stuboy Posted November 14, 2020 Share Posted November 14, 2020 More cable ties to the rescue.. collegues lowered fiesta st rear bumper broken away snd flapping about... asked me to have a look... Cord Fourteener and spike60 2 Link to comment Share on other sites More sharing options...
brownnova Posted November 15, 2020 Share Posted November 15, 2020 17 hours ago, richardmorris said: Where’s the leak? Taking the rear bench out is a known and sneaky fix. It’s nit too bad a job to do the mounts with the repair panels now. My mechanic / welder friend did both sides in a couple of hours ( I took the wings off etc). Leak is up on the swan neck. As for the welding, it’s started to creep into the box section too, so might have to cut a little bit to get to solid metal. I’m hoping the whole box section doesn’t need doing, I think there’s a triangular repair panel which will cover the section I need, but I need to get poking with my screwdriver. Once it has an MoT again I can get some quotes for the work, I want it doing properly, and whilst I’m at at it I’ll see about getting three point seatbelts fitted. Then we can get to work on the tatty exterior. richardmorris, Cord Fourteener, LightBulbFun and 1 other 4 Link to comment Share on other sites More sharing options...
DVee8 Posted November 15, 2020 Share Posted November 15, 2020 With a little time on our hands we popped over to the garage the Daimler is in to check the levels, top the tyres up. I don't think she will be going out much over the next few months. I would like to get some paint work done to her over winter. Shirley Knott, Agila, holbeck and 25 others 28 Link to comment Share on other sites More sharing options...
richardmorris Posted November 15, 2020 Share Posted November 15, 2020 5 hours ago, brownnova said: Leak is up on the swan neck. As for the welding, it’s started to creep into the box section too, so might have to cut a little bit to get to solid metal. I’m hoping the whole box section doesn’t need doing, I think there’s a triangular repair panel which will cover the section I need, but I need to get poking with my screwdriver. Once it has an MoT again I can get some quotes for the work, I want it doing properly, and whilst I’m at at it I’ll see about getting three point seatbelts fitted. Then we can get to work on the tatty exterior. Not got a spare swan neck sorry. It is the bit that has rusted most on mine though - the muck is kicked up from the road and water collects there on the inside. My garage’s courtesy car had three point belts in the back. They had made a steel frame to fix the innertial reels to so that the belt was above the seat back. My reluctance to do this is why I have my sister’s 2cv and my nieces haven’t been in it. brownnova 1 Link to comment Share on other sites More sharing options...
SiC Posted November 15, 2020 Share Posted November 15, 2020 Some things are sent to try us More so when this is printed on the part egg, w00dy and mercedade 3 Link to comment Share on other sites More sharing options...
eifion Posted November 15, 2020 Share Posted November 15, 2020 My Peugeot 205 decided that it didn't want to start while I was out this morning. The earth terminal has this plasic screw-down thing that's been getting increasingly worn and today was the day it decided not to earth properly any more. All I had on me was a 10mm spanner but it turned out to be all I needed to act as a temporary connection to earth . I'll get it fixed properly before I go out in it again. CGSB, dollywobbler, BorniteIdentity and 5 others 8 Link to comment Share on other sites More sharing options...
richardmorris Posted November 15, 2020 Share Posted November 15, 2020 My dad has the x1/9 booked in for its mot tomorrow at the Citroen dealer where he has the ds4 done. Being in wales he can’t cross the border to the place that’s done it for the last 14years. He says it will be fine. I’m not so sure. It’s done 60miles since the last mot. What could possibly go wrong? Link to comment Share on other sites More sharing options...
KitKat Posted November 15, 2020 Share Posted November 15, 2020 1 hour ago, SiC said: Some things are sent to try us More so when this is printed on the part #BecauseClio 🤣🤣 SiC 1 Link to comment Share on other sites More sharing options...
Zelandeth Posted November 15, 2020 Share Posted November 15, 2020 So much for having plans to actually get stuff done today. Ended up in the loft all afternoon chasing a water ingress issue. Link to comment Share on other sites More sharing options...
brownnova Posted November 15, 2020 Share Posted November 15, 2020 2 hours ago, richardmorris said: Not got a spare swan neck sorry. It is the bit that has rusted most on mine though - the muck is kicked up from the road and water collects there on the inside. My garage’s courtesy car had three point belts in the back. They had made a steel frame to fix the innertial reels to so that the belt was above the seat back. My reluctance to do this is why I have my sister’s 2cv and my nieces haven’t been in it. I swapped the exhaust on the yellow 2CV last week and discovered the swan neck was holed too... so can’t even cannibalise that one! I’ll order one tomorrow from ECAS, need a few bits anyway. Ive seen steel frames, but the ones at the front are mounted onto a reinforced bit on the main shell, I’m wondering if that can be recreated on the front... if not I’ll shell out for the steel frame... Link to comment Share on other sites More sharing options...
