Jump to content

Shirley Knott's Evil Web Of Shite- V70 Handbrake Shoes And C1 Exhaust


Recommended Posts

16 minutes ago, bezzabsa said:

I'm sorry but there's way to much servicing, and Name brand parts ? !!!! being used on here....Very Un AS like...

You're right, bad form on my part.

I'm essentially the equivalent of one of those psychotic women that are attracted to wrongun's because they  think  they can 'change' them, only for me its with cars.  This lot get MANN and they probably deserve Crossland TBH.

24 minutes ago, bezzabsa said:

nice Volvo though 

Thanks, it's a definite ten footer though!

Link to post
Share on other sites
On 11/16/2019 at 9:15 PM, Shirley Knott said:

It's been more than a month since I posted here, mostly because there's not been a huge amount going on car wise and also on the basis that I've been deeply busy if not almost entirely consumed by renovating our house, that's not to say that nothing at all has happened though.... A few weeks back a V70 of exactly the same ilk turned up in a local breakers yard...

 

49074704913_2e46e3c8ed_k.jpg

 

It's a perfect match. Same year (Y reg), and the same engine (2.5 140PS). Identical even down to the fact that it's manual. This is relevant because I wanted to liberate the often troublesome ETM from it as a spare get out of jail free card should mine ever go wrong, and whilst they're supposed to need coding to the car, anecdotal evidence suggests that if you pick the exact same model/year it often isn't necessary.

One cleaned ETM ready to be wrapped up and go into dry storage in the loft...

 

49074703213_b6113b1210_k.jpg

 

Meanwhile, I'd managed to narrow down the engine warning message I'd been getting to a faulty clutch position sensor, it lives here under the clutch pedal (Obviously)...

 

49075463562_7437da0490_k.jpg

 

Needless to say the sensor from the breaker V70 was taken, and having tested the resistances with a multimeter was proven to be a gudun...

 

49075254756_fd88fa8bf9_k.jpg

 

Success! No codes, dire engine failure messages gone and as an added bonus now the cruise control now works too.

 

49074724113_88b89a47f5_k.jpg

 

This means the Volvo is pretty much running as it should, good news as it's very much been earning it's keep during our aforementioned house renovations. To be honest it's been a godsend, I'm about 2000 miles deep now with no major dramas and it's actually really liberating to have a car that's already a bit battered around the edges! There's no way I'd have subjected my old 940 to this kind of carry on...

 

49075377051_cf965e8d22_k.jpg

 

I see you've thrown you hat in

Link to post
Share on other sites
6 minutes ago, Isaac Hunt said:

I see you've thrown you hat in

Both literally in that instance and also metaphorically in the sense that there will be no more home improvements until at least 2025,.

Renovation work on  a 1950's house makes maintaining old cars seem like a walk in the park.

Link to post
Share on other sites
  • 3 weeks later...

The V70 showed a dash warning last week RE low beam being inop. Surprise surprise as Cilla used to say, the H7 connector was basically non-existent, what little there was left of it turned into wensleydale the moment it was touched leaving just the spades. Nice to see this trend RE fragile plastic was carried on from the old RWD redblock stuff, at least I know it's a 'proper' Volvo...

 

49473469863_9d3687dc47_k.jpg

 

Wires stripped...

 

49474176757_bf7737904b_k.jpg

 

£2.99 Ebay ceramic H7 holder ready to be spliced in, this should be much tougher...

 

49473469943_e6d884ded6_k.jpg

 

And success...

 

49473469648_c47d566d2f_k.jpg

 

49473956531_9b57e3a0ab_k.jpg

 

As a reward for complying with a cheap repair I rewarded it with a new £16 "Delux" velour carpet (Ebay again!) for the boot area on the basis the existing carpet/panels are badly worn and let it down. The breakers want circa £50 for hatch floor panels, on a £350 car- fuck that for a game of soldiers.

For £16 it doesn't look bad...

 

49473479698_9c2e793da7_k.jpg


49473481698_7e4023f8ca_k.jpg

 

I'm about 3000 miles deep into the car now, it's just clocked over 92K and I'm still waiting to find out what I'd missed/why it was so cheap. I'm sure there's something lurking that I haven't spotted yet...

