N19 Posted April 4, 2020 Share Posted April 4, 2020 Today I incremented the counter of "skeptical people who asked for a jump start, looked amazed when I brought this around and then doubly amazed that it worked"... LightBulbFun, Tickman, strangeangel and 10 others 13 Link to comment Share on other sites More sharing options...
mitsisigma01 Posted April 5, 2020 Share Posted April 5, 2020 4 hours ago, stuboy said: gives?? Still none the wiser.... Full set... ? Only TimE has the answer.... Cord Fourteener 1 Link to comment Share on other sites More sharing options...
beko1987 Posted April 5, 2020 Share Posted April 5, 2020 10 hours ago, stuboy said: Had a look in door loom only 2 split wires so crimp in some extra wires. Still cant get remote to work for central locking, ( following YouTube instructions) Its done a vauxhall! A quick repair will snap again, I ended up chopping the entire loom back to inside the car and ran new wires. Can't tell you how long that will last as the car got scraped 5 months after... Link to comment Share on other sites More sharing options...
Cord Fourteener Posted April 5, 2020 Share Posted April 5, 2020 11 hours ago, stuboy said: gives?? Sorry, typo. Hinges. I found hinges. I was obviously too excited to proof-read my post! paulplom 1 Link to comment Share on other sites More sharing options...
Cord Fourteener Posted April 5, 2020 Share Posted April 5, 2020 7 hours ago, mitsisigma01 said: Still none the wiser.... Full set... ? Only TimE has the answer.... Typo, obviously I was too excited to proof-read my post. The excitement is high, BMW quoted me about £450 fitted for this. Link to comment Share on other sites More sharing options...
Mat.T Posted April 5, 2020 Share Posted April 5, 2020 As I have no access to any of my interesting cars due to the lock down I've been tackling jobs on the boring moderns. Finally, got round to doing the cam belt and water pump on my wifes Peugeot 308. Car has done 76k and coming up to 11 years old, Peugeot say 96k for a belt change or 10 years. The belt was just starting to crack and the water pump was showing signs of a slight weep. Also gave it an oil and filter change. Cam belt isnt to bad to do there is enough room to access things once I'd removed a large pile of plastic from the car egg, Shirley Knott, Split_Pin and 4 others 7 Link to comment Share on other sites More sharing options...
stuboy Posted April 5, 2020 Share Posted April 5, 2020 My mums 70th can only put card through the door so came home... bored so thought I'd get on with exhaust project.. Missus says gloves are need of going into the bin Cavcraft, Shirley Knott, stonedagain and 2 others 4 1 Link to comment Share on other sites More sharing options...
reb Posted April 5, 2020 Share Posted April 5, 2020 I was going to go to the workshop today and finish off that bike, but it's got a bit more in depth than anticipated, so i need to step back and regroup I think. Also, it's fucking Sunday! Cord Fourteener, Burnside and egg 3 Link to comment Share on other sites More sharing options...
stuboy Posted April 5, 2020 Share Posted April 5, 2020 Love a flap wheel to hide sins... Coat of heat paint, couple slices to make it clampable. HillmanImp, Burnside, Skizzer and 2 others 5 Link to comment Share on other sites More sharing options...
Split_Pin Posted April 5, 2020 Share Posted April 5, 2020 I applied some Renovo to the Audi's hood today, it came up well I think. dome, Dannyk, Shirley Knott and 18 others 21 Link to comment Share on other sites More sharing options...
paulplom Posted April 5, 2020 Share Posted April 5, 2020 Anyone know anything about fridges? I've just opened mine and it stinks of basil.I think it might be fawlty.Sent from my SM-G975F using Tapatalk Craig the Princess, MorrisItalSLX, gm and 6 others 1 8 Link to comment Share on other sites More sharing options...
