

Research on comments on Pontiac internet fora suggests 15-18 MPG is realistic for everyday pottering (so in the low 20's UK MPG).

 

Considering it's 6.5:1 compression, it will probably run on anything and return about the same economy figures.

 

Phil

Share this post


Link to post
Share on other sites

5300 dollars for that beauty or 4995 for that pile of crap next to it in the first picture. I'd have done the same.

But, that's down from $12,995.

 

A stack of paper with Benjamin Franklin on each one spoke out to the guy, who in all fairness was most excellent and wonderful to deal with.

 

Phil

Share this post


Link to post
Share on other sites

Excellent, I can totally see the appeal behind this. Sad to hear the Renault go but it sounds like domestic bliss will be restored with your new car, which is not an element to be underestimated. 

 

That's also quite a discount you got there! Looking forward to more photos and project progression. Imagine not having to deal with American-French bits anymore!

Share this post


Link to post
Share on other sites

That is very lovely.  I love American cars and have a 30 plus fleet in 1:43 scale!

 

Remember my wee daughter being engrossed by an early 50s Packard at Northampton about ten years ago.  Might have been a '51?

 

attachicon.gifR0011770a.jpg

 

Has it been lowered?  Looks quite low to the ground

I think that is a Pontiac. Amazingly the more expensive Packards were much plainer inside.

Share this post


Link to post
Share on other sites

I think that is a Pontiac. Amazingly the more expensive Packards were much plainer inside.

You are right. Zoomed in on a big screen you can clearly see the Chieftain head and the word PONTIAC on the center of the steering wheel...

Share this post


Link to post
Share on other sites

Ace, nice find. Were you particularly looking for one of these, or just looking to spend some money?

Well, that's an interesting question. What began the ball rolling was actually the wife. Understand that she has an innate hatred for the styling of the Renault, so when her Facebook feed showed up a '65 Pontiac Catalina for sale locally for a very good price, she showed me and said that It Was A Car That She Did Not Mind The Look Of.

Circumstances however caused someone else to buy it before I could. Therefore, I did what any sane person would; I had a quiet sulk and started looking at cars on Craiglist. There was very little in my interest range on the New Orleans subsection so I broadened my search to center on Baton Rouge. Up pops this in the search, already reduced to $8k after 24 days of having been posted.

It was shown to the wife. She agreed that indeed, it was a fine looking automobile (Yeah, that one is okay).

To stop me nagging about it she agreed to take the road trip to go view it. Once I was certain it was not a complete basket case, that was it. It had to be mine. Ever since I got to drive a 1947 Humber Super Snipe about 20 years ago this era of vehicle had been etched into my mind. The price was reduced, reduced again.. a call was placed and the age-old question "What's your best price if I bring cash today?" was asked.

 

The rest is in this thread.

 

Phil

Share this post


Link to post
Share on other sites

All kinds of cool - I'd pay more than that just to have it sit outside my place and drool on it at regular intervals........ I know it's a cliche - but they really did do it with more style back 'in the day' didn't they.... I like the looks of some modern stuff too - but it just doesn't compete with the whole package. 

That thing gives me wood - even just looking at the photo's on here...... WOW

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By dozeydustman
      Just about an hour ago I went to start my car up, had Mrs Dustman with me, to go and pick Miss Dustman up from work. Turned over fine but took a while to fire up.
       
      Steering felt heavy. Thought maybe as it's currently -5 + wind chill it's just cold & the fluid is thick.
       
      Started reversing out my bay then I was greeted with:
      "DING DONG" - ABS fault.
      "DING DONG" - ESP fault
      "DING DONG" - headlamp auto levelling not working, contact service.
       
      I shut the car down straight away and we went in Mrs D's Corolla.
       
      Alternator is less than 2 months old, it's a recon unit from Alternator Man in Portsmouth. Hoping the cold isn't killing the battery and it's taking the 'nator out with it (battery passed the drop test last time the no-charge warning came up). Looks like a session with the multimeter after work tomorrow.....
       