 

 

 

 

Link to post
Share on other sites
7 minutes ago, Broadsword said:

This Volvo really has been a triumph in good, sound bangernomics!

Thanks chap,

I'd love to say I'd chosen it carefully (I do with most of my cars) but it would be a lie. Literally everything about it screamed walk away.

It turned up on Gumtree for £395, I had the money from the 940 I'd just sold burning a hole in my pocket and called within 20 minutes of the advert going up, The seller when asked how long he'd owned the car came up with a long story describing how he'd owned it before and bought it back from a friend (Thus not answering the question at all). When I got there it was on a dive estate in Sunderland, he was wearing a high-vis jacket with 'Noddy's Recovery' printed on the back.  He had literally five kids under 10 running round his front garden all of whom called him dad. There was no V5, He let me drive the car around the block, I bid him £350 which was accepted and the rest is history.

Interestingly the chap I bought it from swore blind he'd do the transfer of the V5 online and after a month without receiving it (Shock) I called the DVLA in Swansea who confirmed the online transfer had been done online as the seller suggested but there system had been upset by the fact the 'gentleman' had bought it and changed ownership to his name online 2 hours before selling it to me and swapping ownership into my name, ergo they thought it was an error and didn't post it.

It's HPI clear, drives well and doesn't overheat or really misbehave in any way. I can't really believe my luck but I was probably a bit daft buying it given the circumstances.

Link to post
Share on other sites

Right, today was MOT day for the C1, imagine my joy yesterday when this light showed up again...

 

49502680932_39de5fa04e_k.jpg

 

A quick scan showed there's nothing actually wrong with the airbag system. My suspicions were that there's either a loose connection somewhere or perhaps a dying battery was to blame (The car's been struggling to start of late) . Yesterday afternoon a replacement battery was procured locally and I was out with the larks this morning ready to fit the battery and clear the code in time for test....

 

49502679167_b2edd35984_k.jpg

 

Old battery looks old...

 

49502679362_fff7922180_k.jpg

 

Pretty much all of the nuts and bolts on this C1 shear as soon as you look at them, I've never know another car like it. It's worse than MX5's for rusty fasteners, that's quite an achievement. The bolt that holds the battery clamp down avoided this fate with the use of copious amounts of Plusgas and working in a turn and then out a turn until it came free.

It got a generous dose of copperslip before it went back in, as Luther Vandross used to say, never too much, never to much etc etc...

 

49501951478_d9420df436_k.jpg

 

After that the new battery went in and received the vaseline 'treatment' on the terminals to inhibit corrosion. Mmmm, soothing...

 

49502678872_a67fd0a126_k.jpg

 

Never too much, never too much, never too much, wait... That might actually be too much....

 

49501953638_b90b6d5e66_k.jpg

 

After this the code was cleared and the car was taken for test achieving a clean sheet (Better than the V70 or the Golf managed) so all was well. The light hasn't returned but I'll be keeping an eye on it and at least I have the technology to read/clear it should it rear it's ugly head again.

Link to post
Share on other sites
  • 1 month later...

This morning out of sheer boredom I changed the timing belt on the V70.

Old belt looks old...

 

49708038707_6b04e92eee_k.jpg

 

No turning back now...

 

49707185158_b39e24e69b_k.jpg

 

Old belt vs new...

 

49708038332_a36c214606_k.jpg

 

New serpentine belt ready too...

 

49707717516_4203bee912_k.jpg

 

And all done...

 

49707717631_545a2d701a_k.jpg

 

Unbelievably it all works!

I was pretty daunted by this job as it's only the second timing belt I've done and the first on an interference engine with twin cams. Either way, the car runs well with no warning messages. The knowledge that it now boasts a new Gates timing belt kit and serp belt brings me a great deal of comfort and as a result I'll now have the confidence to take it out on longer journeys if/when this whole mess is over.

 

 

Link to post
Share on other sites
  • 2 weeks later...

A week on since the timing belt change on the Volvo, only 30 miles covered because lockdown but nothing has blown up yet! Buoyed by this success I got stuck in this afternoon and serviced the little C1 and the Golf.

