Jump to content
dozeydustman

Saab 93 - bad dump valve?

Recommended Posts

I believe either have failed. You really need to get a fault code scanner on it that is capable of reading ABS codes on the 9-3. An OP-COM should be able to do it.

Share this post


Link to post
Share on other sites

I'll have a poke around with the multimeter at the weekend. I'm not busy and the mrs is out helping her friend choose a rescue cat. As long as she doesn't come home with one as well I'll be happy.

I bought a code reader from eBay but it arrived DoA and won't charge up, so looking to get a refund there.

Share this post


Link to post
Share on other sites

I'm tempted by this. Anything I should look for if I go and take a look? Half the mileage of mine. Ideally I'd want to see it running in the car just to make sure no blue smoke or OMGHGF etc.

 

https://www.ebay.co.uk/itm/SAAB-93-9-3-VECTOR-1-9-TID-2006-ENGINE/273361267586?hash=item3fa599eb82%3Ag%3A8a8AAOSw4GFbTiL-&_sacat=0&_nkw=saab+diesel+engine&_from=R40&rt=nc&_trksid=p2380057.m570.l1313.TR2.TRC0.A0.H0.Xsaab+diesel+engine.TRS0

Share this post


Link to post
Share on other sites

I'll have a poke around with the multimeter at the weekend. I'm not busy and the mrs is out helping her friend choose a rescue cat. As long as she doesn't come home with one as well I'll be happy.

 

I bought a code reader from eBay but it arrived DoA and won't charge up, so looking to get a refund there.

The cheap code readers are unlikely to be able to read the ABS codes.

Share this post


Link to post
Share on other sites

The cheap code readers are unlikely to be able to take a charge and actually work

 

 

FTFY

 

I've had 2 turn up that have crapped out on me. Hopefully Stanky is still coming to the mini meet on 25th with his magic box.

 

Got a few small jobs I can be getting on with tomorrow on this car, might just unplug the wheel sensors on both sides and follow your guide SiC - I've had naff all car tinkering time the last couple weeks due to weather, work and some issues with stepdaughter that have taken priority over everything else. Still not found the swirl flap actuating rod, hopefully I can either bodge the loose one back in or remove it completely with everything in situ as I have some quite long long nosed pliers.

 

Regarding that engine on the fleabay, had some more in depth looks at it and it looks like it's a dog. Didn't notice the smashed up timing cover, but there are other things like a bent dipstick tube and things that look a bit broken which to me would say it's been taken out of something that's had a front end smash or a bit of rough handling being extracted from the car. Another will turn up that isn't a stupid price, especially if I search for Vauxhall ones not Saab.

 

Would an XUD fit?

Share this post


Link to post
Share on other sites

As noted on the Grumpy thread Saab died on way home from work. Nursed it home with no power steering and unable to open windows to give a hand signal.

 

Something is eating all the electricity coming from the alternator. Spent a good hour since I got home checking connections within easy reach and earthing points, all are good.

 

14v direct from alternator, only 12.1 at the battery so charge light comes up. Done the usual switching things on and off to see if there is a difference in voltage. Nada.

 

Come to the conclusion that either the main ECU is up the shitter, or there is a short or broken wire in the loom somewhere. It has got to the point that I got to do some serious number crunching and see whether it's replace or repair time. I think this may be the cause of the EML coming on and off at random, and the ABS/ESP/TC randomly not working.

 

Good points:

Economical, comfy, goes like shit off a shovel

 

Bad points:

Mysterious electric gremlin, needs swirl flaps doing, tapping noise (intermittent) from top end.

 

not sure where the main ECU is; don't really want to spend too much as this might not be the problem.

Share this post


Link to post
Share on other sites

14v direct from alternator, only 12.1 at the battery

Unless electrickery on cars has changed massively in the couple of years between the newest car I've worked on and yours, there should be just a fat cable going between the B+ terminal on the alternator and the +ve post of the battery (although it may go via other places on the way), so to drop two whole volts between the Alt and Battery means there is something very wrong with that cable, or your battery has internally shorted and is dragging current like a bastard.

 

I've no idea of the layout in your car, but can you trace that cable, and where it goes and what it connects to on the way? I syspect you'll find something chafed almost completely through, or very badly corroded. Quite what, I'm not sure, but there's something quite wrong there, and it's fairly basic.

