Jump to content

Styled in Italy, built in Britain - The story of the blue Ital Van


trigger

Recommended Posts

Is the front bumper and grill special on that transit? it seems to stick out more than they usually do, but then again I have drank a LOT of beer since I last saw one of these.

 

looks like they did a facelift before smiley face and changed the lights, grille and a different bumper which was then used on the smileys

Link to comment
Share on other sites

I got my long shaft out yesterday and made a awful mess and now I can't get it back in again!

 

Dad came over to help me (i.e do the job for me) change the rear hub seals, the half shaft came out easy enough and in fact the whole job wasn't bad. The old seals were rock solid so that would be the problem.

 

f66d88ec16010e17d7cbdab851eeaddc.jpg

 

The new bearings are sealed rather than exposed like the old ones but they pressed in ok with use of a large socket and vice.

 

ff89b4e358ad205f52115e4760ed6488.jpg

 

The only issue now is that the hub nut is a 48mm and we only had a 46 or 50mm and none of the local shops sold 48mm's so we couldn't finish the job, dad's going to see if he borrow on before I have to spend £20 for one of eBay then it's a case of topping up the axle again with EP90 and road testing!

 

5c7a6cc4926517ef4d92c2f42df4b59e.jpg

Link to comment
Share on other sites

I always prefered the Mk1 Onion, never liked the fisherprice dash in that version. It's still a bloody lovely thing though & deserves saving.

Link to comment
Share on other sites

Oh axle nut wise, box spanners might be cheaper. I don't recall the size but LRs used similar so I've got one somewhere from those days & it was cheaper than a socket.

Link to comment
Share on other sites

I wonder how a Marina would be with an A40 box? Or a Dolly Sprint engine?

 

The Marinas they sent to Australia had the Maxi engine and gearbox and were front wheel drive.

So, from quite shit to even shitter.

Marina vans in NZ often came fitted with a CNG conversion which meant almost free motoring on the North Island anyway but adding 200kg of tank ate into the load carrying ability and took the edge off the performance*.

Link to comment
Share on other sites

  • 2 weeks later...

Wowsers on the Ghia in the barn..... very very nice.

 

On the boot self-shutting - an ex GF had one on a H plate when it was only 4yrs old, same boot spoiler and it wouldn't stay open even then. Far too heavy for the supports. I always forgot and always got a wack on the back of the bonse for it......... bit like the ex actually.

 

Top work on the van fella - looks a dream* drive. Envy just doesn't come close - that is top chod of the finest order.

Link to comment
Share on other sites

  • 2 weeks later...

I always prefered the Mk1 Onion, never liked the fisherprice dash in that version. It's still a bloody lovely thing though & deserves saving.

The only bonus with the Fisher price dash of the mk2 onion/ mk4 escort is they don't crack like the previous model

Link to comment
Share on other sites

The only issue now is that the hub nut is a 48mm and we only had a 46 or 50mm and none of the local shops sold 48mm's so we couldn't finish the job

Easy enough to make an adapter to lose 2mm on a big socket - just make a hexagon shim from a bit of steeel, like this one I made for Princess / Ambassador hub nuts and 32mm ring spanner.

 

post-17481-0-97376500-1521134702_thumb.jpeg

Link to comment
Share on other sites

  • 2 months later...

In between in bouts of shitness I've managed to spent a few hours this week on the van, I didn't do a very good job painting the front wing, part of it was done with one kind of paint and the other half with another and it had clouded up where the two joined and looked really patchy so I've gone over it again all with the same can.

 

2bd4b0ca96edc685394525c0c25313a9.jpg

 

I'm really pleased again with how well it's come out for a rattle can. I also spent some time giving the whole van a polish again

 

c79f9c2b0cea8ba6ec89cf8692381cc5.jpg

 

And I've repaired the hanging headlining now.

 

cc6f6cdbf92a240dca1874724251ede0.jpg

 

I've also fitted the roof rack this evening, the jury is out on this one though, I think it would work but it's far too shiny I think? I was planning on fitting a paint covered old wooden ladder on it?

 

b944406ffc9fcf5995b48617d333d025.jpg

 

0a5a7b2a327e3bf28b56498c537ee028.jpg

 

1f719068e9efa7fd16c993bb3ab4a93c.jpg

 

Mechanical it's a bit poorly at the moment, I used it for work for a few days last week and that was enough to kill the diff pinion seal and that's leaking everywhere now and the little link pipe between the water pump and head has failed, I'm not surprised though as that was rotten to hell! All those years in the barn hasn't helped the perishables!

 

5bdb6835ba32d59b4f3529f132033747.jpg

Link to comment
Share on other sites

Today me and the old man tackled the leaking diff pinion seal and the little water bypass pipe, that was easy enough but the seal took a few hours, the old one was rock hard so no wonder it leaked. It's now much better though, I took the van for a run around the block and got a photo of the roof rack outside.

 

258e56e5cfbd93f01fd437ac114d7757.jpg

 

I then decided to sex it up a bit with a ladder, does it give you wood?

 

fbb62a8dd7d941d4a8cf117aa63178ad.jpg

 

bf8b684c14da47bfb0b981b865669b05.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...