C1 up first...

 

49739544302_10a60e84d5_k.jpg

 

Air filter was examined but having only covered about 4000 miles was found to be like new and was put back in, the replacement can go in the parts bin until next year...

 

49739544167_b77d61ab5e_k.jpg

 

Oil filter access is nice and easy on these...

 

49739219911_2b747a31b5_k.jpg

 

After this brakes/bushes/boots etc were all inspected with no issues found, hinges greased etc then it was time to move on to the Golf....

 

49739543727_26907bcfa0_k.jpg

 

This one now has over 150k on the clocks but wears it pretty well. It genuinely feels like it would do the same again without much drama. Oil filter access is even better than the C1, it also allows access for the Pela to drain the oil cooler, actually getting more out than a traditional sump plug drain...

 

49739219821_f2dac8eefe_k.jpg

 

Again, Mann oil filters and massively over spec PD oil despite the cars lowly SDI status, because I care...

 

49739543842_049c401a51_k.jpg

 

Again, after this brakes/bushes/boots etc were checked, there's a CV boot that wants changing but other than that all good. Air filter and fuel filter were changed last April and have only covered around 5000 miles since then so will be fine until next year. The cars won't be moving much in the coming days/weeks/months but all in all it feels good to know they've had a once over.

 

 

 

Link to post
Share on other sites

As the covid lockdown continues and boredom/insanity creeps in I've been keeping myself busy by tearing into the ropey V70. The car is now where I'd like it to be mechanically having had the brakes overhauled, clutch position sensor replaced, a thorough clean out, a full service and a new timing belt kit fitted. It's now time to turn attention to the car's cosmetic woes.

One of the things that really pulls the car down is the wheels, they're shocking. See below for evidence...

 

49761823141_6e04a6a23d_k.jpg

 

49761292178_006625d9df_k.jpg

 

49762151807_0d7d452f0b_k.jpg

 

Yup, pretty bad eh? The whole premise behind the Volvo is to make a decent car out of it on a small budget. Given the car cost £350 to buy, spending £200 on having the wheels blasted and powder coated would be counter intuitive. A rough and ready DIY approach is the way forward here and today I decided to take action!

Wire wheels on a drill and some manual sanding got me here...

 

49761825906_db92ee1a51_k.jpg

 

Then the wheels were wiped over, masked up and given a blow over with some etch primer I had knocking about in the shed...

 

49762154662_13700cbbc1_k.jpg

 

Followed by several coats of 'Auto Extreme' silver wheel paint- 6 cans of this stuff cost me £12.99 from Ebay. I bought it mostly because it's cheap, but also because it claims not to require lacquer on the basis of having a natural satin finish. It actually went on quite well...

 

49762154537_d0da58b1a9_k.jpg

 

And an example of one finished with masking removed...

 

49761825281_b95dbdc134_k.jpg

 

Not perfect but not a bad result either (I really could have done with spending more time sanding) This car's never going to be a show pony, getting things to a standard that's presentable/not an eyesore is the end game really. Wheels back on and looking smarter considering the total cost of this exercise was £13...

 

49761825126_40b3f73d26_k.jpg

 

Next steps are probably working the neglected paint with compound to remove as many scratches/swirls as possible and then potentially getting in touch with a paintless dent removal chap to work some magic on the bruised and battered panels.

Link to post
Share on other sites
  • 3 months later...

Back after four months of radio silence with an un-remarkable update about fitting new brakes to the Golf over the weekend.

First rate tools assembled, and also Comline discs and pads for a bargain price of £40 delivered from Ebay! They're actually made in the UK and are decent quality IME, every bit as good as the Pagid set that ECP wanted £85 for... I fitted a set of their (Comline's) brakes to my brother's Corsa last year as an experiment- He's still alive and the brakes still work well and look good,  Comline braking equipment is now officially Shirley Knot approved.

 

50190028652_df2cd7edba_k.jpg

 

Up in the air and wheels off, looks like that brake change wasn't a minute too soon...

 

50189768791_8d425d5d56_k.jpg

 

All back together in a jiffy...

