scaryoldcortina Posted March 10, 2019 Share Posted March 10, 2019 Yep,So is it playing ball this year? Also, did you find my torch? Link to comment Share on other sites More sharing options...
DVee8 Posted March 10, 2019 Share Posted March 10, 2019 So is it playing ball this year? Also, did you find my torch?Your torch is still where you left it,still on the front seat.. It still has some problems,timing is still a little out and the carbs require setting. scaryoldcortina 1 Link to comment Share on other sites More sharing options...
vulgalour Posted March 10, 2019 Share Posted March 10, 2019 Mike had time to lend a hand. Even with a scaffold bar, me on the footbrake, and all Mike's strength neither front hub nut will budge. They're both FAR too tight. Going to see if a local garage can get them off with the big gun and then retorqued to the correct setting so we can do the wheel bearing and CV boot replacement at home. They're on that tight that with me on the foot brake and all Mike's strength on the scaffold bar you can hear the brakes beginning to let go. Someone has dogged these up WAY too tight. Christine 1 Link to comment Share on other sites More sharing options...
red5 Posted March 10, 2019 Share Posted March 10, 2019 Yep, And me. If I help with the SU's ? Link to comment Share on other sites More sharing options...
DVee8 Posted March 10, 2019 Share Posted March 10, 2019 And me. If I help with the SU's ? Well your only 224 miles away,so if you are prepared to travel you can have a drive. :grinning-smiley-043: Link to comment Share on other sites More sharing options...
dollywobbler Posted March 10, 2019 Share Posted March 10, 2019 Mike had time to lend a hand. Even with a scaffold bar, me on the footbrake, and all Mike's strength neither front hub nut will budge. They're both FAR too tight. Going to see if a local garage can get them off with the big gun and then retorqued to the correct setting so we can do the wheel bearing and CV boot replacement at home. They're on that tight that with me on the foot brake and all Mike's strength on the scaffold bar you can hear the brakes beginning to let go. Someone has dogged these up WAY too tight. Sounds like the Mazda. Even with heat, the scaffy bar bent a fair way before the hubnut finally released. Link to comment Share on other sites More sharing options...
red5 Posted March 10, 2019 Share Posted March 10, 2019 Well your only 224 miles away,so if you are prepared to travel you can have a drive. :grinning-smiley-043: Pfff. I snort with derision at your distance. Bugger. I do love the 2 1/2 though. What a jewel of an engine. My 2nd ever generator (dc) change as a mechanic was on one of those in a SP250/Dart (to suit). The old boy in the wroshop showed me how to reverse the polarity (flashed) after I'd fitted it. The driver had some lunch in the next door pub whilst he waited.What a glorious sound to my young ears. Link to comment Share on other sites More sharing options...
Timewaster Posted March 10, 2019 Share Posted March 10, 2019 Sounds like the Mazda. Even with heat, the scaffy bar bent a fair way before the hubnut finally released.Bloody Hubnuts. What a pain they are. Link to comment Share on other sites More sharing options...
Chris2cv Posted March 10, 2019 Share Posted March 10, 2019 Went to get the 2cv out this morning, and the garage door blew shut 3 times while I was getting it started. "It'll be fine!" I thought. Drove up across Manston and had a bit of crosswind nearly blow me across the road, then down towards Margate where I had to fix the passenger window open as the wind kept opening it! Headed along the front, where I was struggling to stay on the road, it felt like I was being pushed backwards harder than the engine was pushing me forwards! Not that hard admittedly. After really struggling to head inland, I thought "bugger this!" and got the Stepway out instead. No more problems as it is at least double the weight and not made of tin foil stretched over twigs! Apparently the roof came off of Tesco! Quite a lot of damage around, but hopefully nobody hurt. GrumpiusMaximus 1 Link to comment Share on other sites More sharing options...