Share this post


Link to post
Share on other sites

I am going to whip the battery out, give it a charge, then get it tested. It's only a few months old and has guarantee, I'm really hoping it's not that, but in a way I also am hoping as it's an easy fix.

 

The big wire from the alternator goes via the starter according to the "typical wiring diagram" the HBOL has. If I can find a decent diagram instead of Haynes' old tripe then it gives me a better chance of finding a bad connector or fault. Could be the starter motor or solenoid if this diagram is correct.

 

The main part of this sub-loom appears to go round the back of the engine, then under it, then back across it, then over it, then disappears somewhere else before it gets to the battery.

 

Could just run a feed directly from the alternator to the battery.....

Share this post


Link to post
Share on other sites

Right, battery is on charge, though it's either i) not totally flat as the charge rate is extremely low or ii) knackered as the "charged" indicator on the (borrowed) charger has been flashing on and off after 10 minutes of being on. Must get it tested tomorrow just to rule this out.

 

Been probing with my ancient multimeter set to continuity. Trying to trace the wire from the alternator to see where it ends up before going to battery. I may have a short somewhere. Component, frayed wire - not sure yet as I need to poke around a bit more. One probe fixed into the +ve battery lead and poking around seems to reveal that anywhere EARTHED makes continuity. Jiggled some parts of the loom but made no difference. B+ terminal of alternator direct to battery +ve clamp shows NO continuity.

 

Think I'm going to need to spend a couple more hours looking for this one - I'm used to proper cars with mechanical engines and only 5 wires! A decent wiring diagram would help instead of the crap in the Haynes' manual with its 'typical' layouts.

Share this post


Link to post
Share on other sites

 

 

And I've replied :D

 

The weird thing is the 2 volts dropped on route to the battery, which would suggest a part is draining somewhere, the battery is kaput, or there is a short. I'm thinking the last of those three as there shouldn't really be any connection to an earth from the battery positive!

Share this post


Link to post
Share on other sites

Get similar things happen when I test components on my old consoles and build electronic things. I'll report back with the battery diagnosis tomorrow afternoon. Starting to have brainfarts now which means I should go to bed.

 

But I'll still be commenting on here at half 10 no doubt.

Share this post


Link to post
Share on other sites

Battery tested, it's still good, so that rules one item out.

 

Reconnected it to the car via an ammeter. 250mA initially when connected, soon dropped to below 50mA when electricity had weedled its way through the car (about 3 seconds).

 

Reconnected car properly, cranked over, initially again only 12.1v at the terminals, but after putting a good load on - full beam, heater, radio, anything else I know takes a lot of power, voltage shot up to 13.4v.

 

Turned all this off and then voltage stayed steady at 12.9v. Went for a 5 mile drive, got back, measured voltage at battery with engine running, still at 12.9v, going up to 13.1v after a minute or so.

 

I'm wondering if there's a bad or iffy connection somewhere that needs a bit of extra power to make it good, so this week is going to be spent looking (again) at all the earthing points around the car, possibly add a couple of earthing straps between engine and body if needed.

 

Had a theory though. A few months back all of a sudden the passenger side mirror just folded itself in on its own, and the button to fold/unfold no longer works. The driver's side mirror that hadn't adjusted or folded electrically also started working. Just wondering if this has something to do with it. There's no sound of an electric motor trying to move anything at any time.

Share this post


Link to post
Share on other sites

How easily can they be disabled? Since its the sort of thing that you set right once then leave forever is it worth just disconnecting the electrics to them both once set to the right position? Even just for good measure?

 

EDIT - if this gets bridged, can I put in a speculative request for the swan-neck bit of the washer bottle if its not totally broken like mine is? Sorry if its a bit too soon, but you know sometimes threats help with these sort of issues. go and mutter to it that it had better buck its ideas up because the vultures are already circling sort of thing...

Share this post


Link to post
Share on other sites

How easily can they be disabled? Since its the sort of thing that you set right once then leave forever is it worth just disconnecting the electrics to them both once set to the right position? Even just for good measure?

 

EDIT - if this gets bridged, can I put in a speculative request for the swan-neck bit of the washer bottle if its not totally broken like mine is? Sorry if its a bit too soon, but you know sometimes threats help with these sort of issues. go and mutter to it that it had better buck its ideas up because the vultures are already circling sort of thing...