      MEH.
    • By dozeydustman
      Mrs Dustman has a dash cam she wants me to fit to her '99 frog face Corolla. It came with a hard wire kit as opposed to the usual fag lighter lead, so I might as well make a decent* job of it and hide the wiring completely. Trouble is I can't remember how I got the radio pod out when I fitted the DAB unit she now has. I've also got a few dash illumination bulbs to change so I might as well do it all in one hit while it's a sunny afternoon.
       
      A bit of googling comes up with the US spec dash which appears to be different from the European model, or the 2002-on model. I seem to remember spudging out the dash vents to access some bolts/rivets.
       
      Failing that, is there an easier place to get a switched live from (besides the radio) that doesn't involve destroying the car's interior?
    • By 1970mgb
      So, someone posted on another thread a link to an Ebay listing for an LHD '74 Marina listed on Ebay.
      I called a little while ago and talked to the seller, and the story is that it was a good running and driving car 10 years ago, but has been neglected and won't run. I'm debating with myself about whether or not I want to take it on as a project.
      I know these had a terrible reputation when new, but at the same time they're actually legitimately rare in the US. I have seen one in person, and most of the estimates I've seen put the number of survivors at 10-20(although I don't know how much we can trust that).
      There's some definite appeal in the engine familiarity for me with the MGB. I MIGHT have to convert it to a manual though. In addition, there's the issue of having it shipped a couple hundred miles to me. It's listed now for $700...if I could do $500 it might be a make or break for me.
      Any thoughts here on it?
       
      EDIT: The car as it sits now is an automatic. If I swapped the transmission, it would be to a manual. Sorry for any confusion from my incorrect statement!
    • By blackboilersuit
      After many a long year of occasional contribution on here I've probably got enough old shite on fleet now to do something I should have done yonks ago and start a project thread.
      The story so far.........
      I had an 02 CRV for 6 years and it performed faultlessly as an car taking everything in it's stride. The only issue with it was the 25mpg it returned but as I worked close to home that wasn't an issue. Cue December last year and a new job saw my commute go up from 4 miles a day to 32 miles a day.

      By March I was drowning in green shield stamps so  bought the mighty diesel disAstra from Davehedgehog of this here parish. Shown here on the only off-road parking and only second car parking space I have. The garage contains a few motorbikes so I've always stubbornly stuck to a single car rule so I don't have to move motors to get bikes in and out. More on this detail in a bit.....

      A combination of broken motorcycles needing worked on, a bike trip around the Baltic and work meant that I soon realised that I had no time to prep the disAstra for its MOT  at the start of this month. It wasn't worth enough to pay to have the work done so I decided that the poor old thing would be scrapped in favour of a replacement motor.........
      The mighty Volvo (V70 D5) was purchased from Ma & Pa forddeliveryboy of this parish and migrated north of the border back to it's natural home.

      Three days after being pressed into commuting service the mighty volvo suffered a (badly) sticking caliper and much burning brake smells that had to be stripped and rebuilt before work the next day. Sticking piston at that so the whole thing was off and the brakes had to be bled afterwards. Two and a half hours in the pissing rain was a bit character building especially as the still MOT'd (by 3 days) and taxed (but not insured) astra was sitting on the drive. Decision made, insurance checked and a soon to be taken out Admiral multi-car policy will see me with two cars on the fleet again. I could have used one of the bikes but motorway commuting in the pissing rain on two wheels is no fun. The volvo needs an MOT in december so having the astra back on the road will take the pressure off getting that done if it needs work and the weather is bad.
      And so as the volvo continues to provide daily service, project astra revival starts. Known MOT work needed is frilly arches,  broken number plate and front discs and pads so nothing major. Thus far the arches have been sorted without resort to duct tape.
      After a bit of prodding.......

      And after the angle grinder was let loose surprisingly it was only the return lip that was rotten so the welder was broken out to lash on some roughly cut fresh metal.

      Linished off filled, sanded and primed. Note the use of a farmfoods brochure pulled out the bin being used as masking paper for extra shite points.

      Followed by a near perfect colour matched (*) top coat....

      Well I had black on the shelf and it's good enough to stop the primer soaking up the water so that'll do for now.
      Hoping to get brakes and MOT sorted in the coming week so more to follow soon (hopefully).
×
×
  • Create New...