dozeydustman Posted March 10, 2019 Share Posted March 10, 2019 Managed to bodge the 944's wiper mechanism back together. It simply clips back together but kept jumping out. IMG_20190307_180719.jpg I bought one of these clips. I knew it wouldn't fit but was hoping I could fudge it. IMG_20190310_074036.jpg A bit of fiddling with a pair of pliers and and angle grinder and it was on. IMG_20190309_134342.jpg Seems to be holding fine for now. Will see how it gets on before I try owt else. Next step would be to drill a hole through it and bolt/splitpin it. I used some of those on the Corolla, got from eBay for about a fiver for a pair. Still holding the linkage together 3 years on Link to comment Share on other sites More sharing options...
Split_Pin Posted March 10, 2019 Share Posted March 10, 2019 Took the Clio 172 out for a blast today to meet up with Dave_Hedgehoff31 Esq. It's going really well after I fitted the new injectors. But after a passenger ride in his C5, I cannot deny that I am 100% into the waft territory of my life. I'm too old to be blasting about in a raucous wee pocket-rocket and prefer taking it easy nowadays. I am also recovering from a minor operation Friday past and the hard suspension of the Clio was not ideal today. The Audi is good at wafting too but it's not up there with the best of them, like my old 75 and such like. It looks and feels excellent though so I'm keeping that one. I'm going to use the Clio this week and see how I feel. The Moog and mrbenn 2 Link to comment Share on other sites More sharing options...
GrumpiusMaximus Posted March 10, 2019 Share Posted March 10, 2019 Went to get the 2cv out this morning, and the garage door blew shut 3 times while I was getting it started. "It'll be fine!" I thought. Drove up across Manston and had a bit of crosswind nearly blow me across the road, then down towards Margate where I had to fix the passenger window open as the wind kept opening it! Headed along the front, where I was struggling to stay on the road, it felt like I was being pushed backwards harder than the engine was pushing me forwards! Not that hard admittedly. After really struggling to head inland, I thought "bugger this!" and got the Stepway out instead. No more problems as it is at least double the weight and not made of tin foil stretched over twigs! Apparently the roof came off of Tesco! Quite a lot of damage around, but hopefully nobody hurt. Didn't realise you were that close! We regularly end up at Westwood Cross. I was getting blown around this morning in the Golf of Many Dents and that's made mainly of iron. 2CV must have been fucking terrifying. Link to comment Share on other sites More sharing options...
mrbenn Posted March 10, 2019 Share Posted March 10, 2019 I am also recovering from a minor operation Friday past and the hard suspension of the Clio was not ideal today. Best wishes with that. Lord Sterling, Split_Pin and GrumpiusMaximus 3 Link to comment Share on other sites More sharing options...
Split_Pin Posted March 10, 2019 Share Posted March 10, 2019 Best wishes with that.Cheers chap mrbenn 1 Link to comment Share on other sites More sharing options...
Lord Sterling Posted March 10, 2019 Share Posted March 10, 2019 I am also recovering from a minor operation Friday past and the hard suspension of the Clio was not ideal today.Hope you feel better soon man! GrumpiusMaximus and Split_Pin 2 Link to comment Share on other sites More sharing options...
somewhatfoolish Posted March 10, 2019 Share Posted March 10, 2019 Mike had time to lend a hand. Even with a scaffold bar, me on the footbrake, and all Mike's strength neither front hub nut will budge. They're both FAR too tight. Going to see if a local garage can get them off with the big gun and then retorqued to the correct setting so we can do the wheel bearing and CV boot replacement at home. They're on that tight that with me on the foot brake and all Mike's strength on the scaffold bar you can hear the brakes beginning to let go. Someone has dogged these up WAY too tight.Surprising the bearings have lasted as long as they have, being that tight they would be under huge pressure even when cold, once at motorway speeds the pressure would be horrific. Link to comment Share on other sites More sharing options...