 

 

I think it's just a case of pulling the fuse but I'll check later when I've had supper. Could always just pull the connections out the doors behind the trim.

 

Bridge is my last resort. Ideally I want to use the car until the MoT runs out in April then offer as spears and reapers it to another shiter for similar money than weigh it in. WBAC offered me £15 including the private plate (valued at £500), so they can FRO. If I can sort this issue out for pence then I'll spend a few quid sorting the emissions and EML fault(s)

Share this post


Link to post
Share on other sites

Are you certain the alternator is putting out 14v at the terminals? As it's pretty much a direct feed, it should be going through. Double check that the cable from the alternator to starter is clean and fixed properly. Maybe even run a feed directly from the alternator to the battery terminal too.

Share this post


Link to post
Share on other sites

Are you certain the alternator is putting out 14v at the terminals? 

 

 

13.9 on my digital, 14 on my swing-needle meter.

 

 

Double check that the cable from the alternator to starter is clean and fixed properly. Maybe even run a feed directly from the alternator to the battery terminal too.

 

 

First thing I checked earlier - everything appears to be nice and secure. Latter is an idea I've been mulling through my head. The waggling of the negative lead tends to make the meters fluctuate as opposed to the positive, which is why I'm going to give the earthing points a going over. Again. And add extra earth straps if needed. Still not ruling out a failing component taking a higher than normal load.

Share this post


Link to post
Share on other sites

Tried putting a jumper cable between the engine block and battery negative terminal? Makes a nice chunky ground path.

 

If the alternator terminal is putting out 14v, the battery should be at that level too! The alternator to battery link should be so low impedance that for something to be dragging it down that low, it'd be getting incredibly hot.

 

My suspicion is highly on the positive link from the alternator to starter to battery. Or a bad earth from alternator to battery.

Share this post


Link to post
Share on other sites
Guest Hooli

I don't know if I said it earlier but check the alternator is earthing to the engine correctly too. I had that once years ago & took me ages to find.

Share this post


Link to post
Share on other sites

I have never had an alternator fail in 44 years (obviously I am a lucky sod) BUT I did once buy a car that wouldn't charge: 14volts at the alternator gave 12volts at the battery. This was because the alternator was mounted via rubber bushes and the earth strap between alternator and engine was U/S.

Share this post


Link to post
Share on other sites
Guest Hooli

I have never had an alternator fail in 44 years (obviously I am a lucky sod) BUT I did once buy a car that wouldn't charge: 14volts at the alternator gave 12volts at the battery. This was because the alternator was mounted via rubber bushes and the earth strap between alternator and engine was U/S.

 

That was the issue I had on a Manta.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By 1970mgb
      So, someone posted on another thread a link to an Ebay listing for an LHD '74 Marina listed on Ebay.
      I called a little while ago and talked to the seller, and the story is that it was a good running and driving car 10 years ago, but has been neglected and won't run. I'm debating with myself about whether or not I want to take it on as a project.
      I know these had a terrible reputation when new, but at the same time they're actually legitimately rare in the US. I have seen one in person, and most of the estimates I've seen put the number of survivors at 10-20(although I don't know how much we can trust that).
      There's some definite appeal in the engine familiarity for me with the MGB. I MIGHT have to convert it to a manual though. In addition, there's the issue of having it shipped a couple hundred miles to me. It's listed now for $700...if I could do $500 it might be a make or break for me.
      Any thoughts here on it?
       
      EDIT: The car as it sits now is an automatic. If I swapped the transmission, it would be to a manual. Sorry for any confusion from my incorrect statement!
    • By blackboilersuit
      After many a long year of occasional contribution on here I've probably got enough old shite on fleet now to do something I should have done yonks ago and start a project thread.
      The story so far.........
      I had an 02 CRV for 6 years and it performed faultlessly as an car taking everything in it's stride. The only issue with it was the 25mpg it returned but as I worked close to home that wasn't an issue. Cue December last year and a new job saw my commute go up from 4 miles a day to 32 miles a day.

      By March I was drowning in green shield stamps so  bought the mighty diesel disAstra from Davehedgehog of this here parish. Shown here on the only off-road parking and only second car parking space I have. The garage contains a few motorbikes so I've always stubbornly stuck to a single car rule so I don't have to move motors to get bikes in and out. More on this detail in a bit.....

