Jump to content
Squire_Dawson

Humber Super Snipe: overhaul.

Recommended Posts

We are hungry and our attempts to fix this have been foiled by THE SOUTH.

 

Highlights include failing to get into TWO McDonald's, the first because a super confusing road layout threw us back into the dual carriageway, and the second was surrounded by fencing and JCBs. Presumably they were mining for McNuggets.

 

Roadside greasy spoons are worryingly sparce.

Share this post


Link to post
Share on other sites

I delayed us slightly by demanding stop at a crowded service station to use the facilities rather than peeing out of the window of a moving car.

 

But finally, a worthwhile spot:

 

51cd30aebd4430cff1a1517dffdeaabb.jpg

 

 

 

That looks horribly like the A43 M40 services at Cherwell Valley. 

Share this post


Link to post
Share on other sites

Is that a horseshoe lapel badge you are sporting? If so, Mrs P would be lamenting the bad luck you are about to encounter  -  the shoe should be the other way up as otherwise, all the good luck will run out ...  I know, I know.  She'll probably sell you some lucky heather too, if you ask nicely.

Share this post


Link to post
Share on other sites

But 4 x 6w cassette to me says 70-80s

More or less identical unit to the one in the 21 I had. The original one in the 11 is very much more antiquated looking.

25 auto in my opinion but it doesn't fit either bench seat or gearstick placement.

It could just be a Renault radio in something else of course.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By strangeangel
      I thought I'd start a thread for this as I'll probably end up asking all sorts of questions, given that this is my first 'proper' Citroën.
       
      So... the ground clearance lever won't go all the way to the highest setting (all others work), which is bad 'cos the book says I need it to do that in order to check the LHM level. It feels like something's seized, so I don't want to force it. Any ideas for a plan of attack would be much appreciated.
       
      Next up are the wheels. I now have a set of 205 pepperpots that have just gone off for powder coating & I need to get some tyres for them. The handbook says the car should have 165/70R14s on, the wheels came with 185/65R14 on. Any thoughts about what size I should get please? Cheers.
       
    • By PhilA
      Well, here we go again. I bit the bullet and bought me this.
       

       

       
      It's still up at the lot right now, there will be a miniature Collection Thread embedded in this thread when I go fetch it. Hopefully if the weather's good, that'll be this weekend.
       
      So, what is it?
       
      As the title suggests, it's a 1951 Pontiac Chieftain.
      It's got a flat-head straight eight hiding in the engine bay, 4.4 litres of it. It's bolted to a 4-speed Hydra-Matic Drive gearbox. No torque converter on this one, just a fluid coupling. 116 horses at a screaming 3700 RPM, 240lb/ft at 2000. It idles at 375 RPM. Redline just shy of 4k.
      Did I mention it's quite big? Sixteen foot eight from end to end and it seats six people in comfort. Every door has a quarter-light, too. Comfort is provided by properly sized tyres and (quite surprisingly for the age of it) double independent wishbone front suspension. Steering is via worm/wheel steering box so is moderately direct and the brakes are hydraulic drums all round. Modern and scientific!
       
      It's an honest example; looks to have had a "restoration" about 15-20 years back and the rust is coming through the seams and filler. The bottoms of the door skins have gone, the bottom of the A-pillars have gone (the front doors, on a single hinge a piece still open and close with one finger!) And it's got a couple holes and blebs in all the places you would expect.
      Not much electrical works. It needs to be completely rewired because someone has "converted" it to 12V. Thankfully it was originally negative ground so that's a good start. Gauges and such can be driven from a 6V bucking converter.
      Engine has had some work done on it- starts and runs nicely with very little greb coming out of the exhaust. It's got a few gaskets that need replacing and the tappets need some major adjustment, the gearbox engages gears correctly, the steering is okay but has a lot of slack in the center and the brakes work well, dont sink or feel spongy but need adjustment.
       
      More to come. I'll post up more pictures when I get it home.
       
       
      --Phil
    • By snagglepuss
      Didn't bother to do a collection thread as was a 30min drive so fairly boring.
       
      Yesterday I won this
       

       
      Which is effectively going to replace the civic and the xantia.
       

       
      Picked car from a bodywork guy in foreign lands (Yorkshire).
       
      First thoughts are that I think it has been sitting for a while but started straight up. Apart from service bits and potentially a cambelt everything seems to be good with it. Comes pre dented.
       
      Current is differently abled tax so that will need to be changed.
       
      Windscreen has small crack in passenger side.
       
      Runs really cold, this is after 30 miles of motorway

       
      Mind you it honks. Properly honks. Not as much as the focus I got from Shadow but not far off.
       

       
      List of jobs
       
      Oil change
      Spark plugs
      Air filter
      Thermostat
      Rear boot struts
      Front discs and pads
      Cam belt plus bits
      Ball joints
      Drop links
      Rear anti roll bar bushes
      Stereo code
      Windscreen crack
      Swimming pool emptied from boot wheel well
      Seal rear light clusters
       
      And a big does of cleaning
×
×
  • Create New...