Asimo Posted March 11, 2019 Share Posted March 11, 2019 The way the Princess hub works the bearings are not crushed up by the hub nut. Clearance is set by the tolerances of the parts and the spacer piece between the bearings. Still shouldn't be that hard to undo however, but time and rust and gorillas in it's past.... I used to undo with a big ring spanner which I stood on and whilst standing on it, whacked the spanner with a big hammer. (Mind your toes) Christine and alf892 2 Link to comment Share on other sites More sharing options...
dome Posted March 11, 2019 Share Posted March 11, 2019 Exploder dropped off for an MOT this morning. Eep Sent from my Moto G (5) Plus using Tapatalk problemhamster, egg, Timewaster and 9 others 12 Link to comment Share on other sites More sharing options...
The Moog Posted March 11, 2019 Share Posted March 11, 2019 I reckon it will be a straight pass Link to comment Share on other sites More sharing options...
barefoot Posted March 11, 2019 Share Posted March 11, 2019 Did you know that Interpol has 194 member countries and employs 756 staff?I can rest easy in my bed knowing that there's 3.8 folk looking after the UK. puddlethumper and Rusty_Rocket 2 Link to comment Share on other sites More sharing options...
Eddie Honda Posted March 11, 2019 Share Posted March 11, 2019 Did you know that Interpol has 194 member countries and employs 756 staff?I can rest easy in my bed knowing that there's 3.8 folk looking after the UK. And when a case can't be solved by Interpol, they call in Department S. barefoot and mercrocker 2 Link to comment Share on other sites More sharing options...
barefoot Posted March 11, 2019 Share Posted March 11, 2019 My mate Alan has just bought a Porsche. Like my 944 his is not a proper Porsche either.Sadly, his is a Macan.Dismayed by the lukewarm reception his car receives, he has invited me to join him in setting up our own club. We've solved all the petty falling out thing, by decreeing that there will only ever be two members. The Moog, Datsuncog, Skizzer and 8 others 11 Link to comment Share on other sites More sharing options...
320touring Posted March 11, 2019 Share Posted March 11, 2019 With 3 stickers, one of you needs another car! barefoot and tooSavvy 2 Link to comment Share on other sites More sharing options...
SierraMikeHotel Posted March 11, 2019 Share Posted March 11, 2019 There was an Austin ambassador in the guardian money help pages yesterday.I saw my mum at the weekend. She has absolutely no interest in cars so I was quite surprised when she said, "I read something in the paper about an Austin Ambassador and now I can't get that blooming song out of my head!" adw1977, Chris2cv, mercrocker and 3 others 6 Link to comment Share on other sites More sharing options...
SierraMikeHotel Posted March 11, 2019 Share Posted March 11, 2019 My mate Alan has just bought a Porsche. P1140084.JPGSee you at Cropredy? Asimo and barefoot 2 Link to comment Share on other sites More sharing options...
barefoot Posted March 11, 2019 Share Posted March 11, 2019 Sadly, Gogol Bordello rules it out for me. Link to comment Share on other sites More sharing options...
Jim Bell Posted March 11, 2019 Share Posted March 11, 2019 Did you know that Interpol has 194 member countries and employs 756 staff?I can rest easy in my bed knowing that there's 3.8 folk looking after the UK.They still find time to record and tour too. The Moog, Ghosty, GrumpyCat and 4 others 7 Link to comment Share on other sites More sharing options...
stuboy Posted March 11, 2019 Share Posted March 11, 2019 Lights turned up today that i expected to get lost in post, quality delivery service by herpes damaging the box but all seems intact. My plan is to tint them egg and mrbenn 2 Link to comment Share on other sites More sharing options...
egg Posted March 11, 2019 Share Posted March 11, 2019 If it's car parts they always seem to break the box! mrbenn 1 Link to comment Share on other sites More sharing options...
320touring Posted March 11, 2019 Share Posted March 11, 2019 Sadly, Gogol Bordello rules it out for me.Start wearing purple and you'll be fine.. barefoot 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now