N19 Posted November 4, 2020 Share Posted November 4, 2020 Capri clocks whipped out. A couple of the back lights are temperamental, and the circuit board connections are suspect in a couple of places, so going to give it a good clean up and any repairs or reflowing on the bench at home. Steviemillar, Lacquer Peel, RobT and 1 other 4 Link to comment Share on other sites More sharing options...
egg Posted November 4, 2020 Share Posted November 4, 2020 Love those simple 70's Ford dials. But it would be nice for a clearer marker for 30 mph - as it is the speed limit you most commonly have to 'check'. N19 and BorniteIdentity 2 Link to comment Share on other sites More sharing options...
Steviemillar Posted November 4, 2020 Share Posted November 4, 2020 2 hours ago, egg said: They went to Mull of Kintyre in that mini (from Kent) which more or less killed it (synchro had gone I think) That’s an impressive trek in a mini! My in laws used to drive their mini regularly between Dundee and Ipswich in the 70s/early 80s for holidays, usually in one go after my FIL came off nigh shift as he was in the Fire Service. My missus used to have to share the back seat of the Mini 1000 with the suitcase. Things did improve in the 80s though when FIL bought a 78 Russet Brown Clubman estate when it was three years old, suitcase was then moved to the load compartment. GrumpiusMaximus, egg, Essex V6 and 1 other 4 Link to comment Share on other sites More sharing options...
richardmorris Posted November 4, 2020 Share Posted November 4, 2020 End of a figaro in a hit n run on the a3 tonight. BL Bloke, barefoot and catsinthewelder 3 Link to comment Share on other sites More sharing options...
artdjones Posted November 4, 2020 Share Posted November 4, 2020 3 hours ago, egg said: today's pic from the archives, my mum's 850 Mini and my dad's first Escort outside their house, all very period! They went to Mull of Kintyre in that mini (from Kent) which more or less killed it (synchro had gone I think) My brothers went from South Wales to Scotland in 1988 in a 1.3 Marina estate,and had a 2 week camping trip.They put 3000 miles on it and it was mot tested immediately after returning. 18 separate faults, curtains for the Marina.It was only 10 years old. egg and GrumpiusMaximus 2 Link to comment Share on other sites More sharing options...
wuvvum Posted November 4, 2020 Share Posted November 4, 2020 Ran the Scudo to the scrapyard at lunchtime. It took a bit of starting and then I had to take one of the back wheels off to twat the drum with a mallet as the handbrake had stuck on, but once it was going it managed the 8 mile drive just fine despite its HGF. Also spotted this beauty parked up on the industrial estate. BL Bloke, Vantman, Jim Bell and 6 others 9 Link to comment Share on other sites More sharing options...
mitsisigma01 Posted November 5, 2020 Share Posted November 5, 2020 What's the poster in the osr window say? Link to comment Share on other sites More sharing options...
somewhatfoolish Posted November 5, 2020 Share Posted November 5, 2020 8 hours ago, dozeydustman said: They take these little ones to rural properties in twisty little narrow roads, many of which are private and the residents won't fill in the potholes or ruts. 6 years of going where a Unimog would struggle has taken its toll It's an HGV, surely it should be getting eyeballed regularly enough to spot that kind of thing before it does an impression of a dog being dragged to the vet for deknackering? Link to comment Share on other sites More sharing options...
Tadhg Tiogar Posted November 5, 2020 Share Posted November 5, 2020 1 hour ago, mitsisigma01 said: What's the poster in the osr window say? Looks like a reproduction period advert for the 164... wuvvum 1 Link to comment Share on other sites More sharing options...
dozeydustman Posted November 5, 2020 Share Posted November 5, 2020 3 hours ago, somewhatfoolish said: It's an HGV, surely it should be getting eyeballed regularly enough to spot that kind of thing before it does an impression of a dog being dragged to the vet for deknackering? Every 6 weeks. One of our fitters isn’t that good though and likes cable tie and gaffer tape repairs.... somewhatfoolish 1 Link to comment Share on other sites More sharing options...