      A combination of broken motorcycles needing worked on, a bike trip around the Baltic and work meant that I soon realised that I had no time to prep the disAstra for its MOT  at the start of this month. It wasn't worth enough to pay to have the work done so I decided that the poor old thing would be scrapped in favour of a replacement motor.........
      The mighty Volvo (V70 D5) was purchased from Ma & Pa forddeliveryboy of this parish and migrated north of the border back to it's natural home.

      Three days after being pressed into commuting service the mighty volvo suffered a (badly) sticking caliper and much burning brake smells that had to be stripped and rebuilt before work the next day. Sticking piston at that so the whole thing was off and the brakes had to be bled afterwards. Two and a half hours in the pissing rain was a bit character building especially as the still MOT'd (by 3 days) and taxed (but not insured) astra was sitting on the drive. Decision made, insurance checked and a soon to be taken out Admiral multi-car policy will see me with two cars on the fleet again. I could have used one of the bikes but motorway commuting in the pissing rain on two wheels is no fun. The volvo needs an MOT in december so having the astra back on the road will take the pressure off getting that done if it needs work and the weather is bad.
      And so as the volvo continues to provide daily service, project astra revival starts. Known MOT work needed is frilly arches,  broken number plate and front discs and pads so nothing major. Thus far the arches have been sorted without resort to duct tape.
      After a bit of prodding.......

      And after the angle grinder was let loose surprisingly it was only the return lip that was rotten so the welder was broken out to lash on some roughly cut fresh metal.

      Linished off filled, sanded and primed. Note the use of a farmfoods brochure pulled out the bin being used as masking paper for extra shite points.

      Followed by a near perfect colour matched (*) top coat....

      Well I had black on the shelf and it's good enough to stop the primer soaking up the water so that'll do for now.
      Hoping to get brakes and MOT sorted in the coming week so more to follow soon (hopefully).
    • By Fumbler
      To mark the genesis of my fleet project thread I here present my new car: a 1997 Nissan Micra Shape-


      It really looks that good. There is a reason for this: its previous owner was an old lady who loved the thing so much so she made every effort to keep it in good shape. It originally came from Fleet in the GU postcode which suggests to me it was bought by the present dealer at auction, hence arriving down here in Kent. Before seeing the car I checked its MOT history and its only fails were thanks to broken stoplights, which shows me that it was very well cared for. I suppose an example of this was that on the last MOT, an advisory was a corroded rear silencer. The silencer on the car when I saw it was new. Methinks the lady wanted to keep it as good as possible. It was kept in a garage and so all the bumpers and black trim are very black and the tyres are in very good condition. Spare never used! Also included a free Dettol first aid kit from 1997.
      This car has 15000 genuine miles on the clock. We clocked over 15000 during the test drive! The lady owner really only trundled around her village in it and the MOT shows that it only did some meagre miles between tests. This, of course, came at a price. We saw a cherry red Micra from 2002 at the same dealer. Paint was shoddy and when they washed it the boot had massive sections of bare metal and it wasn't very happy. This car, however, is in fabulous condition and there was no contest between the two cars- it really is that good, inside and out. Immaculate interior, driver's airbag, cassette player... all there and all functioning (apart from cassette thanks to new battery and failed display). This meant that I bought it for £1600, £100 over what was my uppermost limit, but I knew I wouldn't see another like this that was in as good shape for a fair while. It was priced very ambitiously, at £1990, so I'm content in the fact I managed to slash a few hundred off the price. There wasn't that much paperwork though. All the dealership received was the logbook with 3 service stamps from 1998, 1999 and 2000, the radio key pass, a National Trust sticker, and the original paperwork holder. I suspect the old lady died and had her car auctioned, and the massive file of paperwork is now someone's egg carton, along will everything else she owned.

