LightBulbFun Posted March 28, 2021 Share Posted March 28, 2021 5 minutes ago, Tim_E said: Looks like the sort of thing @LightBulbFun would be doing too! your not entirely wrong there LOL (I have not progressed with it any further as my room is a complete mess currently and my work desk blocked up but when/if I can ever get it cleaned up I do plan to continue working on it) On 11/06/2019 at 12:59, LightBulbFun said: decided to have another Bash at trouble shooting a Vintage Philips Radio I picked up in late 2013 from a charity shop in east Grinstead, at the time I deduced with a dim bulb tester and a variac that the mains input was dead short, but could not figure out how to pull the chassis out to investigate further well I still have not figured that out, but did figure out how to get enough access to let me have a closer look at things well I think I have sussed the issue snipped the sad looking capacitor out and no more mains short only problem is im not sure what value this cap is so I can replace it properly, nor do I currently have any schematics, sadly it exploded right where the markings are and I can only make out a H33KP and a 6 bellow that I think ill tentatively wire up the radio to my variac via dim bulb tester and see if I get any more life out of it sadly this radio is full of these black caps (I know they have a name in the "trade" but i cant recall it atm, just that they like to fail like above LOL) so I know ill have to replace all of those at some point as well if anyones wondering the Radio is a Philips 131U edit: woop found schematics/service info https://www.doctsf.com/documents/schematheques/radio_anglais/PHILIPS/131U.PDF edit2: looks like it was a 33nf cap across the mains for RF filtering, and those aint critical to operation so ill go ahead with testing On 23/02/2021 at 14:57, LightBulbFun said: 8 Sodding years, but thanks to some help from @R1152 (details of which can be found in the @beko1987-shite thread) I finally managed to figure out how to get the Chassis out of the case Woo! now I can have a proper stab at getting it working again hopefully Yoss, Leyland Worldmaster and Cord Fourteener 3 Link to comment Share on other sites More sharing options...
Floatylight Posted March 28, 2021 Share Posted March 28, 2021 MrsFL's Mazda 3 has been making many clonks of late, a brief inspection led to this finding but also that rear shock bump stops have disintegrated as have trailing arm bushings. Looking at Autodoc are any makes that should be looked at / avoided for suspension components?? Link to comment Share on other sites More sharing options...
Leyland Worldmaster Posted March 28, 2021 Share Posted March 28, 2021 (edited) 1 hour ago, Tim_E said: Looks like the sort of thing @LightBulbFun would be doing too! Ha! 😂 Yes, I'm looking forward to an AS Meet, actually ! The Power Valves are New Old Stock to Russian Military Specification. They are designed for use in Fighter Jet Missile Door Control Circuits. Being Valves, the EMP produced by a Nuclear Weapon won't affect them. They're being used in peaceful* activities now, but I think it's cool to have kit with a story like that! 😎😎😎 Edited March 28, 2021 by Leyland Worldmaster Picture added! louiepj, LightBulbFun, mercedade and 5 others 8 Link to comment Share on other sites More sharing options...
richardmorris Posted March 28, 2021 Share Posted March 28, 2021 a Link to the car sos x1/9 program. Barry Cade 1 Link to comment Share on other sites More sharing options...
mitsisigma01 Posted March 28, 2021 Share Posted March 28, 2021 2 hours ago, Floatylight said: brief inspection led to this finding An uncooked sausage 😉 Twiggy, Three Speed, Floatylight and 1 other 4 Link to comment Share on other sites More sharing options...
richardmorris Posted March 28, 2021 Share Posted March 28, 2021 1 hour ago, mitsisigma01 said: An uncooked sausage 😉 I thought it looked like a petrified dog turd. Of course youngsters won’t have been subject to the delights* of white dog poo. andyberg, Three Speed, Twiggy and 1 other 4 Link to comment Share on other sites More sharing options...
stuboy Posted March 28, 2021 Share Posted March 28, 2021 Busy weekend, used the galaxy to fetch some paving slabs, and then today electric running machine for the missus made realised I've not cleaned the in side for ages, so whilst missus and her brother layed the slabs in the garden I gave the inside a hoover and a wiper over, such nicer place to be in, then today using the mondeo I noticed more stones than a gravel pit in the drivers footwear so that got a hoovering out too..oh and I put up another dam blind. Cord Fourteener and dome 2 Link to comment Share on other sites More sharing options...
beko1987 Posted March 28, 2021 Share Posted March 28, 2021 28 minutes ago, stuboy said: Busy weekend, used the galaxy to fetch some paving slabs, and then today electric running machine for the missus made realised I've not cleaned the in side for ages, so whilst missus and her brother layed the slabs in the garden I gave the inside a hoover and a wiper over, such nicer place to be in, then today using the mondeo I noticed more stones than a gravel pit in the drivers footwear so that got a hoovering out too..oh and I put up another dam blind. Looks like she's practising for when the "patio needs relaying"... NorfolkNWeigh and holbeck 2 Link to comment Share on other sites More sharing options...
stuboy Posted March 28, 2021 Share Posted March 28, 2021 13 hours ago, beko1987 said: Looks like she's practising for when the "patio needs relaying"... its only for the wheelie bins to sit on rather than landscaped.. Link to comment Share on other sites More sharing options...