Jim Bell Posted November 5, 2020 Share Posted November 5, 2020 On 11/4/2020 at 9:28 AM, dozeydustman said: Taken a truck to a crew that has broken down. IMG_3711.MOV 12.09 MB · 49 downloads just a little bit broken It's just one of those wagons with a steering wheel at both sides. dozeydustman 1 Link to comment Share on other sites More sharing options...
wuvvum Posted November 5, 2020 Share Posted November 5, 2020 9 hours ago, Tadhg Tiogar said: Looks like a reproduction period advert for the 164... Yep, that's what it was. Link to comment Share on other sites More sharing options...
N19 Posted November 5, 2020 Share Posted November 5, 2020 Just been poking around at the LEDs behind the Capri dash. I bought these and installed about a year / 3k miles ago... Hmm... All of them have gone this way. Not really what you want... Gone back to standard ones. Dash pod now illuminating beautifully on the bench! Perfect timing as the Mondeo fog lights arrived just as I finished that job! Link to comment Share on other sites More sharing options...
Tadhg Tiogar Posted November 5, 2020 Share Posted November 5, 2020 49 minutes ago, N19 said: Just been poking around at the LEDs behind the Capri dash. I bought these and installed about a year / 3k miles ago... Hmm... All of them have gone this way. Not really what you want... The current ones based on rectangular SMD / square COB LEDs are supposedly longer-lasting and better able to cope with constant changes in temperature. Link to comment Share on other sites More sharing options...
Stanky Posted November 5, 2020 Share Posted November 5, 2020 Today has been incredibly quiet work-wise, so I took 45 minutes to get the mercedes on the lift and deal with two serious issues. 1. Remove the co-op 'bag for life' that had become melted to the catalytic converter about 4 weeks ago and stunk when I came to a stop in traffic or in the work carpark. I had hoped it would melt and fall off, or wash off in the rain we've had recently but no such luck. Robust action with a wire brush and a craft knife removed almost all of the remaining melted bits. I was sort of tempted to take it back to the coop and exchange a handful of extremely melted, but still legible remains for a nice new bag, but decided that my karma for doing that would be to pick up a new melted-on bag within a week. 2. Removed a rear wheel to release the small pebble that had become wedged between the inner edge of the brake disc and the backing plate which made a horrific screeching noise, pitch increasing as you got faster until about 50mph when it became so high pitched I couldn't hear it any more, but probably set dogs off barking like mad as I drove past. It came out without any fuss, somehow having managed to become trapped in a recessed dimple in the backing plate so it couldn't come out by itself. Its worn lovely and smooth and flat on one side. Exciting stuff eh? I also noticed it badly needs a pressure wash in the arches to get the mud and grot out, and was able to look at the diff oil plugs. I've ordered a litre of 75w85 diff oil for that job which i hope might be here by the weekend. lesapandre, somewhatfoolish, Lacquer Peel and 7 others 6 4 Link to comment Share on other sites More sharing options...
Tadhg Tiogar Posted November 5, 2020 Share Posted November 5, 2020 8 minutes ago, Stanky said: Today has been incredibly quiet work-wise,..... Same here. The client I most want to speak to is currently keeping a very low profile. Link to comment Share on other sites More sharing options...
wuvvum Posted November 5, 2020 Share Posted November 5, 2020 4 hours ago, Tadhg Tiogar said: Same here. The client I most want to speak to is currently keeping a very low profile. In your line of work, might that not mean that they have shuffled off this mortal coil? Link to comment Share on other sites More sharing options...
Tadhg Tiogar Posted November 5, 2020 Share Posted November 5, 2020 Just now, wuvvum said: In your line of work, might that not mean that they have shuffled off this mortal coil? Entirely possible..... Link to comment Share on other sites More sharing options...
Vince70 Posted November 5, 2020 Share Posted November 5, 2020 Today I put the misses Ford Ka into hibernation till spring and gave it a wax and put a cover over it. It recently just passed its MOT with no advisory’s and the MOT tester thought he had gone back to 1998 as he hadn’t seen a rust free example before but It has only done 19000 so it’s not surprising I guess and the best £150 I’ve spent on a motor. I was thinking of drilling a couple of holes in the sills and filling them up with old engine oil to stop any rot but hopefully if it’s not going near any salt I think it should be ok. But now it’s upside down I should be able to check the underside at least. LightBulbFun, CGSB, mk2_craig and 14 others 17 Link to comment Share on other sites More sharing options...