      As always, this car isn't exactly in showroom condition. While the inside is great and the floor is solid, and the underseal is in great shape, the not undersealed parts need a small looking at. Mainly the rear of the driver's side sill. It's really the only bubbling on the car. I suspect a well aimed stonechip managed to fester over the wintery salted roads, making it rust even more. It's around the size of a 5p piece, and will give me the opportunity to spray the insides of the sill with some chain oil to prevent any further corrosion. Behind the fuel tank there are a few rusty joints- places where the spraygun cannot get paint onto- which some Vactan and Dynax should put to rights. Alternator belt looks original because of the cracking and Nissan badges and will need doing soon as well as the front plate. As much as I like the 90's font and original dealer surround, the dishevelled R and general water ingress is a persistant MOT advisory. It could be the MOT station being strict (and most likely is considering there's a Saxo down the road with far worse blackening), however for the sake of peace of mind and all that, I'll get a new one made. The rear has already been replaced indicating this has happened before.
      All in all, I think this is a nice plucky motor. I'll have it by the end of the week; just got to sort out tax, insurance, and it's going to have an MOT. As part of the deal it's getting the MOT and an oil and filter change which will be something ticked off the list. It has some love scratches and chips here and there, but it drives well, is stiff and controllable, and should make out to be a nice summer project!
    • By Zelandeth
      Well I've been meaning to sign up here in forever, but kept forgetting. Thanks to someone over on another forum I frequent poking me about it recently the subject was forced back into my very brief attention span for long enough to get me to act on the instruction.

      I figure that my little varied fleet might bring you lot some amusement...

      So...we've got:

      1993 Lada Riva 1.5E Estate (now fuel injected, as I reckon the later cars should have been from the factory...).
      1989 Saab 900i Automatic.
      1987 Skoda 120LX 21st Anniversary Special Edition.
      1985 Sinclair C5.
      2009 Peugeot 107 Verve.

      Now getting the photos together has taken me far longer than I'd expected...so you're gonna get a couple of photos of each car for now, and I'll come back with some more information tomorrow when I've got a bit more time...

      Firstly...The Lada. Before anyone asks - in response to the single question I get asked about this car: No, it is not for sale. Took me 13 years and my father's inheritance to find the thing.


      Yes, it's got the usual rusty wings...Hoping that will be resolved in the next couple of months.

       






      Next, a proper old Saab. One of the very last 8 valve cars apparently, and all the better for it. I've driven two 16v autos and they were horrible - the auto box works sooooo much better with the torque curve of the 8 valve engine. Just wish it had an overdrive for motorway cruising...









      Next up a *real* Skoda...back when they put the engine where it belongs, right out the back. In the best possible colour of course...eye-searingly bright orange.







      Seat covers have been added since that photo was taken as it suffers from the usual rotting seat cloth problem that affects virtually all Estelles.

      Then we have possibly the world's scruffiest Sinclair C5...



      Realised when looking for this that I really need to get some more photos of the thing...I use it often enough after all! We have a dog who's half husky, so this is a really good way of getting him some exercise.

      Finally - again, I really need to take more photos of - we have the little Pug 107.



      Included for the sake of variety even if it's a bit mainstream! First (and probably to be the only) new car I've bought, and has been a cracking little motor and has asked for very little in return for putting up with nearly three years of Oxford-Milton Keynes commuter traffic, before finally escaping that fate when my housemate moved to a new job. Now it doesn't do many miles and is my default car for "when I've managed to break everything else."

      I'll fill in some more details tomorrow - I warn you though that I do tend to ramble...
    • By TripleRich
      Hi all, new to the forum.  Thought you might be interested in what I've got myself into
      I'd been after my first classic car for a while.  If it's big and made in the 70s I'm interested.  Looked at few things like P6s, Zodiacs, Victors, SD1s and various other things.  Problem was I didn't want to spend a boatload of money on something that looked alright but underneath was actually a total heap.  The solution was to buy a complete heap in the first place and spend the money fixing it.
      So in January I went ahead and bought this from a colleague at work who was moving away and needed to get shot of it.

      It's a part finished restoration (I prefer not started) and it needs a whole load of help if it's going to stand any chance of using a road again.
      Pros
      It's right up my street.  Granada Coupes are quite odd and certainly stand out from the norm.
      It still has the original engine, box, interior and most trim.
      It came with loads of panels I need to repair it (mostly original Ford stock).
      It came with so many spares I could probably build a few Granadas and still have stuff left over.
      It was cheap.
      Cons
      Most of the front end has been cut off.
      Most of the body structure is quite rotten.
      It's going to take me ages.
      I work at a restoration company and my boss kindly allows me to keep the car there.  So I've got access to all the gear I need to restore it.  I've been busy on the car for a while now so will post more pics over the coming days.
      Cheers 
×
×
  • Create New...