Jump to content
dozeydustman

1999 Corolla of Pleasure - service pt2 ongoing

Recommended Posts

Mrs Dustman has a dash cam she wants me to fit to her '99 frog face Corolla. It came with a hard wire kit as opposed to the usual fag lighter lead, so I might as well make a decent* job of it and hide the wiring completely. Trouble is I can't remember how I got the radio pod out when I fitted the DAB unit she now has. I've also got a few dash illumination bulbs to change so I might as well do it all in one hit while it's a sunny afternoon.

 

A bit of googling comes up with the US spec dash which appears to be different from the European model, or the 2002-on model. I seem to remember spudging out the dash vents to access some bolts/rivets.

 

Failing that, is there an easier place to get a switched live from (besides the radio) that doesn't involve destroying the car's interior?

Share this post


Link to post
Share on other sites

Fourthed. I wired my car kit up into the xantia with one of those! Got one left which I may use to wire a 12v socket next to the dead 12v socket in the centre console for my phone charger one of these days

Share this post


Link to post
Share on other sites

Thanks all for your recommendation. I eventually found a way of getting a switched live from the radio feed, though I suspect it's a temporary job as I had to use some fine* skills with the gas soldering iron. The piggyback fuse adaptor looks like a good idea so I may do this in the near future.

 

I've thinned out the pics I took during fitting, but someone else may find these useful, especially if hardwiring another accessory or fitting a digital radio aerial.

 

1) site camera. This one (Apeman) only came with a 3M sticky pad mount so once it's up, it's staying. I mounted it behind the rear view mirror so as not to prove a distraction while Mrs D is on the road.

 

post-24583-0-60054800-1517759764_thumb.jpg

 

2) I managed to stuff the hard wire cable up into the headlining and down the a-post trim. Cable zippers are needed to keep everything in place ideally.

 

post-24583-0-38628100-1517758466_thumb.jpg

post-24583-0-40008500-1517758499_thumb.jpg

 

3) Wouldn't even know I'd been in there......

 

post-24583-0-13272500-1517758714_thumb.jpg

 

4) Now for the vents. The little grilles just popped out, but the bezel needed spudging with a suitable* tool

 

post-24583-0-40401500-1517758784_thumb.jpg

 

5) locating the securing bolt was tricky, but using the highly scientific* method of poking around with a finger to locate and find what size it was revealed both the location and "it feels like 10mm" and was duly removed. I think there should be two of these judging by a second screw hole so when I do a better job on this I'll find a replacement.

 

post-24583-0-19132800-1517758876_thumb.jpg

 

6) Radio pod out. Bugger, the switched live (red) doesn't have a double bullet. Permanent live (yellow) does. Looking at the fuse holder inline to the kit's wiring was made of finest chinesium, and came apart quite easily. I spliced this end into the car's loom BEFORE the radio multiplug with a solder joint and a bit of heatshrink to insulate. It came with a scotchlock type joiner - no thank you.

 

post-24583-0-28560500-1517759071_thumb.jpg

post-24583-0-09197500-1517759167_thumb.jpg

post-24583-0-62178000-1517759210_thumb.jpg

 

 

7) Radio mounting frame made an ideal* earth point.

 

post-24583-0-44997700-1517759430_thumb.jpg

 

8) quick fire up of the ignition and all worked well, no smoke or blown fuses. Mrs D just needs to get her memory card now. Refitting is the reverse of removal.

 

post-24583-0-37070600-1517759816_thumb.jpg

 

 

I took the car on a short 15 minute run and no fuses blew nor smoke pouring out of the dashboard. 6ft 5 man in little Japanese car isn't particularly comfortable though. I'm happy this method worked but I wouldn't recommend splicing into the loom in a tight-ish as a permanent solution, so the piggy back connector will be ordered soon.

 

Meanwhile Mrs D was texting me and moaning the wipers bang the scuttle when in use. Small adjustment made

 

post-24583-0-39324500-1517760384_thumb.jpg

 

It's in all a sweet little car, if a little bland, and it never seems to go wrong. I did think it was pure old-man's poverty spec, but it's a run out edition before they gave them the facelift.

 

post-24583-0-13530100-1517761049_thumb.jpg

 

 

Share this post


Link to post
Share on other sites

Watching this with interest as I have a similar device to go in. Going to wait and see how the Megane does at the MOT next month before committing to hard wiring it in.