Agila Posted April 5, 2020 Share Posted April 5, 2020 (edited) 8 minutes ago, paulplom said: Anyone know anything about fridges? I've just opened mine and it stinks of basil. I think it might be fawlty. Sent from my SM-G975F using Tapatalk I'd have a look in the Manuel. Forget that, the instructions are all in Spanish. Edited April 5, 2020 by Agila Looked in Manuel paulplom, S2000, Shirley Knott and 10 others 5 8 Link to comment Share on other sites More sharing options...
doug Posted April 5, 2020 Share Posted April 5, 2020 Painted the garage floor. The light switch is on the back wall, can't switch it off till the paint dries. Thunked that out well.Sent from my SM-J330FN using Tapatalk Burnside, Shirley Knott, Agila and 4 others 3 4 Link to comment Share on other sites More sharing options...
doug Posted April 5, 2020 Share Posted April 5, 2020 Turn your screen sideways to view above post.Sent from my SM-J330FN using Tapatalk Link to comment Share on other sites More sharing options...
HillmanImp Posted April 5, 2020 Share Posted April 5, 2020 *SHOCK NEWS**HOLD THE PRESS* H. IMP DOES ACTUAL CAR WORK. I know, mental, yeah! People probably forget I used to sometimes do stuff to my cars (quite often wrongly as people on these pages often pointed out) and I'm not just here to shitpost. The 944 has had rusty wings since before I got it. Obviously it was going to be the first thing I did when I got the car. So here we are 15 months later and they're still not done. If anyone remembers I have tried to buy proper repair panels but they were fucking shite so I sent them back. So today I decided to try and sort one of the shitty wings. Didn't start well with me breaking the side repeater trying to get to the bolts down the door frame. However after an hour or so the wing was off. Helpfully the awkward one to get to next to the light wasn't there. Reckon thats a bumper off job so hell, thats fine with me. Sadly things didn't get better after breaking the indicator. The wing was pretty rotten. This is how much I had to cut out. Was at it for a few hours, including beer breaks. Until this happened. Will try and sort it tomorrow but probably need a new liner. It had been a little temperamental for a few minutes before but went full on bollocked in no time, so I may be able to blag it for a bit. I've no idea if Machine Mart are open, I'll check in the morning unless anyone else knows? Sure theres an emergency plastic liner somewhere in the garage though, will look. It was already getting late though so I sacked it off for the day. Wing currently looks like this. Its a well fucking awkward bit of metal. Lots of curves and angles. I reckon the chances of it being the right size afterwards are pretty much zero. I was constantly measuring the wing on the other side but its equally as fucked so I was guessing where the end of what I was measuring was. Hopefully it will be close enough though. It can be metal and filler, thats fine. Will probably still be better than the £230 or whatever it was I'd paid for those other repair panels. Tickman, Angrydicky, paulplom and 13 others 16 Link to comment Share on other sites More sharing options...
LightBulbFun Posted April 5, 2020 Share Posted April 5, 2020 47 minutes ago, doug said: Turn your screen sideways to view above post. Sent from my SM-J330FN using Tapatalk ah much better Shirley Knott, Agila, HillmanImp and 4 others 2 5 Link to comment Share on other sites More sharing options...
Cavcraft Posted April 5, 2020 Share Posted April 5, 2020 I've just accidentally* distance bought a funky moped from Wuvvum's neck of the woods wuvvum, strangeangel, BorniteIdentity and 1 other 4 Link to comment Share on other sites More sharing options...
stuboy Posted April 5, 2020 Share Posted April 5, 2020 18 minutes ago, HillmanImp said: *SHOCK NEWS**HOLD THE PRESS* H. IMP DOES ACTUAL CAR WORK. I know, mental, yeah! People probably forget I used to sometimes do stuff to my cars (quite often wrongly as people on these pages often pointed out) and I'm not just here to shitpost. The 944 has had rusty wings since before I got it. Obviously it was going to be the first thing I did when I got the car. So here we are 15 months later and they're still not done. If anyone remembers I have tried to buy proper repair panels but they were fucking shite so I sent them back. So today I decided to try and sort one of the shitty wings. Didn't start well with me breaking the side repeater trying to get to the bolts down the door frame. However after an hour or so the wing was off. Helpfully the awkward one to get to next to the light wasn't there. Reckon thats a bumper off job so hell, thats fine with me. Sadly things didn't get better after breaking the indicator. The wing was pretty rotten. This is how much I had to cut out. Was at it for a few hours, including beer breaks. Until this happened. Will try and sort it tomorrow but probably need a new liner. It had been a little temperamental for a few minutes before but went full on bollocked in no time, so I may be able to blag it for a bit. I've no idea if Machine Mart are open, I'll check in the morning unless anyone else knows? Sure theres an emergency plastic liner somewhere in the garage though, will look. It was already getting late though so I sacked it off for the day. Wing currently looks like this. Its a well fucking awkward bit of metal. Lots of curves and angles. I reckon the chances of it being the right size afterwards are pretty much zero. I was constantly measuring the wing on the other side but its equally as fucked so I was guessing where the end of what I was measuring was. Hopefully it will be close enough though. It can be metal and filler, thats fine. Will probably still be better than the £230 or whatever it was I'd paid for those other repair panels. someone else playing with the sparkly stick HillmanImp 1 Link to comment Share on other sites More sharing options...