SiC Posted November 5, 2020 Share Posted November 5, 2020 Someone had a bad day! https://www.instagram.com/p/CHNz2KPDNLc/ w00dy, BL Bloke and dome 3 Link to comment Share on other sites More sharing options...
egg Posted November 5, 2020 Share Posted November 5, 2020 36 minutes ago, Vince70 said: Today I put the misses Ford Ka into hibernation till spring and gave it a wax and put a cover over it. I harbour a little fantasy of finding the earliest Ka left and keeping it mint. Preferably a base model (even though no PAS on early ones) - apparently Richard Porter had one as his first car cos the reviewers said the non-PAS car handled better. Vince70 1 Link to comment Share on other sites More sharing options...
cobblers Posted November 5, 2020 Share Posted November 5, 2020 This got delivered today. 310bhp. I did one lap of the business park in it. Fucking terrifying. Absolutely no idea what I'm going to do with it. LightBulbFun, HairySteve, HMC and 25 others 27 1 Link to comment Share on other sites More sharing options...
loserone Posted November 5, 2020 Share Posted November 5, 2020 you can't just give us one picture, we need a whole thread and ideally a test drive video. Hell, I'd even film it myself it needed cobblers and LightBulbFun 2 Link to comment Share on other sites More sharing options...
cobblers Posted November 5, 2020 Share Posted November 5, 2020 I need to get it insured first! The first two places I phoned had seen it on youtube, so they respectfully declined LightBulbFun, wuvvum, The Moog and 3 others 6 Link to comment Share on other sites More sharing options...
cort16 Posted November 5, 2020 Share Posted November 5, 2020 11 minutes ago, cobblers said: This got delivered today. 310bhp. I did one lap of the business park in it. Fucking terrifying. Absolutely no idea what I'm going to do with it. Is that the darksides developments one? Did you win the raffle? If so, well done! Link to comment Share on other sites More sharing options...
cobblers Posted November 5, 2020 Share Posted November 5, 2020 Yes, and yes! mk2_craig, w00dy, nacho man and 4 others 7 Link to comment Share on other sites More sharing options...
cort16 Posted November 5, 2020 Share Posted November 5, 2020 2 minutes ago, cobblers said: Yes, and yes! Bloody hell, great stuff. I watched their youtube video on it a while back it's absolutely mental. Is it still like a race car inside? Link to comment Share on other sites More sharing options...
doug Posted November 5, 2020 Share Posted November 5, 2020 2006 Reliant kangoo £400 Spair or repair run on gas aswell .new starter alternator van will run and drive but loud tapping from top end .contact mark [hidden information] https://www.facebook.com/marketplace/item/1077208262725353 somewhatfoolish 1 Link to comment Share on other sites More sharing options...
dave j Posted November 5, 2020 Share Posted November 5, 2020 39 minutes ago, cobblers said: This got delivered today. 310bhp. I did one lap of the business park in it. Fucking terrifying. Absolutely no idea what I'm going to do with it. Wow! Nice one Cobblers. I didn't get a ticket but it looks like a real weapon! Link to comment Share on other sites More sharing options...
vulgalour Posted November 5, 2020 Share Posted November 5, 2020 My print/scanner combo has decided it doesn't want to talk to my computer any more, which means I've got a couple of unfinished traditional automotive art pieces there's not much point in me finishing until I replace the thing, or get it talking again. Tried all the usual updates with drivers etc. and while the computer can see the device, and the device can see the computer, they're not on speaking terms and we can't figure out why. Never mind, I've been wanting to replace it with a laser printer and a separate flatbed scanner for a while so this is as good an excuse as any. That means I've been trying to get better at digital automotive artwork and I've been picking away at this Fury, getting stumped for a wheel choice until finding this excellent photo in the reference folder which might originally have been posted by someone on here, I'm not sure. No idea what the wheel is, I just know it works for what I'm creating and seemed to be a fairly popular style for American stuff in Australia. Supernaut, Austat and RobT 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now