 

Ps the dash of the bug eye Corolla and the facelift are different. One of them is the same as the US versions but I cant recall which. I really like these but theyre not actually that cheap, probably because they are so good!

Share this post


Link to post
Share on other sites

Been 2 weeks since Mrs D bought some new black round things for the Corolla. With the Saab currently Failing to do anything I've been using this car as well.

 

We've had Falken Sincera SN832 tyres fitted. We chose wet grip performance over economy and noise because 1) the old tyres were shite and 2) with stepdaughter being a new driver we didn't want her sliding and skidding all over the place.

 

After 2 weeks and nearly 500 miles we're both so far impressed with the Falkens. We've not had any real wet weather to test them in, but the dry grip is significantly improved to the point there is no squeal when cornering even at low speeds, and even pushing the car hard in the twisty bits there's no drifting or back end trying to break away when lifting off the throttle. Braking distance is noticeably reduced as well.

 

Road noise is different. There's not a lot of rumble coming through from the surface, but there is a droning from the tread. Not off-putting, but there's a hint of air-raid siren to it (especially at 50mph when it hits B minor). 

 

Will report back after 2000 miles or so, or when we've had some proper wet weather.

 

Next in store for this little car is reinstate the dash panel lighting then a full service, including cam belt, ready for winter. Not done a 16 valver before. Better get my nose in the book of lies.

Share this post


Link to post
Share on other sites

A few months on and the Falkens are still proving good service after about 3000 miles, the car is quite grippy though we have a leak somewhere on the NSF wheel. It's not cracked so I'm going to get our local tyre place to seal the rim, would have done it today when I had the tracking checked and front wheels balanced - OSF one had gone 35g out of balance, so I think we lost a wheel weight. I've often found stick-on weights come off if the fitter hasn't pressed them on hard enough or cleaned the wheel sufficiently.

 

New belts are squealing again so they'll be adjusted over the weekend. Never known a car to squeal so much at startup or belts to go out of whack so quickly when new.

 

MoT is in June, and I need to find a knock from the suspension. Everything looked ok when I had a quick glance earlier, nothing too badly perished or wobbly, so that'll be a project when I get my garage in a few weeks.

Share this post


Link to post
Share on other sites

Knock from suspension appears to be o/s bottom ball joint.

 

In other news I've had the leaking rim sealed. Ideally I'm after a second set of wheels for this car for next winter, either steelies or OEM alloys, 14", so I can get the wolfraces that are original to the car refurbed.

Share this post


Link to post
Share on other sites

This little bug-eyed car is due it's MoT next Monday, so I will have some work on the car and updates to this thread at last. Need 2 split pins though for the ball joint castle nuts.

Share this post


Link to post
Share on other sites

Car is booked in for its MoT tomorrow afternoon at our friendly garage, but unfortunately I've been unable to get the ball joints off due to both illness and the castellated nuts being siezed in place. My neighbour with the angle grinder and extension lead isn't about so the garage will have to do this for me.

No split CV joints thank fuck, drop link rubbers are touch and go, and needs a brake light bulb. I can't find any other problems with the car so hopefully just a bill for fitting the supplied balljoints is all it'll need.

List of jobs I know it needs.

  1. Replace brake light bulb
  2. replace o/s/f wing
  3. regas air con & change pollen filter
  4. investigate ticking - might be the PAS pump
  5. Change water pump & flush out cooling system.
  6. thoroughly clean interior.
  7. save up for respray?

Wife & stepdaughter both love this car because it's so reliable, so I'm going to try my best to another 20 years and 180k miles of motoring out of it.

Share this post


Link to post
Share on other sites

Many kinds of Joy!

2072771912_toyotamot1.thumb.jpeg.fe391958ec189dfba9367d1ad1ee554f.jpeg

 

1606576940_toyotaMot2.thumb.jpeg.f569dccccc1168862ce37bf5ecd0a64c.jpeg

 

One advisory, and the rim has been like that for as long as I have been with Mrs D. Garage spent yesterday afternoon and half of today removing the ball joints, even grinding off the top of the castle nut & split pin hole they put up a hell of a fight. Then again I don't think I'd move easily if I'd been installed in the same place for 20 years. Emissions at idle are 0.0% CO and fast idle 0.02% so she's still running really clean. 