Amishtat Posted April 5, 2020 Share Posted April 5, 2020 Took advantage of the weather to get the 164 out into the light now I'd got a reasonable set of tyres and a fresh battery for it. With that done I tried a circuit of the village, 3 miles and my first actual drive in it. Having been idling fine on the driveway, of course it ran like a horse's arse as soon as I reached the halfway point and spewed out of the overflow once I got home. Topped it up once it had cooled down and put it back in the shed for now. Photo definitely flatters the old thing. Joey spud, LightBulbFun, NorfolkNWeigh and 22 others 25 Link to comment Share on other sites More sharing options...
Cord Fourteener Posted April 5, 2020 Share Posted April 5, 2020 2 hours ago, HillmanImp said: *SHOCK NEWS**HOLD THE PRESS* H. IMP DOES ACTUAL CAR WORK. I know, mental, yeah! People probably forget I used to sometimes do stuff to my cars (quite often wrongly as people on these pages often pointed out) and I'm not just here to shitpost. The 944 has had rusty wings since before I got it. Obviously it was going to be the first thing I did when I got the car. So here we are 15 months later and they're still not done. If anyone remembers I have tried to buy proper repair panels but they were fucking shite so I sent them back. So today I decided to try and sort one of the shitty wings. Didn't start well with me breaking the side repeater trying to get to the bolts down the door frame. However after an hour or so the wing was off. Helpfully the awkward one to get to next to the light wasn't there. Reckon thats a bumper off job so hell, thats fine with me. Sadly things didn't get better after breaking the indicator. The wing was pretty rotten. This is how much I had to cut out. Was at it for a few hours, including beer breaks. Until this happened. Will try and sort it tomorrow but probably need a new liner. It had been a little temperamental for a few minutes before but went full on bollocked in no time, so I may be able to blag it for a bit. I've no idea if Machine Mart are open, I'll check in the morning unless anyone else knows? Sure theres an emergency plastic liner somewhere in the garage though, will look. It was already getting late though so I sacked it off for the day. Wing currently looks like this. Its a well fucking awkward bit of metal. Lots of curves and angles. I reckon the chances of it being the right size afterwards are pretty much zero. I was constantly measuring the wing on the other side but its equally as fucked so I was guessing where the end of what I was measuring was. Hopefully it will be close enough though. It can be metal and filler, thats fine. Will probably still be better than the £230 or whatever it was I'd paid for those other repair panels. I've recently noticed more rot on the front inner wing that I'd thought, which isn't what I'd hoped for. I've welded twice in my life, once as a lesson and then once trying to save my touring bicycle half way across France (in Dijon, probably half way between Brighton and Milan?). I was pretty terrible but I have become curious about trying again. Stevebrookman, Cavcraft and HillmanImp 3 Link to comment Share on other sites More sharing options...
wuvvum Posted April 6, 2020 Share Posted April 6, 2020 I have been half thinking about getting another welder since my last one packed up through lack of use. I've welded in anger twice in my life - once to weld a side stand onto the Spacy, and once to weld the Innocenti's outer door skin back onto the frame - both are still holding up several years later, so either I'm not completely shit at it or it was complete beginner's luck. I'm going to have plenty of time to practice for the foreseeable though... Split_Pin, Cavcraft and Stevebrookman 3 Link to comment Share on other sites More sharing options...