NorfolkNWeigh Posted March 28, 2021 Share Posted March 28, 2021 Never upset a woman that can use a spade and lay slabs , ask Mr Jordache beko1987, stonedagain, Jerzy Woking and 2 others 1 4 Link to comment Share on other sites More sharing options...
MarvinsMom Posted March 28, 2021 Share Posted March 28, 2021 today we gave up one of the garages where one of the broken smol cars has been kept. i pushed one broke car out of the other garage on the same block that we still, well for now anyway, have. then kerry pushed the evicted car out, and across, and into the now vacant garage. the broken mini was then hooked up to the back of the Rover, and it was dragged back to Kerrys. once there, we popped the plugsout,and gave them a clean, before kerry took the cap off the dizzy. turning over the engine, well there is no spark at the plugs, though kerry says she did see a spark at the points. so,i think i'm going to get another coil first, and then maybe a new rotor arm, cap and, ifi feel flush maybe even some plugs and leads. then it was cover on, its FAR to big, hell it was big on Marvin the Metro and away home. but i am now sure, i want to get it running and then its going . i know i won't ever be able to have another mini 1000, but, frankly this sums np what i think of it (and the other broken smol cars) Amishtat and Tadhg Tiogar 2 Link to comment Share on other sites More sharing options...
SiC Posted March 28, 2021 Share Posted March 28, 2021 I wish Minis weren't so expensive. I'd really like one but not for the high four figures they go for. Especially as they're high liability in the rusty bodywork stakes. I remember looking over your black one when you took it to the Leyland day at Gaydon. Looked like a lovely little thing. MarvinsMom 1 Link to comment Share on other sites More sharing options...
SiC Posted March 28, 2021 Share Posted March 28, 2021 Found a picture I took. 7th Jul 2019. Nearly two years ago now! LightBulbFun, Split_Pin, mercedade and 6 others 9 Link to comment Share on other sites More sharing options...
HMC Posted March 28, 2021 Share Posted March 28, 2021 13 hours ago, Jenson Velcro said: Seeing this picture of a pub in Tavistock, makes me want to ask if the Ordulph Arms is still going? I worked in Tavi for 3 years in the mid 90s and lunches were often spent in the Ordulph as it made the afternoons pass in somewhat of a blur. The landlord had a Lotus Elan and a Lotus Carlton which he seemed to use as his daily. I remember briefly ( for about 400 yds) following him across the moors. Bloody hell it was rapid. It was still going until a couple of years ago, the landlord used to have a DB7 in the 00’s so possibly the same owner as was then. Jenson Velcro 1 Link to comment Share on other sites More sharing options...
Parky Posted March 28, 2021 Share Posted March 28, 2021 Failed my first financial paper. Reason? I referred to a test case client as “wanting to invest money gifted to them from their late grandfather” Failed because I didn’t say the word “inheritance” Funny old system. You have failed. Unless you correct the thing you failed on. In which case you have passed. I wonder why they don’t just say “hey, alter that and resubmit and we’re good” In the final stages now. Another day or two and that should be it GrumpiusMaximus, Cord Fourteener, dome and 6 others 9 Link to comment Share on other sites More sharing options...
Tadhg Tiogar Posted March 29, 2021 Share Posted March 29, 2021 13 minutes ago, Parky said: Failed my first financial paper. Reason? I referred to a test case client as “wanting to invest money gifted to them from their late grandfather” Failed because I didn’t say the word “inheritance”... What if it was a gift given before the late grandfather's death? That wouldn't be an inheritance, so much as a potentially exempt transfer (albeit NZ may not have the PET loophole).... Link to comment Share on other sites More sharing options...
Parky Posted March 29, 2021 Share Posted March 29, 2021 1 hour ago, Tadhg Tiogar said: What if it was a gift given before the late grandfather's death? That wouldn't be an inheritance, so much as a potentially exempt transfer (albeit NZ may not have the PET loophole).... Ha ha! Could have pulled that but the text did state inheritance from grandfather, I just didn’t call it that. Rather like referring to “Pension” instead of “New Zealand Superannuation”. It means the same. Or claiming “WCPGW?” instead of “the value of investments can go down as well as up and you may not get back the amount invested” Cord Fourteener 1 Link to comment Share on other sites More sharing options...
Austat Posted March 29, 2021 Share Posted March 29, 2021 Got chatting with a bloke at a local garage of mine who has this lovely Monza Red RS2000 which I last saw around two years ago. I forgot to get a photo of it last time I saw it and regretted it, so it was good to see it again. He looks like he's in his late 50's, and said he's had it since he was 18, so perhaps a one owner car! He plans a restoration for it in the future. Split_Pin, danthecapriman, Skizzer and 6 others 9 Link to comment Share on other sites More sharing options...