On 6/9/2019 at 3:53 PM, dozeydustman said:

List of jobs I know it needs.

  1. Replace brake light bulb ✔︎
  2. replace o/s/f wing
  3. regas air con & change pollen filter
  4. investigate ticking - might be the PAS pump
  5. Change water pump & flush out cooling system.
  6. thoroughly clean interior.
  7. save up for respray?
  8. Unseize track rod ends for purposes of wheel alignment and future replacement.

I can tick No 1 off for a start. 25 or so years ago when I first started reading Practical Classics, Classics Monthly and the like there was outrage with Avengers, Allegros, Mk 2 Escorts and that sort of 70's family car being restored. Maybe I should do a top notch job on this and send in my report just to upset some old giffers.

Share this post


Link to post
Share on other sites

Hmm.

Last night after coming home from my father in law's with the wife and stepdaughter, this little car has thrown up an oddity.

With the sidelights on, all the brake lights come on. Pressing the brake pedal makes the brake lights come on and the front sidelights, but not the rear.

Main headlamps on, pressing the brake pedal makes the rear sidelights come on.

I might have a crossed wire somewhere.

Share this post


Link to post
Share on other sites

wrong type of bulb been put back in a holder .....  ie a single filament bulb in a twin filament holder , they are not suppost to fit but ....

some one I know did this and caused a  similar   problem ...... 

Share this post


Link to post
Share on other sites

I'll give that a check later, what came out was a twin filament, and that's exactly what's gone back in. Could be I have it in the wrong way round or the holder is faulty/knackered as well. Will investigate at some point this week, the car rarely goes out in the dark any way so at the moment it's not a massive issue. Report to come at some point this week no doubt.

Share this post


Link to post
Share on other sites

Well, 3 months have passed and no I've not been driving the car with a faulty set of brake lights. Stop/tail bulb had shorted internally.

Mrs and madam have been complaining about a rattle over the last week. Wife thinks the car is going to break down. Hmmmmm

IMG_7827.thumb.JPG.0edb5f626275402bfdf679572bcdcf9d.JPG

There's a bolt & nut missing from this shroud. Holding the corner means the rattle goes. I'll get a new bolt in the morning.

IMG_7831.thumb.JPG.4b75e2102cb80ca2406d77e3ccb2ef4f.JPGIMG_7832.thumb.JPG.8c957e192aca400fa33cd01d637cd771.JPGIMG_7833.thumb.JPG.51a62ca0b1205fd7144f29e468393531.JPG

20 year old exhaust system still going strong! I think it'll need to be replaced soon though. Car is straight as a die and completely grot free underneath though.

Share this post


Link to post
Share on other sites

6mm machine screw, nut & a shake proof washer seems to have cured it. Hopefully it'll last.

IMG_7838.thumb.JPG.90f8b97298d01c9813c60cd7d667aa4b.JPG

Couldn't find any brass ones at neither Homebase, Wickes, and local tool station only had brass nuts, so stainless* will do for now. Could have gone to Arundel to a specialist screw, nut & bolt shop but they have a minimum order of 5 of any item, would have been a lot more.

*packet says stainless but I'm doubtful - it was from Homebase

Share this post


Link to post
Share on other sites
On 6/9/2019 at 3:53 PM, dozeydustman said:

 

  1. Replace brake light bulb 
  2. replace o/s/f wing
  3. regas air con & change pollen filter
  4. investigate ticking - might be the PAS pump This has gone away with proper adjustment of fan belts. Again. I think it's the water pump, I have a new one.
  5. Change water pump & flush out cooling system.
  6. thoroughly clean interior.
  7. save up for respray?
  8. Find new interior trim parts that are broken or missing.