 

50189767871_1b51d3b67f_k.jpg

 

I've got a bit of a fetish for new brake hardwear visible through an alloy (I should see/talk to someone about that) Also, behold what is perhaps one of the only Mk4 Golf's left in Britain without rusty front wings...

 

50190025892_49f35aed7a_k.jpg

 

All in all that's been it. No new cars and all of the existing fleet are pretty much plodding on and causing very little bother.

 

Link to post
Share on other sites
  • 2 months later...

Another brief update to show what's been going down at Cassa Knott..

The V70 got an oil change...

 

100_0179

 

And then new handbrake shoes, it didn't need them but they're known for shitting themselves and destroying the hub if left to get dry/crumbly- I think these were original and likely 20 years old...

 

100_0184

 

Mintex shoes and even a new fitting kit because I care...

 

100_0185

 

Meanwhile Mrs Knot came home in her C1 complaining that it was noisy. A brief inspection showed the rear section of the silencer to be utterly fucked....

 

100_0189

 

I was recently waxing lyrical to DanTheCapriMan that fitting exhausts was something I would no longer do on my drive... As I called round local garages it became clear that I'd be waiting over a week to pay someone else £100 or so to fit a new one, this I believe is what is known as 'Hubris'.

Up on the ramps she went...

 

100_0191

 

And old vs new (Klarius- because I don't care)...

 

 

100_0188

 

All in all the new exhaust section took about 25 minutes to fit and cost £30, I'm actually pretty pleased I didn't pay someone else to do it TBH.

 

 

Link to post
Share on other sites
  • Shirley Knott changed the title to Shirley Knott's Evil Web Of Shite- V70 Handbrake Shoes And C1 Exhaust

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By davehedgehog31
      I've had various threads on the go for different collections this year, but thought I'd condense my threads into one manageable thread to document my ham-fisted tinkering.

      At the turn of the year I was driving a nice, dependable, modern 2011 Peugeot 407 and no other vehicle. It was nice enough, but boring as feck. I'd bought it after a series of disastrous heaps in the awkward age bracket of being new and valuable enough to worry about but old enough to be fucked. The 407 was just too new, too bloated and dull. I had a hankering for old metal, my Mineral Oil withdrawal pangs were strong.

      From January I started looking, there were eBay bids, missed reserves, wasted trips from Gumtree and other such nonsense. I happened on an automatic Rover 216 GSI with one giffer owner from a year old. The chap was giving up driving at 93 years old and his grandson was moving it on. I bid, and failed. It was in London though, about 420 miles away so I wasn't all that bothered. Of course when he offered it to me for my losing bid after the winning buyer was a no show I said yes. I was on the Megabus down to that London overnight for about £15. I hung about in Liverpool Street station like a mad shivering jakey until my train out to the suburb for my first sight of the new steed. It was battered outside but had been well looked after. A frankly insulting amount of cash changed hands and I was away up the road.

      We had many adventures together, it was dependable and it whet my appetite for interesting old motors again and proved that the very bottom end of the market was navigable if I had the patience to wade through the sea of shit to find the odd pearl.



      The 407 was still on the fleet at this point but I was covering a lot of miles in the Rover, with a long commute though the fuel economy wasn't ideal. When a friend's mother was looking for a new diesel saloon to replace the faithful old Xsara she had a scheme was concocted. I sold the 407 to her and was on the hunt for an interesting replacement.

      When I was growing up my dad had a succession of hopeless shitters, indeed I was brought home from the hospital as a newborn in a brush painted Skoda Super Estelle. The best car he had was a red XUD Peugeot 405 with air conditioning and electric windows. So when I found a 1994 GTXD advertised by someone who could actually compose a car advert in the fashion you would expect of a human being educated to a Primary School level, I pounced.

      Of course I couldn't buy a car just down the road so it was on the train to Birmingham. First class no less. I stayed in an absolute flea pit of a hotel and drove up the road the next day. This was a proper bit of nostalgia and a really practical borderline classic car. It had been fastidiously maintained by the previous owner. Apart from there being a hole where there was once a stereo and the lack of working air con it was a pleasant drive home.