Parky Posted March 29, 2021 Share Posted March 29, 2021 I have a collection to do tomorrow.... DVee8, BL Bloke, Austat and 8 others 11 Link to comment Share on other sites More sharing options...
tommotech Posted March 29, 2021 Share Posted March 29, 2021 Over the weekend I helped my brother fit brake discs & pads to his Audi TT, he procured the parts through Autodoc and went for the RIDEX brand. I was a little dubious as I had no experience of RIDEX and they always come out less expensive than any other brand there. I did try to find out who they are associated with but they appear to be independent, according to their website. That said I was pleasantly surprised, finish was good on the discs, the pads had the usual excessive paint / powder coat that needs filing to get them to fit nicely in the caliper but that's no worse than Eicher or Apex stuff that I've had from the local motor factor. Time will tell but I would be interested to hear of any other experiences with RIDEX, if there are any. Jim Bell 1 Link to comment Share on other sites More sharing options...
brownnova Posted March 29, 2021 Share Posted March 29, 2021 Doing some clearing of a corner in my garden... what’s that big metal thing in the undergrowth... Road sign.... Standard. BorniteIdentity, Tickman, BL Bloke and 9 others 8 4 Link to comment Share on other sites More sharing options...
Floatylight Posted March 29, 2021 Share Posted March 29, 2021 1 hour ago, tommotech said: Over the weekend I helped my brother fit brake discs & pads to his Audi TT, he procured the parts through Autodoc and went for the RIDEX brand. I was a little dubious as I had no experience of RIDEX and they always come out less expensive than any other brand there. I did try to find out who they are associated with but they appear to be independent, according to their website. That said I was pleasantly surprised, finish was good on the discs, the pads had the usual excessive paint / powder coat that needs filing to get them to fit nicely in the caliper but that's no worse than Eicher or Apex stuff that I've had from the local motor factor. Time will tell but I would be interested to hear of any other experiences with RIDEX, if there are any. Thank you, just ordered springs, shock, bump stops and full rear subframe bush kit for under £100... Link to comment Share on other sites More sharing options...
Cord Fourteener Posted March 29, 2021 Share Posted March 29, 2021 I somehow managed to open a Wikipedia article on Eliliana Torrini in Scots. And it turns out she is Italian-Icelandic, just for more linguistic fun. Link to comment Share on other sites More sharing options...
Cord Fourteener Posted March 29, 2021 Share Posted March 29, 2021 Probably old news now but Sabine Schmitz died of cancer earlier this month. I believe she went down fighting, there's a heart-warming video of her last public message, in German but she seemed strong to the last. She is responsible for one of the best pieces of Top Gear footage and one of the best pieces of driving catptured on film in general, in my opinion: dome and RayMK 2 Link to comment Share on other sites More sharing options...
brownnova Posted March 29, 2021 Share Posted March 29, 2021 Very first person to knock on my new front door (fitted today) was a <gentleman with an Irish accent> trying to buy my Saab 900... “I’ll do you a favour and give you £100 for it today and take it off your hands” Funnily enough I don’t find that much of a favour.... richardmorris, BL Bloke, BorniteIdentity and 6 others 9 Link to comment Share on other sites More sharing options...
Tadhg Tiogar Posted March 29, 2021 Share Posted March 29, 2021 Just now, brownnova said: Very first person to knock on my new front door (fitted today) was a pikey trying to buy my Saab 900... “I’ll do you a favour and give you £100 for it today and take it off your hands”.... In a way, you're lucky the fella offered £100. Half the time, they just take without paying. Cord Fourteener 1 Link to comment Share on other sites More sharing options...
richardmorris Posted March 29, 2021 Share Posted March 29, 2021 Strange glowing orb in sky. Cord Fourteener, Twiggy and GrumpiusMaximus 1 2 Link to comment Share on other sites More sharing options...
Floatylight Posted March 29, 2021 Share Posted March 29, 2021 1 hour ago, brownnova said: Very first person to knock on my new front door (fitted today) was a pikey trying to buy my Saab 900... “I’ll do you a favour and give you £100 for it today and take it off your hands” Funnily enough I don’t find that much of a favour.... £200 and half a packet of Hobnobs brownnova and Cord Fourteener 2 Link to comment Share on other sites More sharing options...
Zelandeth Posted March 29, 2021 Share Posted March 29, 2021 4 hours ago, Tim_E said: I somehow managed to open a Wikipedia article on Eliliana Torrini in Scots. And it turns out she is Italian-Icelandic, just for more linguistic fun. Stop making me even more homesick than I already am... That basically sounds in my head like any of the regulars in any of the pubs I grew up frequenting (with my parents obviously - well aside from one, which admittedly we did live next door to and I was friends with the kids of the landlord, so different rules applied there!) just chatting about anything... Cord Fourteener, Amishtat and M'coli 3 Link to comment Share on other sites More sharing options...
MikeR Posted March 29, 2021 Share Posted March 29, 2021 hopefully the focus is alright for another year , put it into the garage for a check over today , slight knock on the offside front which I thought was the track rod end , and its come back ok , on the car cam its had a good ragging around and a trip on the ramps and they think its ok .. so hopefully its a pass in April for it , fingers crossed ....... edit tre bollocks , just check my dates and I am a month out , its June its mot is due ...... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now