I'm actually looking forward to doing a rolling restoration on this car. Going to, over a number of years, acquire suspension, engine, drivetrain parts & spares to do it. This car isn't shite - it's fucking awesome.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Fumbler
      To mark the genesis of my fleet project thread I here present my new car: a 1997 Nissan Micra Shape-


      It really looks that good. There is a reason for this: its previous owner was an old lady who loved the thing so much so she made every effort to keep it in good shape. It originally came from Fleet in the GU postcode which suggests to me it was bought by the present dealer at auction, hence arriving down here in Kent. Before seeing the car I checked its MOT history and its only fails were thanks to broken stoplights, which shows me that it was very well cared for. I suppose an example of this was that on the last MOT, an advisory was a corroded rear silencer. The silencer on the car when I saw it was new. Methinks the lady wanted to keep it as good as possible. It was kept in a garage and so all the bumpers and black trim are very black and the tyres are in very good condition. Spare never used! Also included a free Dettol first aid kit from 1997.
      This car has 15000 genuine miles on the clock. We clocked over 15000 during the test drive! The lady owner really only trundled around her village in it and the MOT shows that it only did some meagre miles between tests. This, of course, came at a price. We saw a cherry red Micra from 2002 at the same dealer. Paint was shoddy and when they washed it the boot had massive sections of bare metal and it wasn't very happy. This car, however, is in fabulous condition and there was no contest between the two cars- it really is that good, inside and out. Immaculate interior, driver's airbag, cassette player... all there and all functioning (apart from cassette thanks to new battery and failed display). This meant that I bought it for £1600, £100 over what was my uppermost limit, but I knew I wouldn't see another like this that was in as good shape for a fair while. It was priced very ambitiously, at £1990, so I'm content in the fact I managed to slash a few hundred off the price. There wasn't that much paperwork though. All the dealership received was the logbook with 3 service stamps from 1998, 1999 and 2000, the radio key pass, a National Trust sticker, and the original paperwork holder. I suspect the old lady died and had her car auctioned, and the massive file of paperwork is now someone's egg carton, along will everything else she owned.

      As always, this car isn't exactly in showroom condition. While the inside is great and the floor is solid, and the underseal is in great shape, the not undersealed parts need a small looking at. Mainly the rear of the driver's side sill. It's really the only bubbling on the car. I suspect a well aimed stonechip managed to fester over the wintery salted roads, making it rust even more. It's around the size of a 5p piece, and will give me the opportunity to spray the insides of the sill with some chain oil to prevent any further corrosion. Behind the fuel tank there are a few rusty joints- places where the spraygun cannot get paint onto- which some Vactan and Dynax should put to rights. Alternator belt looks original because of the cracking and Nissan badges and will need doing soon as well as the front plate. As much as I like the 90's font and original dealer surround, the dishevelled R and general water ingress is a persistant MOT advisory. It could be the MOT station being strict (and most likely is considering there's a Saxo down the road with far worse blackening), however for the sake of peace of mind and all that, I'll get a new one made. The rear has already been replaced indicating this has happened before.
      All in all, I think this is a nice plucky motor. I'll have it by the end of the week; just got to sort out tax, insurance, and it's going to have an MOT. As part of the deal it's getting the MOT and an oil and filter change which will be something ticked off the list. It has some love scratches and chips here and there, but it drives well, is stiff and controllable, and should make out to be a nice summer project!
    • By captain_70s
      Hullo,
       
      I'm a masochist from Leeds who is running two rusty, worn out Triumph Dolomites as my only transport in rural Aberdeenshire. You might recognise me from various other forums and Facebook groups. Realistically I need to buy a modern car of some sort, but instead I find myself looking at £300 Citroen BXs and Triumph Acclaims on Gumtree and thinking "yeah, that'd fit right in with the rest of the broken cars I can't afford".
       
      On to the cars, the main attraction being my 1976 1850HL "50 Shades of Yellow" that I bought for £850 and is currently my daily driver, here is a picture of it before I sanded off some surface rust and sprayed it badly in the wrong shade of yellow with rattle cans:
       

       
      Within a month of purchase I managed to plant it in to a steel fence backwards after a botched gear change on a wet roundabout and ruined the N/S rear wing, although judging by the other dent that's packed with filler it looks like somebody had already done the same. I also managed to destroy a halfshaft and one of my Sprint alloys (good for an extra 15hp) in the incident, so now it's sitting on it's original steelies but painted black (good for an extra 5hp).
       
      It's only broken down on me twice. once with some sort of fuel delivery related problem which may or may not have been an empty fuel tank and once when the thermostat jammed shut and it overheated and blew out some O-rings for the cooling system. It has recently developed a taste for coolant and oil which is rather annoying, although it's done 89,300 miles which is about 80,000 more miles than BL engineering is designed to last, I'm keeping my eye on eBay for replacement engines... 
      I tried to keep ahead of the rust a bit by rubbing down the arches and re-painting them, but apparently rattle can paint isn't great when you are spraying it at -5C, it also highlighted how although my car might have been Inca Yellow in 1976 it's now more of a "cat piss" sort of shade. So I ended up with the wrong shade of yellow which has rust coming back through after 5 weeks. Did I mention I'm incompetent?
       