richardmorris Posted November 15, 2020 Share Posted November 15, 2020 3 minutes ago, brownnova said: I swapped the exhaust on the yellow 2CV last week and discovered the swan neck was holed too... so can’t even cannibalise that one! I’ll order one tomorrow from ECAS, need a few bits anyway. Ive seen steel frames, but the ones at the front are mounted onto a reinforced bit on the main shell, I’m wondering if that can be recreated on the front... if not I’ll shell out for the steel frame... The main issue is that there isn’t a strong enough place to mount the top anchor on the back Of the car body. Link to comment Share on other sites More sharing options...
meshking Posted November 15, 2020 Share Posted November 15, 2020 17 minutes ago, richardmorris said: The main issue is that there isn’t a strong enough place to mount the top anchor on the back Of the car body. That's the reason I sold my 2cv and replaced it with a van. My kids would never travel in the back (well they did once and given they've never travelled in a car without belts, they were not keen) so it seemed pointless having a four seater. Link to comment Share on other sites More sharing options...
richardmorris Posted November 15, 2020 Share Posted November 15, 2020 1 minute ago, meshking said: That's the reason I sold my 2cv and replaced it with a van. My kids would never travel in the back (well they did once and given they've never travelled in a car without belts, they were not keen) so it seemed pointless having a four seater. When we were young my sister and I happily travelled over France etc in the back of dyanes with the lap belts. Times change. Well safety and perception of such change. Link to comment Share on other sites More sharing options...
brownnova Posted November 15, 2020 Share Posted November 15, 2020 38 minutes ago, richardmorris said: The main issue is that there isn’t a strong enough place to mount the top anchor on the back Of the car body. Ah ok, thanks, it did seem a little too simple. Was thinking just on the pillar like the front. But if it’s not strong enough that’s why I’ve never seen it done. I’ll revert to plan b... unless I find a suitable plan c! Any particular reason you’re against the frame in yours? Link to comment Share on other sites More sharing options...
brownnova Posted November 15, 2020 Share Posted November 15, 2020 15 minutes ago, richardmorris said: When we were young my sister and I happily travelled over France etc in the back of dyanes with the lap belts. Times change. Well safety and perception of such change. The 12 y.o. is fine with the lap belt, sadly it’s car seats for the baby which don’t fit.... Link to comment Share on other sites More sharing options...
dollywobbler Posted November 15, 2020 Share Posted November 15, 2020 I must concede I've not done anything about belts in the back of my 2CV yet. I did find the belts the other day! But I'm still not sure how happy I am about just lap belts. Not a problem this year as I have plenty of other cars, but I don't want them to miss out on 2CV stuff next year. Link to comment Share on other sites More sharing options...
wuvvum Posted November 16, 2020 Share Posted November 16, 2020 My faithful, if decrepit, "upstairs PC" died today. It's had a good innings - I bought it second hand 7 or 8 years ago, and it really is hopelessly slow nowadays, but it'd never gone wrong until today so I'd never got round to replacing it - although I did frequently swear at it when it would sit there for ages with the hard drive grinding away as the swap file struggled to make up the countless gigabytes of RAM that every website seems to take up these days. I think it's the PSU that's gone. I've found a replacement on eBay, but I've decided to bite the bullet and splash out on a newer PC. The logical thing to do would be to move the downstairs PC upstairs (downstairs PC is a lot newer and has a quad core CPU and Windows 10) and then just use my work laptop as the downstairs computer, with a proper keyboard / mouse / monitor plugged in, but that'd be far too sensible, plus I can't really use the work laptop to visit adult-interest websites. Got very little of any interest done on the cars this weekend because the weather was so crap. I found the source of water ingress on the Carina - it was getting past the lower door window seals - so I've run a strip of the narrow Gorilla tape along the bottom of the window which should hopefully stop the worst of it - then I ran an extension lead out and had a fan heater pointing at the carpet for a couple of hours to dry it out. I had the Rover 75 up on ramps to look for any obvious MOT fails, and found none apart from a couple of discoloured indicator bulbs. The height adjustment also doesn't work any more on the nearside headlight (I disconnected it as it was only working intermittently anyway) so that might get picked up on - it'll be new headlight time if it does. Then the Granvia went up on the ramps so I could have another play with the gearbox sensors - I pulled all the multiplugs off and gave them a good clean with contact cleaner, all except the main plug to the gearbox ECU which was full of some kind of grease (presumably a conductive kind). It hasn't made any difference - it still gets stuck in third gear. Although I took it out a few times earlier in the week and the 'box was behaving perfectly, for some reason. I'll do a fluid change as soon as it stays dry for long enough - next thing to look at after that will be the mph conversion chip for the speedo. I also noticed that the outer sill below the passenger door is looking rather bubbly - now that I can get to the inside of the outer sill, what with the inner sill having gone the way of all flesh, I'll try to give it a clean out and rustproof / underseal it so it doesn't dissolve completely over the winter. I have so far failed to find the source of the water ingress on the Renault 6. I cleared out the scuttle drains (the scuttle was full of water), but that doesn't seem to have stopped it - nor does spraying the seal rejuvenating shiz round the door seals. That does seem (touch wood) to have done the trick on the C2 though - the carpet in that has stayed reassuringly dry through the latest bout of shit weather. I really need to get the Renault indoors for the winter, although there seems to be a dearth of cheap garages at the minute and I can't afford an expensive garage. It's going to get a cover over it for now to keep the rain out, although I don't know how long that will last before some pisshead nicks it... clayts450, Coprolalia and Cord Fourteener 3 Link to comment Share on other sites More sharing options...