      Given their relative scarcity and how dependable this one has proven so far, it's a keeper, I'd struggle to part with it.



      Two cars just wasn't enough to worry about, so this Citroen C1 was acquired. Pure Aleppo spec. A camel can go for weeks, or months without stopping at a watering hole, the C1 has a similar thirst for Motor Spirit. Man maths were employed and worked out that it would easily* pay for itself.




      There have been further movements, I'll recap them shortly. I should probably do some work.
    • By Fumbler
      To mark the genesis of my fleet project thread I here present my new car: a 1997 Nissan Micra Shape-


      It really looks that good. There is a reason for this: its previous owner was an old lady who loved the thing so much so she made every effort to keep it in good shape. It originally came from Fleet in the GU postcode which suggests to me it was bought by the present dealer at auction, hence arriving down here in Kent. Before seeing the car I checked its MOT history and its only fails were thanks to broken stoplights, which shows me that it was very well cared for. I suppose an example of this was that on the last MOT, an advisory was a corroded rear silencer. The silencer on the car when I saw it was new. Methinks the lady wanted to keep it as good as possible. It was kept in a garage and so all the bumpers and black trim are very black and the tyres are in very good condition. Spare never used! Also included a free Dettol first aid kit from 1997.
      This car has 15000 genuine miles on the clock. We clocked over 15000 during the test drive! The lady owner really only trundled around her village in it and the MOT shows that it only did some meagre miles between tests. This, of course, came at a price. We saw a cherry red Micra from 2002 at the same dealer. Paint was shoddy and when they washed it the boot had massive sections of bare metal and it wasn't very happy. This car, however, is in fabulous condition and there was no contest between the two cars- it really is that good, inside and out. Immaculate interior, driver's airbag, cassette player... all there and all functioning (apart from cassette thanks to new battery and failed display). This meant that I bought it for £1600, £100 over what was my uppermost limit, but I knew I wouldn't see another like this that was in as good shape for a fair while. It was priced very ambitiously, at £1990, so I'm content in the fact I managed to slash a few hundred off the price. There wasn't that much paperwork though. All the dealership received was the logbook with 3 service stamps from 1998, 1999 and 2000, the radio key pass, a National Trust sticker, and the original paperwork holder. I suspect the old lady died and had her car auctioned, and the massive file of paperwork is now someone's egg carton, along will everything else she owned.

      As always, this car isn't exactly in showroom condition. While the inside is great and the floor is solid, and the underseal is in great shape, the not undersealed parts need a small looking at. Mainly the rear of the driver's side sill. It's really the only bubbling on the car. I suspect a well aimed stonechip managed to fester over the wintery salted roads, making it rust even more. It's around the size of a 5p piece, and will give me the opportunity to spray the insides of the sill with some chain oil to prevent any further corrosion. Behind the fuel tank there are a few rusty joints- places where the spraygun cannot get paint onto- which some Vactan and Dynax should put to rights. Alternator belt looks original because of the cracking and Nissan badges and will need doing soon as well as the front plate. As much as I like the 90's font and original dealer surround, the dishevelled R and general water ingress is a persistant MOT advisory. It could be the MOT station being strict (and most likely is considering there's a Saxo down the road with far worse blackening), however for the sake of peace of mind and all that, I'll get a new one made. The rear has already been replaced indicating this has happened before.
      All in all, I think this is a nice plucky motor. I'll have it by the end of the week; just got to sort out tax, insurance, and it's going to have an MOT. As part of the deal it's getting the MOT and an oil and filter change which will be something ticked off the list. It has some love scratches and chips here and there, but it drives well, is stiff and controllable, and should make out to be a nice summer project!
    • By vulgalour
      As tradition dictates, an thread.
       
      It all kicked off here: http://autoshite.com/topic/34152-citroen-bx-17rd-for-sale-sale-on-hold-as-its-done-a-citroen-the-little-bastard/
       
      Lorry is booked for collection tomorrow and a 340ish mile round trip awaits.  It will be a long, but rewarding, day.  No live collection updates because I live in the olden times and even if I didn't, I'm not sure I could be entirely arsed.
       