      The other car is the first "classic" car I bought, so I can't bear to sell it. It's a '77 Dolomite 1300 and it cost £1400 (about £400 too much) and has been nothing but a pain in the arse:
       

       
      It looks much prettier (from 100 yards) but that's most due to the darker paintwork hiding the rust. It lives a mollycoddled life in my garage, where it somehow still manages to rust, and is utterly rubbish. 0-60 is measured on a calendar, top speed is 80ish but at that point it uses more oil than petrol, it rarely ventures over 50mph and if you encounter an incline of any sort you can kiss that sort of speed goodbye, along with about £20 of 20W50 as it vanishes out of the exhaust in the form of blue smoke.
       
      One of the PO's had clearly never heard of the term "oil change" so it developed into brown sludge that coated everything internally with the next owner(s) blissfully pouring fresh oil on top of it. This lasted until about 600 miles into my ownership when there was muffled "pop" from the engine bay and the car became a 3-cylinder. The cause was catastrophic wear to the top end causing a rocker arm to snap:
       

       
      As this was my first classic car I'd assumed it was supposed to sound like the engine was full of marbles, it wasn't.
       
      I put the engine back together with second hand bits declared it utterly fucked and promptly did another 5000 miles with it. After about 3500 of those miles the oil burning started, valve seals have gone so it's been relegated to my parent's garage as a backup car and something to take to local car shows as the 1850 is now embarrassingly ugly. I'm keeping my eye on eBay for replacement engines (deja vu, anybody?) Oh, I also recently reversed it into a parked Ford Fiesta and royally fucked up the rear bumper, rear panel and bootlid. Did I mention I'm incompetent?
       
      There have been two other cars in my life. My first car, a 2008 Toyota Yaris 1.0 an it's replacement a 2012 Corsa 1.4T. I didn't really want either of them, but it's a long story involving my parents and poor life choices. Ask if you want to hear it!
       
      So that's a brief summary of my current shite. If you want more pictures or details of anything do say as I've got photos of almost everything I'd done with the cars.
    • By Tickman
      First some background:
      I was brought up with no car interest, a car was transport and nothing more which resulted in a selection of poor cheap cars being the cars of my youth.
       
      Fast forward many years (just over 9 years ago) and I have a wonderful* Vauxhall Vectra estate to carry us about. Unfortunately it is crap and throws fault codes at us with nothing being there when it is checked (even at Vauxhall)
       
      As Mrs T is the main pilot of this chariot with the two little miss T's on board, it has to go.
      The hunt is on for the new steed to safely and comfortably carry the family around. I have a company car at the time so big journeys are not an issue.
       
      ebay is my weapon of choice to find the new family car. It has to be good value cheap for no other reason than I am tight.
       
      Weeks of research with lots of cars that are too expensive and too far away for easy collection end up in my watch list.
      Finally a possible is spotted in Fife. I go and have a look and find a poor looking but solid car. One previous owner and lots of history.
       
      The auction was to end on the Saturday at midday, we were going to be out! I decided on how much I was willing to gamble on it and on the Saturday morning I put in my max bid but straight away it went to my max bid, I was winning but it had three hours to go with no room for me to go up! We went out anyway.
       
      I spent the next three hours kicking myself for not bidding more while we were out as it was the first car I had seen that fitted my criteria. Fate was in charge.

      On returning home I go straight on ebay to find 'Congratulations.............'
      For the grand total of £500 I had just won this fine vehicle!
       

       
      It has 5 months MOT and after fitting seat belts in the rear for the girls car seats it is pushed into daily service.
      My gamble and subsequent use results in a perfectly reliable car that actually does what it is supposed to do.
       
      Even more importantly Mrs T loves it so a win all round.
       
      All my cars have names (most are earned over a bit of time) and this one is called 'Gwendolen' ( G reg car and from Wales originally. I hate the name but I am not going to argue)
       
      That sums up part one, more will be along later (probably much later)
×
×
  • Create New...