Cord Fourteener Posted November 16, 2020 Share Posted November 16, 2020 Wearing finest Gimp tyre, normal wheel in the boot taking up too much space, we have a date with the tyre shop. I thought I could get a plug repair, but having now seen the size of concrete deeply embedded in the tyre it's going to have to be a new tyre. I'm going to stoop low and go with the garage's suggestion of a budget tyre. Shame when the car came with nearly new Bridgestone all round. I bought the tyres and got a free car this summer! Jamie and juular 2 Link to comment Share on other sites More sharing options...
richardmorris Posted November 16, 2020 Share Posted November 16, 2020 Fiat has a pass. I was wrong about the mileage this year though - 28miles! That's £2 a mile just for the MOT fee! Tickman, LightBulbFun, Six-cylinder and 5 others 8 Link to comment Share on other sites More sharing options...
loserone Posted November 16, 2020 Share Posted November 16, 2020 That wouldn't get me to an MOT station and back! KitKat and richardmorris 2 Link to comment Share on other sites More sharing options...
clayts450 Posted November 16, 2020 Share Posted November 16, 2020 Just juggled the wheels on the Combo van ahead of a fitting of four Michelin Cross Climate+ tyres on Wednesday. I'd secured a spare set of Doblo steelies with half decent Michelins on for £50 on Friday, so have replaced the rear wheels with the excellent Toyo Nano Energy 3 on (7mm tread left, done 33K miles) with two of the Doblo steelies with Michelin Duragrip on (4mm of tread). This leaves me with a spare set of wheels for the van with those two Toyos and a couple of Michelin Efficient Grip with 6mm on. And what about this for a deal ? CC+ x 4 for the price of four mid-range tyres. F1 Autocentre online only, £22.60 off each tyre when you buy four. Bonkers dome and w00dy 2 Link to comment Share on other sites More sharing options...
davehedgehog31 Posted November 16, 2020 Share Posted November 16, 2020 @gm very kindly sent me a stereo surround for the 107. Finally fitted it properly today. Looks neat enough. Not a big fan of aftermarket head units normally but Bluetooth and a USB port for charging adds a fair bit of convenience. dome, Vince70 and gm 3 Link to comment Share on other sites More sharing options...
Cavcraft Posted November 16, 2020 Share Posted November 16, 2020 Handed my notice in about 25 minutes ago. Don't know how long I've got to do, hopefully not too long. Barry Cade, Lord Sterling, mercedade and 5 others 5 1 2 Link to comment Share on other sites More sharing options...
Saabnut Posted November 16, 2020 Share Posted November 16, 2020 14 minutes ago, Cavcraft said: Handed my notice in about 25 minutes ago. Don't know how long I've got to do, hopefully not too long. The work/hours you were doing for that pay rate, this is the sensible thing to do. More time to chase scooters...... Cavcraft 1 Link to comment Share on other sites More sharing options...
N19 Posted November 16, 2020 Share Posted November 16, 2020 Capri dash has been refitted, took it out today for a proper run as it hasn't had one in ages. Speedo seems to be sitting a bit lower and I reckon it's reading low by 10mph throughout. BorniteIdentity, Split_Pin, mercedade and 1 other 4 Link to comment Share on other sites More sharing options...
Cavcraft Posted November 16, 2020 Share Posted November 16, 2020 1 hour ago, Saabnut said: The work/hours you were doing for that pay rate, this is the sensible thing to do. More time to chase scooters...... Slight change of plan: Going part time in a couple of weeks, which is all I ever really wanted. richardmorris, brownnova, strangeangel and 8 others 11 Link to comment Share on other sites More sharing options...
richardmorris Posted November 16, 2020 Share Posted November 16, 2020 Surrey road cops posted this earlier. Lack of talent on the a3 near Guildford. anyone able to identify the car as it’s got us stumped at work. https://twitter.com/SurreyRoadCops/status/1328185361592430592?s=20 Link to comment Share on other sites More sharing options...
Zelandeth Posted November 16, 2020 Share Posted November 16, 2020 Hyundai coupe by the looks of it. richardmorris and adw1977 1 1 Link to comment Share on other sites More sharing options...
richardmorris Posted November 16, 2020 Share Posted November 16, 2020 27 minutes ago, Zelandeth said: Hyundai coupe by the looks of it. Thanks - the badge had me stumped. Link to comment Share on other sites More sharing options...
beko1987 Posted November 16, 2020 Share Posted November 16, 2020 5 hours ago, Cavcraft said: Handed my notice in about 25 minutes ago. Don't know how long I've got to do, hopefully not too long. You used to do that to yourself on a Thursday, take yourself out for a stern talking to and a few* drinks on the Friday then re employ and forgive yourself on Sunday afternoon... Should be used to it by now! Cavcraft and Saabnut 1 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now