wuvvum Posted April 6, 2020 Share Posted April 6, 2020 Not got much fettling done this weekend, for obvious reasons, but as it was a fairly warm day I did fire up various members of the fleet to test the aircon - this is the first time in a long while that it's been warm enough for A/C to really be noticeable. The only two cars where pressing the A/C button made any discernible difference were the Sonata and the Mondeo. The Sonata's aircon is brilliant, proper ice cold. Shame the rest of the car is fucked. The Mondeo's isn't quite as good but it still has a noticeable cooling effect. The V70's and the Rover 45's made no difference whatsoever. They could just need a regas m8 (like the CX) or they could be knackered - I have no idea. I was also reminded that once we're allowed out to play again I need to have another attempt at doing the aircon belt on the 75 - not a job I'm relishing. I drove the Tempra to Tesco and decided to risk opening the sunroof. Fortunately it works fine. Also for the first time since I've owned it I didn't get any fanbelt squeal at all - maybe the warmer weather has made it SFTU. The power steering is still losing fluid at a rate of knots though - I've ordered a bottle of Lucas leak fix stuff, one of the few snake oils which actually seems to work, so I'm hopeful that'll sort it. Burnside, paulplom, Split_Pin and 2 others 5 Link to comment Share on other sites More sharing options...
brownnova Posted April 6, 2020 Share Posted April 6, 2020 Yesterday I attempted to widen my driveway to provide parking area for the camper. Being lockdown I didn’t have the materials I needed (Wickes we’re out of stock for delivery), so I tried to use whatever I have lying round. Lesson learnt: wait for the proper materials. I’ve now just made a mess to be honest. Cord Fourteener and BorniteIdentity 2 Link to comment Share on other sites More sharing options...
paulplom Posted April 6, 2020 Share Posted April 6, 2020 Going to old house (half a mile away) to collect the saab. I need my strimmer out of the boot. It hasn't been started for 4 weeks or so since we got back together and fingers crossed it should be painless.This and the bini could be up for a swap for an s/v70.Sent from my SM-G975F using Tapatalk Link to comment Share on other sites More sharing options...
paulplom Posted April 6, 2020 Share Posted April 6, 2020 Started 1st click. Flat tyre though.Sent from my SM-G975F using Tapatalk Link to comment Share on other sites More sharing options...
anonymous user Posted April 6, 2020 Share Posted April 6, 2020 Y tho 95 quid Peugeot, Semi-C, paulplom and 2 others 3 2 Link to comment Share on other sites More sharing options...
adw1977 Posted April 6, 2020 Share Posted April 6, 2020 Looks like 20 reg cars may be a bit of a rarity. BBC News - Coronavirus: New UK car registrations plunge by more than 40%https://www.bbc.co.uk/news/business-52176669 Link to comment Share on other sites More sharing options...
Tadhg Tiogar Posted April 6, 2020 Share Posted April 6, 2020 49 minutes ago, adw1977 said: Looks like 20 reg cars may be a bit of a rarity. BBC News - Coronavirus: New UK car registrations plunge by more than 40%https://www.bbc.co.uk/news/business-52176669 I seem to remember that there was a similar famine in 89/90, so G-prefix cars were also comparatively thin on the ground. Link to comment Share on other sites More sharing options...
mitsisigma01 Posted April 6, 2020 Share Posted April 6, 2020 5 hours ago, brownnova said: Yesterday I attempted to widen my driveway to provide parking area for the camper. Being lockdown I didn’t have the materials I needed (Wickes we’re out of stock for delivery), so I tried to use whatever I have lying round. Lesson learnt: wait for the proper materials. I’ve now just made a mess to be honest. Show us the mess ? Cavcraft 1 Link to comment Share on other sites More sharing options...
egg Posted April 6, 2020 Share Posted April 6, 2020 Back in August, I asked on one of the French Renault 16 groups whether anyone actually had original air conditioning on a TX that functioned, at last I had a reply (in French timescales!) Here it is, and the air comes out at 11 degrees C. Damn I'd like one so equipped. RobT, Skizzer, artdjones and 4 others 7 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now