       
      I am looking forward to meeting Dean-numbers, his collection of wobbly French cars and, of course, Bleriot the BX.  It will probably be too dark to do anything when we get back on Friday so I suspect Saturday I'll be up bright and early to get stuck in and see just what I've let myself in for.
    • By L fallax
      I’ve been considering making a topic for progress with my Felicia for a little while, I want to reflect on what’s been done in a more organised fashion compared to flicking through photos on my phone. 
      I’ve had a keen interest on older generation Skoda for quite some time (100series-Facelift Felicia), I bought this 1999 T reg Skoda Felicia mid April. Would of loved to buy the pre-facelift model but sadly most seem to have been scrapped, however mine does come with the 1.3 OHV engine -the same used in Rapid 136’s, albeit slightly modernised and with Siemens multi point  fuel injection producing a whopping 68bhp.  
       

      First pic after a wash. Missing headlight trim, dinged rear OS door, NS fender is a bit bashed in as the original owner must of had a bit of a bash, the whole bumper sits a little lopsided. Hopefully can get the bodywork pulled at some point.

       
      This is my first car that I’ve bought with my own money, so naturally wanted to put in the effort to get her running smoothly with some maintenance: new oil & filter, air filter, coolant flush, wipers, bulbs, spark plugs, valve cover gasket etc.
        
      Engine bay needed multiple washes to clean up, looked a right bombsite when I bought it, some neglect was evident from past owner!
      Three and a half months later and my Felly is now road legal (due to issues with DVLA and V62), what a jolly little car to drive though! The exhaust blows like a wet fart when you press the accelerator but it’s very comical. (Obviously will fix this when I’ve the money, haha.) 

       Driving around aimlessly I’ve covered around 160 miles in a couple of days.  I decided to drain the gearbox and refreshed it with some 75W90 SS Gl4, after a few embarrasing car park CRUNCHES into reverse gear enough was enough, definitely was well overdue a change and now it’s silky smooth. 

      Blue Lagoon Metallic is the colour for anyone wondering.
      (Removed the faded Skoda badge and sprayed the 3D Favorit badge and grill black - perhaps not to everyone’s taste but it’s my car ?)
      Next to do is fit new brake discs & yellowstuff pads which have been sat in the boot for a couple months, need to file the edge of the pads down a tad and find a way to remove the locking pin screw from the disc- I can’t seem to get them to turn using an impact screwdriver but perhaps I just need to hit harder!
      The goal is to fit a few unnecessary modifications,  just some stiffer lowering springs and alloy wheels with good tyres. Nothing too crazy. The ride is pretty good, very little body roll, the strut brace seems to work well. A very throwable and responsive supermini, town and rural road driving is an awful lot of fun. 
      If anyone has some Favorit "Skoda" mudflaps let me know as I really would like to replace the ones that are fitted!
      Updates to come.
      All welcome to share thoughts and stories alike ? 
       
    • By Peter C
      Woke up this morning, had a little time before I had to leave the house for work, had a quick look at what’s new for sale on Retro Rides and saw an ad for a W124 200E manual, located 15 miles from home. I had no intention of buying a car today but I had to have it! I called the seller and arranged a viewing.
       
      Faults:
       
      2 x rusty front wings (TADTS)
      1 x rusty rear arch
      Needs a polish
      Tracking is out because new track rod end was fitted for MoT
      Engine has oil leak/s
       
      Good points:
       
      It’s a W124 200E!
      5 speed manual transmission
      New clutch
      Brand new MoT
      Superb MoT history
      4 x as new Continental tyres
      Last owner for 15 years, her husband before that for 4 years
      Very tidy MB-Tex interior
      Drives well
      All electrics work
       
      The dealer kindly delivered the car to my house but I managed a pez station shot on route:
       

       
      Plans:
       
      Remove front wings, cut away rust and apply plenty of wob.
      In-situ similar repair for rear arch
      Clean and polish
      Service engine
      Adjust tracking
      Leave patina and enjoy the car as it is
       
      I will update this thread once progress is made.
       

       

       

       

       

       

       

       

       

       
      Hopefully these two will become good friends.
       

×
×
  • Create New...